1. What does SSTB mean? See our glossary of acronyms.
    Dismiss Notice

Haze Dual V3

Discussion in 'Portable Vaporizers' started by mrweed, Mar 10, 2014.

  1. ichibaneye

    ichibaneye Vapriot, Traveler & Vaporizer/ing lover!

    Messages:
    788
    Location:
    The Honeycomb Hideout
    Here's a little something for my Haze-oh- naughts! I was enjoying OR. heavily this past weekend. :freak:

    The stealth black V3 in action, enjoy and like always cheers! :D:cheers:

     
  2. C No Ego

    C No Ego Well-Known Member

    Messages:
    1,079
    back form a beach trip taking the v3 with... great little can compartments! they made it easy to do on the go... did not stop me from getting sun burnt but helped ease the pain LOL
     
  3. C No Ego

    C No Ego Well-Known Member

    Messages:
    1,079
    having used the cans exclusively lately I've foregone cleaning teh haze since... time for cleaning no doubt...

    a little ( I got high as shit ) tale to tell... the last time I cleaned the v3 I used degummed hemp fiber wrapped around a wooden q-tip with the factory cotton tip broke off and replaced with the hemp fiber... it took quite a few times with multiple new swipes down the air shoot as each swipe was resin clogged.. afterwards I ended up with a few really dark resinous soaked hemp wads- where did they go? in my mouth to suck on! Holy moly! I was blasted for a long time trying to figure out wha happin??!! LOL

    be warned, if you try this next time you clean the v3 do not leave the couch lol

    I've read where you add this to warm milk etc which could lessen effects so maybe try that first LOL
     
    Chocu1a and Sketch420 like this.
  4. goobug

    goobug Member

    Messages:
    1
    Hello Folks,

    Just wondering if anybody has some insight into contacting Haze support? I've filled out a service request for a unit via the web site, waited a week with no response or contact, filled out a second request and it has now been 2 weeks with no response or contact. I've tried emailing the accounts listed on the website (support@hazevaporizers.com and cs@hazevaporizers.com) and am getting a "mail accounts not valid error".
    Thanks in advance.
     
  5. Haze Vaporizers

    Haze Vaporizers Well-Known Member Manufacturer

    Messages:
    113
    @goobug can you please PM me your name, phone number and email address. We will investigate why you are getting that error message.

    Thank you
     
  6. ontopofclouds

    ontopofclouds New Member

    Messages:
    2
    hey guys longtime lurker first-time poster

    so after doing a really good cleaning of my haze v3 in may I've kinda neglected it over the past month and half or so while still using it pretty much daily

    it's kinda hard to openly clean it living in my parents house for the summer, etc. and honestly I've just been lazy which is 100% my fault

    anyway I've been cleaning it over the past day or so and it's been a bitch, definitely regret not cleaning it more before this

    I've used a lot of iso and q-tips as well as toothpicks and I've done a pretty good job getting the chambers clean, but there's still burn marks and left-over residue (I think this is what you would call it?) in both of the chambers that I really want to get out but am struggling to do so with toothpicks

    are there any tips or pointers of things I could do to get the marks out? I want to get my haze as clean as possible and maintain it that way for the future (so definitely not gonna let it sit for a month+ again lol)

    any special tools I can use to help?

    I can post some pics later if it helps you guys understand what I'm dealing with

    Cheers!
     
  7. ginolicious

    ginolicious Well-Known Member

    Messages:
    811
    Try a magic eraser.

    But if they are actual burn marks and discoloration due to use, will be difficult to get it back perfect.
     
  8. JustDisGuy

    JustDisGuy New Member

    Messages:
    1
    If you do use one in your vaporizer, probably wise to do a couple of high heat burnoffs outside afterwards.
     
  9. ginolicious

    ginolicious Well-Known Member

    Messages:
    811
    Yes. Most definitely. I never use magic eraser. Burn marks are apart of use. Never going to stay prestine.
     
  10. Dynalowrider

    Dynalowrider Well-Known Member

    Messages:
    592
    Location:
    Deep in the heart
    I in no way condon doing this.
    Using distilled water clean qtip, upside-down, highest heat swab the bowl. I repeat, distilled water, highest heat setting, hold vape with oven facing down, carefully steam the bowl. Use a damp, (damp)qtip. Redampen as needed.
    Do not use tap water, (chlorine).
    This also works on Boundless Vapes. Doc
     
    woolspinner likes this.
  11. Bladesman

    Bladesman Member

    Messages:
    22
    Waste of time, its stainless steel so it will discolour, no effect on performance.
     
  12. C No Ego

    C No Ego Well-Known Member

    Messages:
    1,079
    looking at this thread helps me see when I cleaned the V3 last.... so it's been a little over a month and cleaned it again... this time I used a wooden q-tip and pulled the factory cotton off and put my own degummed hemp fiber on there instead... I just turned while holding the hemp on there until it stuck... then with the V3 hot I stuck the hemp fiber down there to soak up the resin... once saturated I just pulled the fiber off of the tip and replaced it with more... after a few of those saturated swipes ( maybe 4) I switched over to regular q-tips and iso alcohol to clean the rest... I'm saving the resin coated hemp to soak in a small bowl with iso alcohol that gets evaporated and then put coconut oil in the dish to soak up the resin to eat later...
     
  13. ichibaneye

    ichibaneye Vapriot, Traveler & Vaporizer/ing lover!

    Messages:
    788
    Location:
    The Honeycomb Hideout
    No no no... this is not good at all. The Haze is not meant to be fired up without some lovin in the ovens. I believe (If memory serves me correctly) that it's stated in the directions when you receive a unit and on the Haze site.
     
    woolspinner, Sketch420 and Bladesman like this.
  14. Shibaz

    Shibaz New Member

    Messages:
    5
    Location:
    Southwest
    Hi all--I'm new to posting on the site (been lurking awhile) and just got my Haze 3 today. It was a replacement for my little HipVap that broke. Had that about a year. And DAMN! While I know (from reading this forum!) that there may be better convection vapes out there, this one is so much superior to what I had that I realize I'm just beginning to understand the vaping world. This thing rocks: so much smoother, and definitely need less dry herb to get where I want to be! I'm impressed!

    (and...I'm sure you all know this is going to lead to the purchase of more vapes. What have I got myself into? *lol*)

    Thanks too, because I read a lot of this thread before I settled on the Haze 3. (Now to read the rest!)
     
  15. ichibaneye

    ichibaneye Vapriot, Traveler & Vaporizer/ing lover!

    Messages:
    788
    Location:
    The Honeycomb Hideout
    Welcome and you can do many things with the Haze my friend. I've actually found it to be superior to many other vaporizer in its class. Oh, and far less expensive to many of the others too. It's got a learning curve... but watch out once you've dialed in your grind, draw and loads. You'll be blasting off into Haze heaven in no time.

    You've also come to the right place it sounds like, because FC is all about the information and lifestyle. It's the only place to be. It will definitely induce the VAS shakes! But in this land of wonder, cravings are a good thing. Cheers! :cheers:
     
    Shibaz, Prolusio and Chocu1a like this.
  16. ginolicious

    ginolicious Well-Known Member

    Messages:
    811
    Does say you should not to burn offs. But I do one anyways after cleaning to ensure I get the ISO taste out.

    I noticed that if I don't do a burn off for the oil can I can really taste the dishsoap that seems to stick to the silicone lid. Anyone have suggestions for that?
     
  17. Dynalowrider

    Dynalowrider Well-Known Member

    Messages:
    592
    Location:
    Deep in the heart
    Rince in coconut milk. If you look back in this thread Haze has recommended to rince the silicone parts in coconut milk. Ask Scott. Doc
     
  18. C No Ego

    C No Ego Well-Known Member

    Messages:
    1,079
    after using the V3 for a good while I like the ed's TNT wooden pipe adapters ( wpa=water pipe adapter) that are made to fit the V3... I bought the 14mm sized wpa and the 18mm @PuffItUp .. the 14mm one is the one I keep on the vape at all times as it cools the vapor some when hitting native and fits my favorite 14mm fab egg bubbler... The tank- http://www.dhgate.com/product/2015-feb-newest-glass-bong-9-quot-inches/247499767.html

    After you have had the vape for a awhile let us know and we can help you keep it clean internally as most cannabis is sticky and can gunk up the best of vapes
     
    Shibaz and Sketch420 like this.
  19. ichibaneye

    ichibaneye Vapriot, Traveler & Vaporizer/ing lover!

    Messages:
    788
    Location:
    The Honeycomb Hideout
    For our newest HazeOhNaughts, nice to meet you. I mentioned a few posts back that the Haze is capable of so many things, in so many places and environments. It's utterly an on demand pocket multi-tool if the user plans things out ahead of time. This is one thing about the Haze, among many that keeps calling me to enjoy what it just does, Haze me. Even sweeter than Sally herself, :o the Haze can do a few things at the same time depending on your combinations and experimenting.

    Now let's enjoy our Flower and shatter sandwich shall we. Directions: Cover the can or screen bottom of your choice with a thin layer of flower. Next, add your concentrate of choice, I've chosen shatter of course. Finally, fill your choosen vessel up all the way. :tup: I call this a Canshatflowrich! Ouch right, I know It sounds horrible but trust me it tastes and treats you oh so nicely. Enjoy! ;)

    Fire up the little guy and... Now you're blasting off headed into the great experience known as Haze. Cheah buddies.... Cheers! :cheers:

    [​IMG]
     
    Shibaz and C No Ego like this.
  20. Formersmoker85

    Formersmoker85 The dude abides

    Messages:
    22
    Same here. I mailed them with a reply email on June 29. It was about a warranty issue that was almost resolved but by my own misstake i haven't mailed them back for quiete a while. Too bad no response.
     
  21. Haze Vaporizers

    Haze Vaporizers Well-Known Member Manufacturer

    Messages:
    113
    We currently do not have any emails that have not been responded to. If you think that your inquiry was not responded to, please PM me.

    Thanks
     
  22. ginolicious

    ginolicious Well-Known Member

    Messages:
    811
    What's the warranty issues you guys been having? Just curious. Rather hear the issue you been experiencing with the unit oppose to response from Haze.
     
  23. Skyscraper

    Skyscraper Well-Known Member

    Messages:
    238
    I received an all black Haze V3 today. Very happy with my purchase so far. After letting the batteries charge for 6-7 hours I fired the vape up with a conduction screen. I used pretty mid grade bud for my first sessions. Very impressed with the vapor production and effect. The Haze hits smooth but you can feel it in your throat and lungs.

    The Haze has come at a critical time for me, as I've been smoking a lot lately because my current lineup just wasn't cutting it for my needs. I've done 4 bowls in the Haze so far and have used a lot less herb and am way more medicated than from smoking or from vaping with the Focus Pro

    Edit: Forgot to say that I used the Haze with a somewhat better quality of bud before posting and was nicely vaked :)
     
  24. C No Ego

    C No Ego Well-Known Member

    Messages:
    1,079
    the best thing I've found for my haze is the Ed's tnt wooden wpa ( water pipe adapter)... I use it all the time now and have not used any other mouthpieces since getting it.. I got the 14 mm and the 18 mm for different sized bubblers
     
    Skyscraper and Haze Vaporizers like this.
  25. ginolicious

    ginolicious Well-Known Member

    Messages:
    811
    I gotta say I been on a shatter kick lately with my Haze. Skywalker OG to be exact. Love the veraailitily of this device. But doing shatter all the time surely makes the thing messy.
     
    C No Ego and Haze Vaporizers like this.

Support FC, visit our trusted friends and sponsors