And the site says that they welcome custom requests. So maybe a good option for a L-shaped hook with a 14mm male that can go into the WPA...He's using the BB9 stem with the FW and connecting it to this J Hook ( I think )
And the site says that they welcome custom requests. So maybe a good option for a L-shaped hook with a 14mm male that can go into the WPA...He's using the BB9 stem with the FW and connecting it to this J Hook ( I think )
I really liked the look of that 'L' hook from Oregan Glass, but couldn't find a male version.
Amazing...I love this Fcombuation community where else would I get my vape questions answered in minutes.He's using the BB9 stem with the FW and connecting it to this J Hook ( I think )
I almost got thru checkout on that massive j hook but thought wait....how do you clean that bad boy??Easywider said:
He's using the BB9 stem with the FW and connecting it to this J Hook ( I think )
https://oregonglassblower.com/14mm-GLASS-J-HOOK-WITH-COOLING-SPIKES-jh-c.htm
Wow that is so generous of you to do for our fellow Europeans. And I actually had that same exact thought as I was staring at it in my cart haha. I’m gonna check out that O’Connell jhook you’re talking about.FW7 in stock right now. Friday april 16, 7:13 AM est.
Who in the EU is looking for a FW? Mine are shipping soon and I will ship to you, at your cost plus any transaction fees I'd be out of pocket on. Here's a post office address you can use. I'm not in that city/state (don't want to give my self away to everybody) but it should be real close if not the same shipping cost. We can do the transaction on the classifieds for both of our protection. You get the quote and I'll add that to the cost of the FW. I'll have extra parts you can buy for retail too. Won't gouge you. Just cost plus what I'd be out of pocket for going thru the transaction. (paypal fees)
Post Office
108 SW 1ST ST PINETOPS, NC 27864-9998
I almost got thru checkout on that massive j hook but thought wait....how do you clean that bad boy??
I have the O'connel inception j hook and used it just the past 3 days. The vapor is so much cooler and easier to vape at the higher heat needed to medicate all the way. It's a dimpled cooling stem WITHIN the j hook. I never tasted the vapor until then!
cool. Imma send you a dm with a pick of it. Hope that's ok.Wow that is so generous of you to do for our fellow Europeans. And I actually had that same exact thought as I was staring at it in my cart haha. I’m gonna check out that O’Connell jhook you’re talking about.
Vapor or vapour comes from the Latin word VAPOREM, so, you can either speak it “vapor or vapour” and you’ll still be speaking it “different” than the original one.I'm from Aus we spell it the English way. Do you por a drink?, no you pour a drink, then it is vapour not vapor. Americans drop the u whenever they can. Fair enough saves typing but looks wrong to my Aussie eyes.
I sometimes add a short piece of silicone onto the cooling stem for extra cooling, but I would only add 6 or 8 inch length and it cools well enough for me. You must be fairly sensitive to heat. The j hook should be better because the bend forces more contact. Next option is a water pipe.
The Dynavap stems fit, so search for a dynavap stem with 14mm joint, no carb. Got mine on Dhgate for a few bucks each.
I don't need capsules with the FW because I use the unrimmed baskets and the loading bay is easy to access. It has a flat area around it that I sweep any flakes right into the basket. If the chamber area were larger, you'd probably have to stop and stir. It might be possible that you won't save time with a larger basket (like the mighty) because you have to stop and stir. I don't use it for microdosing. The basket fits so snug that it doesn't come out when I flip it over to dump the avb. I carry the FW and a pepto travel container for the avb and another with fresh bud. Sounds so easy doesn't it? It's super stealth and feels comfortable in my hand.It’s full convection and just has a batter feel to it. The bowl is even smaller than a mighty though so if you need a lot you’ll have to pack multiple and carry them around. I found it great for microdosing on the go.
FW7 in stock right now. Friday april 16, 7:13 AM est.
Who in the EU is looking for a FW? Mine are shipping soon and I will ship to you, at your cost plus any transaction fees I'd be out of pocket on. Here's a post office address you can use. I'm not in that city/state (don't want to give my self away to everybody) but it should be real close if not the same shipping cost. We can do the transaction on the classifieds for both of our protection. You get the quote and I'll add that to the cost of the FW. I'll have extra parts you can buy for retail too. Won't gouge you. Just cost plus what I'd be out of pocket for going thru the transaction. (paypal fees)
Post Office
108 SW 1ST ST PINETOPS, NC 27864-9998
I almost got thru checkout on that massive j hook but thought wait....how do you clean that bad boy??
I have the O'connel inception j hook and used it just the past 3 days. The vapor is so much cooler and easier to vape at the higher heat needed to medicate all the way. It's a dimpled cooling stem WITHIN the j hook. I never tasted the vapor until then!
Wow that is so generous of you to do for our fellow Europeans. And I actually had that same exact thought as I was staring at it in my cart haha. I’m gonna check out that O’Connell jhook you’re talking about.
Mine just arrived, with WPA. Going to clean the hula with iso, then let it rip. Wish me luck, folks.
Right on thanks, man! Cleaned and ready to rip. Going to chill out on 1st preset (340) and see what shakes.Load it around half full or so, give it a good tamp, consistent medium fine grind and don't draw too slow on the upper temps but you can milk that low temp first setting!
I like the one that comes withe the FW b/c of the wooden thumb push. I bought the mist vape beaded stem but went back to the FW stem and bought more so I can collect them for milk.Super generous! Bet you get a lot of PM's
Yeah the O'Connell J hook is very nice, I have one thanks to @Ripstar though I have not yet tried it with my FW7 because I need to dig out the 14 to 14 male I have somewhere, I have been using 14 to 18 only... My go-to in standard configuration has been with the O'Connell Dyna inception stem though the standard hula stem is overall better I think?
I like the one that comes withe the FW b/c of the wooden thumb push. I bought the mist vape beaded stem but went back to the FW stem and bought more so I can collect them for milk.
Fury 2/edge capsules fit. I tried once but it didn't workAnyone know if there are any dosing caps that fit the FW7?
Sorry if I missed it earlier, where did you get the L-hook?A little distance can make a big difference when it comes to cooling. I was marveling at the improved cooling with my new mouthpiece, but compared side by side the only difference to the OG cooling tube setup is the glass joint and width of the WPA, maybe 25mm, then that hard 90 degree. It's 13mm OD compared with 12.5 for OG, and OG has short thin section, so almost the same but big difference in cooling. The short elbow on OG is probably the big difference not really being enough distance to get much elbow cooling effect.
You can also tell a lot by the way the resin builds up on the glass. Nice even coating means good even airflow. This is now my full portable setup, I just have to wrap the L hook seperate, worth the breakage risk for such hits.
View attachment 7288
@west-elec found a new candy store in his neighborhood.Sorry if I missed it earlier, where did you get the L-hook?
A little distance can make a big difference when it comes to cooling. I was marveling at the improved cooling with my new mouthpiece, but compared side by side the only difference to the OG cooling tube setup is the glass joint and width of the WPA, maybe 25mm, then that hard 90 degree. It's 13mm OD compared with 12.5 for OG, and OG has short thin section, so almost the same but big difference in cooling. The short elbow on OG is probably the big difference not really being enough distance to get much elbow cooling effect.
You can also tell a lot by the way the resin builds up on the glass. Nice even coating means good even airflow. This is now my full portable setup, I just have to wrap the L hook seperate, worth the breakage risk for such hits.
View attachment 7288
Anyone know if there are any dosing caps that fit the FW7?
to me he sais he dont ships to germanyI rcvd an email with tracking via shopify app, which was a pleasure to use. Quickest app download and set up.
How much of a pita is shipping to EU/Germany? I'll have an extra FW soon enough. I ordered 2 more (3 weeks apart). B/C I wanted the upgraded stem and can't seem to get it in stock. Finally said, F it. Order a whole unit and sell the un upgraded one. Also bought new oven and more stems.
I have the mist vape beaded stem but I like being able to push the stem up with the wood. I also don't understand how the larger diameter stem makes a difference. If the skinny stem is a reducer or the mistvape stem is an expander, isn't the pathyway always restricted by it's most narrow path? Thinking of how air ducts and plumbing pieces work, it seems like it wouldn't make a difference.
to me he sais he dont ships to germany
Had anybody tested the bb9 stem from dynavap or inception by O’Connor? I was kicking around the idea of buying an inception stem but wanted to hear feedback on someone that’s tried both (if anyone has)