Firewood Vaporizer

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
I really liked the look of that 'L' hook from Oregan Glass, but couldn't find a male version.

Yeah OGB can customize whatever you want in the shop, it will cost more, but he can definitely make that L hook with a 14 mm male I bet... I have one that is 18 mm female, so I just use a male to male adapter, so I can use it with many other vapes as well (especially because I got a 14 mm male custom micro hook elsewhere for my FW7)

Just be advised it can get pretty expensive when you customize, his glass work is great though, the glass is super thick, but yeah cooling spikes are especially difficult for him, as you can see by price of that crazy hook!
 

Jason Mendoza

Well-Known Member
FW7 in stock right now. Friday april 16, 7:13 AM est.

Who in the EU is looking for a FW? Mine are shipping soon and I will ship to you, at your cost plus any transaction fees I'd be out of pocket on. Here's a post office address you can use. I'm not in that city/state (don't want to give my self away to everybody) but it should be real close if not the same shipping cost. We can do the transaction on the classifieds for both of our protection. You get the quote and I'll add that to the cost of the FW. I'll have extra parts you can buy for retail too. Won't gouge you. Just cost plus what I'd be out of pocket for going thru the transaction. (paypal fees)

Post Office
108 SW 1ST ST PINETOPS, NC 27864-9998

Easywider said:
He's using the BB9 stem with the FW and connecting it to this J Hook ( I think )
https://oregonglassblower.com/14mm-GLASS-J-HOOK-WITH-COOLING-SPIKES-jh-c.htm
I almost got thru checkout on that massive j hook but thought wait....how do you clean that bad boy??
I have the O'connel inception j hook and used it just the past 3 days. The vapor is so much cooler and easier to vape at the higher heat needed to medicate all the way. It's a dimpled cooling stem WITHIN the j hook. I never tasted the vapor until then!
 
Last edited:

Spike11552

Well-Known Member
FW7 in stock right now. Friday april 16, 7:13 AM est.

Who in the EU is looking for a FW? Mine are shipping soon and I will ship to you, at your cost plus any transaction fees I'd be out of pocket on. Here's a post office address you can use. I'm not in that city/state (don't want to give my self away to everybody) but it should be real close if not the same shipping cost. We can do the transaction on the classifieds for both of our protection. You get the quote and I'll add that to the cost of the FW. I'll have extra parts you can buy for retail too. Won't gouge you. Just cost plus what I'd be out of pocket for going thru the transaction. (paypal fees)

Post Office
108 SW 1ST ST PINETOPS, NC 27864-9998


I almost got thru checkout on that massive j hook but thought wait....how do you clean that bad boy??
I have the O'connel inception j hook and used it just the past 3 days. The vapor is so much cooler and easier to vape at the higher heat needed to medicate all the way. It's a dimpled cooling stem WITHIN the j hook. I never tasted the vapor until then!
Wow that is so generous of you to do for our fellow Europeans. And I actually had that same exact thought as I was staring at it in my cart haha. I’m gonna check out that O’Connell jhook you’re talking about.
 

Jason Mendoza

Well-Known Member
Wow that is so generous of you to do for our fellow Europeans. And I actually had that same exact thought as I was staring at it in my cart haha. I’m gonna check out that O’Connell jhook you’re talking about.
cool. Imma send you a dm with a pick of it. Hope that's ok.
 
Jason Mendoza,

Zangano Cruel

IG zan.cru (code) zancru (5% NV checkout discount)
I'm from Aus we spell it the English way. Do you por a drink?, no you pour a drink, then it is vapour not vapor. 🥱 Americans drop the u whenever they can. Fair enough saves typing but looks wrong to my Aussie eyes.
I sometimes add a short piece of silicone onto the cooling stem for extra cooling, but I would only add 6 or 8 inch length and it cools well enough for me. You must be fairly sensitive to heat. The j hook should be better because the bend forces more contact. Next option is a water pipe.
The Dynavap stems fit, so search for a dynavap stem with 14mm joint, no carb. Got mine on Dhgate for a few bucks each.
Vapor or vapour comes from the Latin word VAPOREM, so, you can either speak it “vapor or vapour” and you’ll still be speaking it “different” than the original one.
And VAPOREM don’t carry a U, maaaaate!!!
I always like to remember “imperial anglo descendants”, that the world don’t revolve ONLY around their language, 😂😂🤣🤣, that before they started invading/slaving everywhere/everyone, WAY MORE BEAUTIFUL Languages were already spoken than anglo dialects.
Besides, australian english isn’t that precise, and from all the english dialects I listen and I read, australian is the worst imho & e.
Stay vaped maaate!!!
 

Jason Mendoza

Well-Known Member
It’s full convection and just has a batter feel to it. The bowl is even smaller than a mighty though so if you need a lot you’ll have to pack multiple and carry them around. I found it great for microdosing on the go.
I don't need capsules with the FW because I use the unrimmed baskets and the loading bay is easy to access. It has a flat area around it that I sweep any flakes right into the basket. If the chamber area were larger, you'd probably have to stop and stir. It might be possible that you won't save time with a larger basket (like the mighty) because you have to stop and stir. I don't use it for microdosing. The basket fits so snug that it doesn't come out when I flip it over to dump the avb. I carry the FW and a pepto travel container for the avb and another with fresh bud. Sounds so easy doesn't it? It's super stealth and feels comfortable in my hand.

I wear a size M or L in men's gloves so it's not because I have small hands.
 
Jason Mendoza,

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
FW7 in stock right now. Friday april 16, 7:13 AM est.

Who in the EU is looking for a FW? Mine are shipping soon and I will ship to you, at your cost plus any transaction fees I'd be out of pocket on. Here's a post office address you can use. I'm not in that city/state (don't want to give my self away to everybody) but it should be real close if not the same shipping cost. We can do the transaction on the classifieds for both of our protection. You get the quote and I'll add that to the cost of the FW. I'll have extra parts you can buy for retail too. Won't gouge you. Just cost plus what I'd be out of pocket for going thru the transaction. (paypal fees)

Post Office
108 SW 1ST ST PINETOPS, NC 27864-9998


I almost got thru checkout on that massive j hook but thought wait....how do you clean that bad boy??
I have the O'connel inception j hook and used it just the past 3 days. The vapor is so much cooler and easier to vape at the higher heat needed to medicate all the way. It's a dimpled cooling stem WITHIN the j hook. I never tasted the vapor until then!

Super generous! Bet you get a lot of PM's

Wow that is so generous of you to do for our fellow Europeans. And I actually had that same exact thought as I was staring at it in my cart haha. I’m gonna check out that O’Connell jhook you’re talking about.

Yeah the O'Connell J hook is very nice, I have one thanks to @Ripstar though I have not yet tried it with my FW7 because I need to dig out the 14 to 14 male I have somewhere, I have been using 14 to 18 only... My go-to in standard configuration has been with the O'Connell Dyna inception stem though the standard hula stem is overall better I think?
 

Jason Mendoza

Well-Known Member
Super generous! Bet you get a lot of PM's



Yeah the O'Connell J hook is very nice, I have one thanks to @Ripstar though I have not yet tried it with my FW7 because I need to dig out the 14 to 14 male I have somewhere, I have been using 14 to 18 only... My go-to in standard configuration has been with the O'Connell Dyna inception stem though the standard hula stem is overall better I think?
I like the one that comes withe the FW b/c of the wooden thumb push. I bought the mist vape beaded stem but went back to the FW stem and bought more so I can collect them for milk.
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
I like the one that comes withe the FW b/c of the wooden thumb push. I bought the mist vape beaded stem but went back to the FW stem and bought more so I can collect them for milk.

You mean the old stock stem without the cooling? That one's not available anymore, it is just the cooling stem set up now... I have not tried my old stock stem with the wooden mouthpiece block, don't feel much motivation to after the original original where it got too hot on my lips, though I'm sure this one does not have that problem?
 
Shit Snacks,
  • Like
Reactions: ezpz

west-elec

Well-Known Member
A little distance can make a big difference when it comes to cooling. I was marveling at the improved cooling with my new mouthpiece, but compared side by side the only difference to the OG cooling tube setup is the glass joint and width of the WPA, maybe 25mm, then that hard 90 degree. It's 13mm OD compared with 12.5 for OG, and OG has short thin section, so almost the same but big difference in cooling. The short elbow on OG is probably the big difference not really being enough distance to get much elbow cooling effect.
You can also tell a lot by the way the resin builds up on the glass. Nice even coating means good even airflow. This is now my full portable setup, I just have to wrap the L hook seperate, worth the breakage risk for such hits.
20210419_171239.jpg
 
Last edited:

Texus

Well-Known Member
A little distance can make a big difference when it comes to cooling. I was marveling at the improved cooling with my new mouthpiece, but compared side by side the only difference to the OG cooling tube setup is the glass joint and width of the WPA, maybe 25mm, then that hard 90 degree. It's 13mm OD compared with 12.5 for OG, and OG has short thin section, so almost the same but big difference in cooling. The short elbow on OG is probably the big difference not really being enough distance to get much elbow cooling effect.
You can also tell a lot by the way the resin builds up on the glass. Nice even coating means good even airflow. This is now my full portable setup, I just have to wrap the L hook seperate, worth the breakage risk for such hits.
View attachment 7288
Sorry if I missed it earlier, where did you get the L-hook?
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
A little distance can make a big difference when it comes to cooling. I was marveling at the improved cooling with my new mouthpiece, but compared side by side the only difference to the OG cooling tube setup is the glass joint and width of the WPA, maybe 25mm, then that hard 90 degree. It's 13mm OD compared with 12.5 for OG, and OG has short thin section, so almost the same but big difference in cooling. The short elbow on OG is probably the big difference not really being enough distance to get much elbow cooling effect.
You can also tell a lot by the way the resin builds up on the glass. Nice even coating means good even airflow. This is now my full portable setup, I just have to wrap the L hook seperate, worth the breakage risk for such hits.
View attachment 7288

Looking great! So this was a local custom you were able to have made, I bet OGB can make these for people, as a customized version of the 14 mm female spiked L hook he is offering on his website...

I had this design idea too (without the spikes), before I went with this triple right angle bend facing other direction instead:

PXL-20210419-192225738.jpg


Anyone know if there are any dosing caps that fit the FW7?

Dosing capsules would only hurt performance here, you want the herb to be in contact with the ceramic oven chamber, if you tried to add capsules you are just weakening the efficiency and extraction capabilities here...
 

cliffhanger1

Well-Known Member
I rcvd an email with tracking via shopify app, which was a pleasure to use. Quickest app download and set up.

How much of a pita is shipping to EU/Germany? I'll have an extra FW soon enough. I ordered 2 more (3 weeks apart). B/C I wanted the upgraded stem and can't seem to get it in stock. Finally said, F it. Order a whole unit and sell the un upgraded one. Also bought new oven and more stems.

I have the mist vape beaded stem but I like being able to push the stem up with the wood. I also don't understand how the larger diameter stem makes a difference. If the skinny stem is a reducer or the mistvape stem is an expander, isn't the pathyway always restricted by it's most narrow path? Thinking of how air ducts and plumbing pieces work, it seems like it wouldn't make a difference.
to me he sais he dont ships to germany :o
 

Spike11552

Well-Known Member
Had anybody tested the bb9 stem from dynavap or inception by O’Connor? I was kicking around the idea of buying an inception stem but wanted to hear feedback on someone that’s tried both (if anyone has)
 
Spike11552,

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Had anybody tested the bb9 stem from dynavap or inception by O’Connor? I was kicking around the idea of buying an inception stem but wanted to hear feedback on someone that’s tried both (if anyone has)

Yes a lot of us have (and mostly use) the inception stem, just use the search feature at the top for inception in this thread and you will find all the reviews! Unfortunately BB9 may be too small to search for...
 
Top Bottom