1. What does SSTB mean? See our glossary of acronyms.
    Dismiss Notice

AVS Molecule RDA

Discussion in 'E-cig Based Portables' started by Kanna_Kult, Oct 6, 2018.

  1. graydeh1

    graydeh1 Double deckin'

    Messages:
    232
    Location:
    Toronto
    Glad you settled it @invertedisdead , mine will arrive any day and a package from sweetleaf to load it with. Let us know your settings as you progress.
    All di best.
     
    invertedisdead likes this.
  2. graydeh1

    graydeh1 Double deckin'

    Messages:
    232
    Location:
    Toronto
    I have an eleaf pico 25 with AF. Hoping it works well with my ss mole.
     
    invertedisdead likes this.
  3. abracadaver

    abracadaver aka mephisto

    Messages:
    14
    I have given up on temp control with the Mole for all of my mods except for the P80. Tesla, Wisemec, Vaporesso all pop out of TC and redline the watts, trashing the precious. 10 watts and its flavor country.
     
    invertedisdead likes this.
  4. invertedisdead

    invertedisdead trance-form

    Messages:
    3,940
    Location:
    Colliefornia
    I just can't get the damn cap off. Even oiling the O rings so far does nothing. I have to unscrew the housing, use a ram rod to pop the cap off since installing directly can crack the quartz bowl. I also find it pretty hard to load but I've only tried diamonds so far. It does taste pretty damn good so far, haven't been blown away by the vapor production.
     
    ataxian, graydeh1 and tennisguru1 like this.
  5. al bundy

    al bundy Vaporist

    Messages:
    910
    Location:
    S.I.N.Y.
    Heat it first
    I had a hard time also
    I rock it back and forth to take off
    I used very little chap stick
     
    tennisguru1 and invertedisdead like this.
  6. tennisguru1

    tennisguru1 Well-Known Member

    Messages:
    509
    I got that bubbler attachment in the mail, as soon as I get it will be
    last time I have to use that tiny mouthpiece.
    Going to use that base to mount my all glass mouthpiece & straw
    I use on Sai as the easy on & off to load & hit much easier.
    It should work also with the Mole's Quartz Cups which are now here.
    Should have the whole setup by weekend.
    Hope it hits near as great as the Sai's QC, fingers crossed.
     
    invertedisdead likes this.
  7. graydeh1

    graydeh1 Double deckin'

    Messages:
    232
    Location:
    Toronto
    Mines out for delivery :)

    Should I strum the pre-installed coil in wattage ( if so how many watts to run at?)

    Any other advice aside from the owners videos?

    Thanks community.

    Update: delivered, cant wait to get home.
     
    invertedisdead and tennisguru1 like this.
  8. invertedisdead

    invertedisdead trance-form

    Messages:
    3,940
    Location:
    Colliefornia
    I would check the resistance first and see if you can strum in TC like the AVS video. If not go for wattage mode, I think 15w is a safe starting point.

    My mods are all set up in Arctic Fox to Re-Read the resistance by pressing in the -+ buttons at the same time, nice little feature instead of unscrewing the atomizer.

    Don't be surprised if your cap is TIGHT as heck for a bit. Mine is just now starting to loosen up. The advice from @al bundy about wiggling it gently worked perfect. I was skeptical to try that at first just due to the quartz fractures people were getting screwing the housing + mouthpiece on at the same time, but I don't think mine would have ever started fitting without that little wiggle. I "twist" the mouthpiece when installing it to the housing.

    I'm hitting mine at 30w lately in SS316L 380-410F, trying to decide if I get more reclaim at lower or higher watts. At lower watts there's drip through, at higher power there's splatter, so I'm trying to find the happy medium.

    It actually tastes a lot better than I expected, the flavor is pretty impressive on it, IMO not completely on par with an all glass vapor path hit, but 360F-390F has some pretty legit flavors.
     
    Hogni and graydeh1 like this.
  9. graydeh1

    graydeh1 Double deckin'

    Messages:
    232
    Location:
    Toronto
    Thanks @invertedisdead , after your mods having weird resistances youve mastered the mole.

    I will post my ease ( or not) at getting going.
     
    invertedisdead likes this.
  10. al bundy

    al bundy Vaporist

    Messages:
    910
    Location:
    S.I.N.Y.
    Just push the mouth piece on
    Very little chap stick like stuff works great
    Only did it once
    As long as the cap is snug down I don’t see a way to crack the glass because the cap don’t move
    Also definitely use the tool to tighten to Mole to mod
     
  11. graydeh1

    graydeh1 Double deckin'

    Messages:
    232
    Location:
    Toronto
    my resistance is .34 I've gone 25 watts up to 430 Fahrenheit, No vapor at all it's just making the stuff bubble a teeny bit.

    I should be locking my resistance correct?
    it's locked at .34 after some strumming of the installed coil is that anywhere in the ballpark?
     
  12. subway13029

    subway13029 Well-Known Member

    Messages:
    1,804
    Location:
    Duval
    Yeah def lock the resistance once you get it settled in..and I was having great results and I was unscrewing the housing every time I loaded it up and then when I realized that the top cap actually seal inside the lip of the quartz cup that I started actually pulling the cap off to load and the results got better and my readings stayed more consistent..

    I’d say to get your resistance higher than .34...when my resistance wasn’t right I would leave cap off and my wax would boil away with no vapor.
     
    invertedisdead and graydeh1 like this.
  13. graydeh1

    graydeh1 Double deckin'

    Messages:
    232
    Location:
    Toronto
    Strum for higher resistance?
    also if I hold the molecule it feels like the quartz or the pre-installed coil is a little shaky, it rattles the smallest bit, maybe I should reinstall it?
     
  14. graydeh1

    graydeh1 Double deckin'

    Messages:
    232
    Location:
    Toronto
    Okay weird I just let it sit for a bit it came up at .39, locked it and got an amazing rip :)


    Edit
    It may have been a bit cold from being in the mailbox.

    It's working great right now!
     
    Last edited: Nov 8, 2018
    invertedisdead likes this.
  15. subway13029

    subway13029 Well-Known Member

    Messages:
    1,804
    Location:
    Duval
    When I went camping last weekend and went to walk and take some rips..it was too cold and wouldn’t hit right..lol

    And yeah if my resistance is off sometimes my coil will be loose..but was from unscrewing housing..
     
    graydeh1 likes this.
  16. tennisguru1

    tennisguru1 Well-Known Member

    Messages:
    509
    Hey buddy just picked this up from Mole creator

    From the creator

    VapeMore4LessAVS Molecule Creator • 18m

    I'm ordering a jet stream too haha... I saw that post with dual molecule coils and now I need one! That would be perfect to hook to my rig, or just one giant hex core coil in the jet stream, not sure if it will fit but I'll try it and share. Weve been hit with so many delays on the quartz. On that note though, what I've done is created a SS crucible that drops into the quartz bucket and is ultra thin, instant heat and low heat retention. The outer quartz is to help act as a heat refractory. Then you can dab right out of the 316lss bucket or drop the revised quartz bucket we're making into that instead of trying to place it perfect on the coil. The main issue I'm having with our quartz is boil over and so I'm making it taller. Quartz is a new thing for us and I jumped the gun on that and am paying the price for it. I got caught up in the excitement of the molecule with everyone and just wanted to make everything people wanted. I've taken a step back and am properly testing everything as I did with the molecule. I'm currently testing the AFC and it's amazing. I'll let people order it soon but not until I 100% know when I'll ship them. We definitely experienced some growing pains but I'll have business running normal very soon and everything in stock, probably won't do a preorder ever again haha
     
    Hogni and invertedisdead like this.
  17. tennisguru1

    tennisguru1 Well-Known Member

    Messages:
    509

    The Mole bubblier

    Gallery
     
    graydeh1 and invertedisdead like this.
  18. szai

    szai Well-Known Member

    Messages:
    838
    Location:
    Florida
    Is anyone aware of a high quality but tiny box mod for the molecule? I'm using it in wattage mode after having some issues with my joyetech evic dual. I'm enjoying the hell out of it just running it between 13-15 watts and pulsing hits. The first hit is between 5-8 secs then after around dry hitting for three secs pulse and additional 2-3 secs and continue doing in until you're done!

    https://www.instagram.com/p/Bp8Y2yMjyqd/?utm_source=ig_share_sheet&igshid=x40gpwprwovk
     
    Last edited: Nov 9, 2018
  19. tennisguru1

    tennisguru1 Well-Known Member

    Messages:
    509
    So I assume you are using AF and not stock firmware, ok?

    I just popped my Mole on Dual Evic , running AF TCR#92 @19watts
    temp 39- 420 resistance locked a .386 works great full 15 second pull
    smooth, no burning, original coil 5 grams thru.
    I have never unscrewed it, always pull off top to load.
    Installed on low profile black heat sync, TIGHT, lol.
    Moved to 4 diff mods.
    Best was Espion 200 Dual Red Panda (color AF) overkill but nice.
    Might be really good for bubblier balance.
    Evic Two Mini - AF very good fit TC great
    Evic Dual & Lavabox m DNA 75
    Istick pico gifted to friend he likes it also running AF
     
    Hogni and invertedisdead like this.
  20. szai

    szai Well-Known Member

    Messages:
    838
    Location:
    Florida
    Thanks for the suggestion I did that and it worked! Wow this thing is fantastic in TC ma!

    Does anyone have a source for some narrow heatsinks?
     
    tennisguru1 likes this.
  21. tennisguru1

    tennisguru1 Well-Known Member

    Messages:
    509
    You're very welcome :>)
    Smallest I found was on FT and they were 18mm out of stock
    if you find smaller, let us know ty
     
  22. graydeh1

    graydeh1 Double deckin'

    Messages:
    232
    Location:
    Toronto
    What about using nice thick distillate in this bad boy. It says in the box that can do "all" concentrates.
     
    invertedisdead likes this.
  23. invertedisdead

    invertedisdead trance-form

    Messages:
    3,940
    Location:
    Colliefornia
    It would work fine, although I prefer to use oils like distillate or co2 in a ccell cartridge for no reloading.
     
  24. tennisguru1

    tennisguru1 Well-Known Member

    Messages:
    509
    https://www.fasttech.com/products/3032/10016897/7609900-authentic-ehpro-mod-101-50w-tc-vw-mod
     
  25. tennisguru1

    tennisguru1 Well-Known Member

    Messages:
    509

    The Mole Bubblier Adapter + Sai QC cup Motar + Whip for filming
    I tried using the old mole cups but their too short & spilled over.
    New ones are higher ones are shipping out soon.
    Just starting playing, but it looks good.
    With just .01 shatter & I couldn't finish it.
    Don't have a clue how to dial in TC, but just
    pulsing in wattage not a bad start.

    Click to play YouTube Video
     

Support FC, visit our trusted friends and sponsors