• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Herborizer corner

Abysmal Vapor

Supersniffer 2000 - robot fart detection device
Vaporisateur_TUB_4b4622101afec.jpg

Retro Herborizer :)
 

emily

Well-Known Member
Does anyone ever unplug their herbo once it's hot? I'd guess it would retail n heat for a minute or two once up to temp?
Yep! When I move it from one room to the next I unplug it while hot, pick it up from the base of the stand which remains cool, and then plug it back in in the other room. I notice it retains its heat pretty well and doesn’t take very long to get back up to temp
 

sparrowman

Well-Known Member
Mine has arrived, it is pretty damn awesome. Any tips.and tricks I should know about? Other than don't drop it which I did within the first five minutes, smashing the glass surrounding the heater. Fortunately had a spare.

Actually I'll go first:
Always order spares...
 

daoist

Well-Known Member
Use the stand after each hit. i like cold bowls. Also stir. I usually use temperature 7, which is 200 celsius). i would not go higher than 8 (210 celsius). i am not sure about the digi ti temperature controller scales. It is not fahrenheit nor celsius. It probably is 650 on the digi is 6.5 on the analogue or something like that. And 700 is 7 on analogue? I am not sure to be honest.
 
daoist,

Shadooz

Well-Known Member
It probably is 650 on the digi is 6.5 on the analogue or something like that. And 700 is 7 on analogue? I am not sure to be honest.
5 = 626F 6=716F it's just write on the notice...
And 5 for me gave roasted abv...
Also stir.
I never stir... that's where herborizer is above most. useless if u go around 0.1g

i would not go higher than 8 (210 celsius). i am not sure about the digi ti
I would no go higher than 5, notice says 190C herb temp but it's a bit more, i can compare with the crafty 190C

... 8 = 280C/536F herb or 440C/824F coil ...
Here people still fuck with combustion...

@sparrowman tame the beast ;)

@emily "La planete sauvage" ? :ko:
 
Last edited:
Shadooz,

daoist

Well-Known Member
Ah oke, I did not even realize that. I was talking out of my ass. I guess i was mixed up with the XL temperatures, which i also own. And i put that XL on 7. I have not used the Ti to much yet so i learned something new.
I guess 5 would be a better starting point on the analogue Ti. Well anyway here is a link to the manual.
 
daoist,
  • Like
Reactions: Shadooz

mmx

Well-Known Member
Yeah, for best flavour start at 4,5 (analogue Ti), for stronger hits go to 5 (that's my max lol).

When I first got it, I put the temperature on 8-9 so the Titanium burned in and got a really nice blueish colour ;) Looks dope.
 
mmx,
  • Like
Reactions: Shadooz

daoist

Well-Known Member
Yes the burn in has to be at 8, according to the manual. I will definately try the lower temps. I like low temps a bit better usually because easier on the throat and nice sativa effects. Mine is nice and blue now. I guess i missed the part that the heater has different temps than the XL. I will try it tommorow. Saturday is my Troy and Jerry Show day, so that is a good reason to pull out the herborizer again.
 
Last edited:
daoist,
  • Like
Reactions: Shadooz

Shadooz

Well-Known Member
Yeah, for best flavour start at 4,5 (analogue Ti), for stronger hits go to 5 (that's my max lol).

When I first got it, I put the temperature on 8-9 so the Titanium burned in and got a really nice blueish colour ;) Looks dope.
First one not going too high, THANKS YOU ! I'm not alone :cry:

Yes the burn in has to be at 8, according to the manual. I will definately try the lower temps. I like low temps a bit better usually because easier on the throat and nice sativa effects. Mine is nice and blue now. I guess i missed the part that the heater has different temps than the XL. I will try it tommorow. Saturday is my Troy and Jerry Show day.

I've got only one sativa, and she goes till the psychedelic effect, which can be too much. But a low temp of that one is the best in the morning ;) she is sweet and pleasant at low, and become sour and psychedelic at "high" temp
 

daoist

Well-Known Member
I need the Sativas to get my brain going. I don't consider it psychedelic but to me it is more mood uplifting and creative.
But I don't take that much. I am more of a microdoser nowadays. But everyone likes something different, so it is all good.
 
daoist,

daoist

Well-Known Member
Yes that may be for some. Or they just took to much. Everyone is different.
Regarding the headaches.: I read that if you cut off the leafs with sissors some of the leaf stem stays behind in the bud and that causes the headache. So it is best to pull out the leafs by hand so the stem does not stay behind. I thought this was an interesting fact. It could be that there are other factors as well.

It is also an interesting fact that sativas can both cause anxiety and fix anxiety. It is supposed to fix it mostly. But if you go crazy with the dosing than it gets out of hand.
 
daoist,

SquirrelMaster

Well-Known Member
I am interested in a herborizer, but I'm not sure which one. I want flavour which should be the XL but I also want the recovery time of the DigiTi. There isn't typically sales right? I will probably buy a flowerpot to go with my auber and then a herborizer in the future.
 
SquirrelMaster,

daoist

Well-Known Member
Well i own both the analogue ti and the XL. I would go for the Ti. Just for the simple reason that it is easier to pickup/lift from the bowl. because that stuff gets hot. the best most tasty hits ever i got from the XL. I have not tried the Ti to much yet, but i cannot confirm if the flavour is the same.

If you drop the XL heater you have to replace the entire heater if the glass breaks which will be around 99 euro.
If you drop the Ti and the glass breaks you can just replace the glass which is 12 euro. So this is probably a bit cheaper in the long run.

Also the Ti has a micro dose bowl with all glass including the filter,which should definately be a flavour improver. I have not tried it enough though to comment on it. I personaly think titanium is a bit better and less harsch than the steel from the XL. But it could be that i just have a sensitive throat.

If you want big loads like 0.5 gram (even more is possible) than the XL is what you need. The Ti can still easily have 0.2 or 0.3 gram i think.
Bot are great. But the XL just has a poor design for picking it up from the bowl, especially if your hands are a bit greasy or sweaty.
 
Last edited:

Abysmal Vapor

Supersniffer 2000 - robot fart detection device
@SquirrelMaster Get the Ti . I can smell the cable insulation on the XL on higher temps and longer heat soak. IT is right on the intake and above the heater ...On a side note i havent tried the Ti ,it still has a o-ring that holds the glass to the heater ,which might be possible source of off-taste,but at least it is not as close as the wire insulation on the XL
1618037586323.png1618037740706.png
 
Last edited:

daoist

Well-Known Member
Well i was hitting the herborizer Ti yesterday on 4.5 and 5 as recommended.
I almost did not get any clouds. I got very high though. But the ABV looked fairly green.

What am i doing wrong?
 
daoist,

Shadooz

Well-Known Member
Well i was hitting the herborizer Ti yesterday on 4.5 and 5 as recommended.
I almost did not get any clouds. I got very high though. But the ABV looked fairly green.

What am i doing wrong?
Did u heatsoak enough, even at 10 ?
It could be due to air leak too..

14mm or 18mm ?
Cause 5, my abv is brown, and got fast easy clouds, i even got clouds with 3min30s heatsoak and then 4 set
 
Last edited:
Shadooz,
  • Like
Reactions: mmx

daoist

Well-Known Member
No i did not heatsoak. With my XL i put it on 7 which is 200 celsius and still get good clouds.
With the Ti if i put it on 7 i got high but no visible vapor.

I will try some more today. see how it goes. how long do you usually heatsoak. I know on my XL i only need heatsoak a little bit if i am at 6.
But at 7 i can pretty much hit it right away. The Ti is new to me. Have not had the change to experiment a lot with it yet.
 
daoist,

Razshiro

Well-Known Member
Well i was hitting the herborizer Ti yesterday on 4.5 and 5 as recommended.
I almost did not get any clouds. I got very high though. But the ABV looked fairly green.

What am i doing wrong?
The heater can have some variation on the dial, some can't go above 6 on the dial, for me i'm betwen 5-6,2 for big HIT.... If you don't have any visible cloud at 7 it's not normal...... Oh and heat soak for like 5-10min should be enough, you can turn the dial at max for 5min and going back to 4.5-5.5 wait 1min and BOOM !!
 
Last edited:
Razshiro,

daoist

Well-Known Member
It works a bit better now after heatsoaking the bowl for about a minute and i put it at 5.5. Also it was a micro dose (barely covering the screen of the regular ti bowl) so it probably should not giving to big of a cloud anyway. I think finer grind will help.)
 
daoist,

daoist

Well-Known Member
Yes but I had very low dosage in the bowl. So it works a bit different as with full bowl.
 
daoist,

Shadooz

Well-Known Member
I had very low dosage in the bowl
I have to.

But with small tight 14mm bubbler, a ceramic heater base and a baking paper i can put the heater really low temp.

Try to more heatsoak the heater, alone, if you want to one hit. Maybe even 7min at 10
 
Last edited:
Shadooz,

Vape Soda

Sparkling !
It works a bit better now after heatsoaking the bowl for about a minute and i put it at 5.5. Also it was a micro dose (barely covering the screen of the regular ti bowl) so it probably should not giving to big of a cloud anyway. I think finer grind will help.)
How is the position of the Ti element, 5mm below glass sleeve like the manual says? Also check if the screw is tight, mine got loose over time and performance dropped until the Ti element slipped down.
 
Vape Soda,
Top Bottom