Anvil by Vestratto
- Thread starter PlanetHaze
- Start date
Awesome support! Hoping to start pre-orders very soon. Units available will be limited until production timing gets rolling. Our goal was to have first pre-orders in customers hands for the US Thanksgiving weekend. We know the Anvil will be needed by many this year to get through the in-laws thanksgiving dinner
Don't hold us to any promised dates, it is our goal but not for sure. 
hoyo77
Well-Known Member
What will come in the box?? And do you anticipate the concentrate pads being ready by shipping? i know someone asked about using a more powerful lighter to shorten heatup times but if one did that would that deter from the vaping experience and flavor?? i dont mind long heatup times i have an elev8tr and 30-45 seconds is average for that vape when using a torch.
anasrzi
Well-Known Member
Is a magnetic stand in the pipeline too @PlanetHaze much like the VC range. Another gripe I had with the dyna was once heated and cooling off there was no where to place it down (obviously that's been sorted with the induction heaters fitted with a mag plate or a wooden storage tin etc). Those Linx pads for concentrates look great but I don't love to see what you come up with as a specific anvil concentrate solution, all I can think of is Heath stones like in a elevator?
The pre-order package and pricing hasn't been determined yet. The concentrate pads that we use currently are LINX Eden Lava Plates they come 3 to a pack, use all 3 to make a concentrate Big Mac with the lava plates as the buns and concentrate as the patties. Once stacked, they fit perfectly. A specific anvil concentrate solution will not be available when Anvil starts shipping, it is still in development.
Torch selection is more of a personal choice, The chance of temperature over-shoot increases with more heat being applied. Since the Anvil's temp sensor is measuring the actual bowl temp, when it clicks, the herb is in the ideal temp window to achieve one hit full extraction. If you throw so much heat at it to try and decrease heat up time by a noticeable amount, you will have a harder time staying in the ideal heat zone and risk combustion. Anvil cannot be effectively heated in 10 seconds, it is a very precisely engineered and machined instrument of vapor destruction. Tolerances we are talking about are less than a human hair and the scientific principals in play work together for an entourage effect and heat soak time of the mass is part of the science.
We have heard of a magnetic stand, but haven't seen it in person yet. However, we should have mentioned the awesome custom made aluminum storage tube the Anvil has. The case's cap that unscrews has a magnet embedded as does the bottom of each herb chamber. The magnetic cap can unscrew and hold a hot chamber or be used to put a hot Anvil back in the aluminum case. You can put the Anvil away while it is still hot, just heat it, rip a full bowl in one hit and put it away in the case and put it in your pocket before you exhale
Heath stones are an interesting idea. We are willing to consider all ideas to arrive at the very best solution. PlanetHaze will gift any FC member a free Anvil Concentrate Chamber if your original design idea is the winner. So far we have @anasrzi with Health Stone suggestion. Please post a diagram of your original idea so no one can copy it. Earliest post of same suggestion qualifies.
Some more Anvil goodness, look at those curves
Some Halloween fun hitting the Anvil natively.
Happy Halloween Everyone!
Happy Halloween Everyone!
Clapped_r6
bass in your face
Sweet! I need one!
PaperClouds
Well-Known Member
How’s it going FC? I’ve been lucky enough to have an Anvil for about 2 weeks now and all I can say is wow. I am not a Dynavap fan, to me they’re very harsh, but I love their construction. When I this saw this was a different heating system with a similar build I was immediately interested. Since I’ve gotten the Anvil it just keeps blowing me away the more I use it. No needing to spin means no real learning curve just aim the flame, wait for the click and hold on. I dare to say that it also makes it the fastest heavy hitter in the west from a cold start. The ABV is this thing produces has been incredibly even every time without fail so far. The thickness of the vapor and the overall pull on it remind of the Supreme most just in a much smaller package. Using it dry is like a “vapor joint”, it works well regardless if you take small puffs or try and chong it one hit.
Heres two bowls back to back the first is a hit from cold, heating right above the bottom copper ring. The second was heated at the same area while the unit was warm
The resulting ABV
Second bowl
ABV
I know some of you are on Instagram, thevapotorium is my page. I have pretty frequent story posts and go live with the Anvil as well.
Heres two bowls back to back the first is a hit from cold, heating right above the bottom copper ring. The second was heated at the same area while the unit was warm
Second bowl
ABV
I know some of you are on Instagram, thevapotorium is my page. I have pretty frequent story posts and go live with the Anvil as well.
Thanks for the offer, but the Anvil has been tested plenty.
Yes absolutely we ship worldwide. There are no batteries needed, so Anvil can ship Internationally by air.
hoyo77
Well-Known Member
I own 3 different supremes and if it produces dense smoke like vapor like that of a supreme....i am all in. supreme has densest vapor of any vape i have seen.How’s it going FC? I’ve been lucky enough to have an Anvil for about 2 weeks now and all I can say is wow. I am not a Dynavap fan, to me they’re very harsh, but I love their construction. When I this saw this was a different heating system with a similar build I was immediately interested. Since I’ve gotten the Anvil it just keeps blowing me away the more I use it. No needing to spin means no real learning curve just aim the flame, wait for the click and hold on. I dare to say that it also makes it the fastest heavy hitter in the west from a cold start. The ABV is this thing produces has been incredibly even every time without fail so far. The thickness of the vapor and the overall pull on it remind of the Supreme most just in a much smaller package. Using it dry is like a “vapor joint”, it works well regardless if you take small puffs or try and chong it one hit.
Heres two bowls back to back the first is a hit from cold, heating right above the bottom copper ring. The second was heated at the same area while the unit was warm
The resulting ABV
Second bowl
ABV
I know some of you are on Instagram, thevapotorium is my page. I have pretty frequent story posts and go live with the Anvil as well.
Hell yeah
The Supreme Vape is one of the all time greatest vapes and the thick vapor it puts out was a real inspiration to the Anvil's performance. The Anvil is honored to be described as a portable Supreme vape.Odds are good, will be close factoring in shipping times. Thanks for your interest.
Hi @Severmore That is always on people's minds, wanting the latest revision of anything we buy, just human nature. The Anvil is in production so no design revisions until possibly later batches. Any changes now will most likely only be cosmetic like heat-shield anodization colors, packaging etc. Sometimes we wait and wait for a revised product and no revision comes for months and after waiting all that time, all that got changed was the packaging and a price increase
PaperClouds
Well-Known Member
It’s what it reminds the most. My good friend moved in downstairs and has a V3 and a V6 so I’ll be doing a direct comparison soon. I’ll post some videos.
This actually brings up a good point! What are we looking at price-wise for the entry level setup, as well as the full setup with both oven options (convection and conduction)? Do you have a pricing structure established yet?Sometimes we wait and wait for a revised product and no revision comes for months and after waiting all that time, all that got changed was the packaging and a price increase
PaperClouds
Well-Known Member
It’s no surprise the Anvil also delivers with concentrates. The best DIY setup I’ve found so far is by cutting two screens so they can folded in half and put in the bowl. You then sandwich your dab in one of the screens, put that in the bowl first then put the other screen atop it. You can’t put much in, maybe .03-.05 but like bud it vaporizes it in one hit.
Here’s the results from cold heating the bottom copper ring directly.
Here’s the results from cold heating the bottom copper ring directly.
We are going to be starting pre-orders on or about Monday November 8, 2021. Shipping is expected in under 2 weeks from order date. The pre-order kit will be at a special price of 199.95 USD and includes:
- 1 x Anvil CopperCore Vaporizer
- 1 x Straight Walled Full Size Herb Chamber
- 1 x Straight Walled Half Size Herb Chamber
- 1 x Magnetic Stand
Sorry about that, we should have listed both currencies. 199.95 USD current conversion will be 249.95 CAD. Rate right now is 1 USD = 1.24 CAD
hoyo77
Well-Known Member
Thanks bro....the supreme is a beast and if this thing is even close it will be worth having has a portable to have when i am out and about...used many torch vapes out in public...care less about the crack head look hell i am trying to medicate!!!
hoyo77
Well-Known Member
Case to carry in??We are going to be starting pre-orders on or about Monday November 8, 2021. Shipping is expected in under 2 weeks from order date. The pre-order kit will be at a special price of 199.95 USD and includes:
These are limited supply so if you are considering getting an Anvil, please order early to take advantage of this introductory offer. Follow this thread to receive announcements of pre-order launch.
- 1 x Anvil CopperCore Vaporizer
- 1 x Straight Walled Full Size Herb Chamber
- 1 x Straight Walled Half Size Herb Chamber
- 1 x Magnetic Stand