• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

vapenerd

Well-Known Member
Daaaaamn, I like it! What kind of battery life is that thing rockin?
I don't know if it came fully charged and I didn't count the clicks. So I can't tell you how good the battery life is. I'll have to wait till I get the new charger. The last shipping took 12 days so ask me again in two weeks.

Can you post a pic with in your hand? Do have a portside mini? I'd like to see a pic with it next to it.
I do not have a portside mini. I wish I had a better cam but sure, there you go:

75c4ed6cd733cf940505404346d3c01a8adb196c.jpg

234cfca27169707c2091554c60d7fab324406808.jpg
 
Last edited:

someTooL

Well-Known Member
Induction heating...take my money now:myday:

Butane heating is what kept my away (fear of burning myself and I would be going through a lot of butane lol) but after remembering the old days of my dugout and bat it was a no brainer.

So far I’ve seen pipes and Lucid. Not really interested in battery powered or a fancy design (although that puzzle one was quite cool) and plug in suits my at home needs. Both makers seem to have good standings in the community, any others I should view (DM me if this a taboo topic)?

I actually tried to be added to a waitlisting yesterday through Dynavap but was told no such thing and just check back.
 

Alexis

Well-Known Member
@Alexis The Mephisto genetics are very nice, aren't they? Love them with my Vapcaps!
Yes they are top notch, arguably if not surely the most potent of all Autoflowers out there currently, pushing well over 20% THC in many cases.

I chose Mephisto this time specifically for the quality. I was expecting and prepared for a lower yield as Mephisto explicitly state that they have always been focused on quality rather than quantity.

This certainly appeared to be the case and we we had a moderate haul of 250g from 5 Autos this time so not too bad, compared to the Dutch Passion monsters last summer with 875 grams from 8.

We are pleased though. This stuff is messing me up lol not kidding. It's amazing how little I am using all of a sudden in contrast.

Hope today is going well for you all. I do love this thread, sorry I don't come here very often but when I do I always feel so warmly accepted and accomodated by so many sincere, good and caring people. You are a very friendly and fun bunch, thank you everyone. :)
 

warren0728

Well-Known Member
Induction heating...take my money now:myday:
So far I’ve seen pipes and Lucid. Not really interested in battery powered or a fancy design (although that puzzle one was quite cool) and plug in suits my at home needs. Both makers seem to have good standings in the community, any others I should view (DM me if this a taboo topic)?

i have a @Pipes caldron and love it ... small ... simple ... discreet

i'm probably gonna get a portside mini from him too although honestly i would rather use 18650's since i have a bunch of them ... but i'm sure i would like the portside mini as much as my caldron.
 

Xclerk

The Universe is our endless supply
@stark1 @thejackalsmark the omni will fit and so will a Ti tip but the condenser goes in too far IMO and blocks off the airflow from the carb. A few might be long enough and @danielj is making me some small spavers to resolve the issue for people who want to run Omni and Ti and on the next batch they should be the proper length.
Very cool idea for the spacers. Excited to see the final outcome
 

danielj

Accessory Maker
Accessory Maker
IMG-7490.jpg





TRWW 2mmxl Spacer

Adding 2 parts to adjust condenser tip placement
1- acetal spacer
2- 007 x ring

The spacer goes behing the spinning mp
The 007 x ring goes behind the standard 008 x ring. The mp spins as normal, and the condenser is adjusted for the glass stem length. The stems will have a slight variance, one stem to another - Dave is going to provide a list of stem lengths so that I can get everything as close to spec as necessary.

As this is a modified version of the classic DV glass OG... I thought it important to provide a fix for this first batch. IMO, when RWW gets his glassmaker up to spec, this stem should become the inheritor to the standard DV OG
 
Last edited:

stark1

Lonesome Planet
The Omni condenser is adjustable, is it not.

In the worst case, the mouthpiece can be pulled out one O-ring at a time for airflow. Or the tip
Can be pulled out a bit.

Ideally, the stem can be cut of the proper length, eliminating the need for spavers, or the need
To get down on one’s knees looking for the little buggers.

Ah, Lord! Spare me the need of reading glasses! :cool::lol:;)
 
Last edited:

danielj

Accessory Maker
Accessory Maker
The Omni condenser is adjustable, is it not.

In the worst case, the mouthpiece can be pulled out one O-ring at a time for airflow. Or the tip
Can be pulled out a bit.

Ideally, the stem can be cut of the proper length, eliminating the need for spavers, or the need
To get down on one’s knees looking for the little buggers.

Ah, Lord! Spare me the need of reading glasses! :cool::lol:;)
@stark1

totally... for the omni condenser, just pull abit
For spinning mp, the spacer is best option
yes, hopfully the glassmaker has the tooling to blow, cut to length, and fire polish.

Hey, Im legally blind...its' all " little buggers" to me!
 

MasonJar

Well-Known Member
Ddavemods: Temporary Suspension of Business Activities

I checked ddavemods website after reading this news on reddit and indeed the home page displays the message above. I had plans of getting additional Water Wand V2s once they became available but now I guess I have to wait longer.
 

Verax

Well-Known Member
Ddavemods: Temporary Suspension of Business Activities

I checked ddavemods website after reading this news on reddit and indeed the home page displays the message above. I had plans of getting additional Water Wand V2s once they became available but now I guess I have to wait longer.

Yeah, I had an open order I had with him just get cancelled this AM.
 

Baron23

Well-Known Member
Ddavemods: Temporary Suspension of Business Activities

I checked ddavemods website after reading this news on reddit and indeed the home page displays the message above. I had plans of getting additional Water Wand V2s once they became available but now I guess I have to wait longer.
@DDave

I read the blurb on his home page then went to his blog page which has way more details.

What an ugly story and yes, IMO DHL sucks.

I'm sorry to hear this and hope Dave is able to return to business quickly.
 
Top Bottom