Discontinued The Grasshopper
- Thread starter midgetsanchez
- Start date
OF
Well-Known Member
I seriously doubt it, there's just not enough mass of hot to support the hit. GH depends on dynamically replacing the heat as it's drawn off......It has to be on to do that.
OF
syrupy
Authorized Buyer
Fractional release, hahaha.
Sounds like a vape fart. Not enough to do anything but people nearby still notice.
zymos
Well-Known Member
Put it in a paper bag like a bottle of booze...
Or an asthma attack, haha.
1_gr8_underdog
Trapped in the Astral Planes Back from the dead
The eyes are amazing in there complexity. Given a flat empty space they can detect a single candle flame at a distance of 30 miles.
Sorry for the ot, back on track. I am curious to see in the upcoming month if they are able to pinpoint the issues and get them rectfied in a timely manner. Here's hoping.
Sorry for the ot, back on track. I am curious to see in the upcoming month if they are able to pinpoint the issues and get them rectfied in a timely manner. Here's hoping.
Last edited:
OF
Well-Known Member
Here's my suggestion for a starting point on baffles for the intake.
Cut a strip of 'cardboard box' say 1.5 inches by two. You want the corrugated fiberboard type, with the solid covers over a corrugated center. Then strip off one face so you have the corrugated part on one side, facing on the other.
Spray paint the corrugated part flat black. "Coloring it in" with a Sharpie would also work, but flat black paint will generally be a better light absorber. When dry, wrap it around the unit over the vents and secure with a rubber band. Air will enter the gaps in the corrugation and easily make the right angle turn into the vents, photons (light) coming out will not be able to turn so will reflect around until absorbed.
OF
Cut a strip of 'cardboard box' say 1.5 inches by two. You want the corrugated fiberboard type, with the solid covers over a corrugated center. Then strip off one face so you have the corrugated part on one side, facing on the other.
Spray paint the corrugated part flat black. "Coloring it in" with a Sharpie would also work, but flat black paint will generally be a better light absorber. When dry, wrap it around the unit over the vents and secure with a rubber band. Air will enter the gaps in the corrugation and easily make the right angle turn into the vents, photons (light) coming out will not be able to turn so will reflect around until absorbed.
OF
wellington
New Member
That's the beauty of vaping tho innit? As long as you keep it low temp and ghost properly it doesn't smell like weed at all, just faintly like burnt popcorn. Perfect for the movies.
Please stick to discussing the GH and not the thread. If you don't like something, either ignore it or report it.
To clarify, Resources have only been added recently. There is an extensive introduction by @vtac in his Community Discussions thread A Community Resource System For Reviews and Articles.
To clarify, Resources have only been added recently. There is an extensive introduction by @vtac in his Community Discussions thread A Community Resource System For Reviews and Articles.
Vapor Loop
Well-Known Member
I really get instant one's specifically to pull out anywhere and take a quick draw. The Grasshopper sadly clashes with that just another juice tincture vape story since it looks like a nice pen.
Sorry for raising this up again. I really don't want to fuel any speculation, and I'm more interested in hearing from actual GH owners than people just speculating. Anyway I'll join in since I got curious and couldn't help digging around: A google search for "Bird Aerospace LLC" (with the quotes) only gives 3 pages of results.
![:\](/i/s/hmm.gif "Hmm :\")
The most interesting find is this:http://videos.cache.magnify.net/5TWX0W366WW6G1VK-Bird_Aerospace_108_780_576x0.mp4 So I'm not very convinced about Bird Aerospace.
However, I must say that I'm mostly confident in the efforts of Hopper Labs, since they do have a great product that works (most of the time). They just need to get all the bugs sorted ASAP. I'm sure (and hope) that now they're extra careful about the assembly and the units that they ship. I'll happily continue my t-break until my 3 hoppers arrive (hopefully this year).
ragnorokk
DERP
Wow, that's a long haul t-break if you don't know when they're coming. More power to you.Sorry for raising this up again. I really don't want to fuel any speculation, and I'm more interested in hearing from actual GH owners than people just speculating. Anyway I'll join in since I got curious and couldn't help digging around: A google search for "Bird Aerospace LLC" (with the quotes) only gives 3 pages of results.
http://videos.cache.magnify.net/5TWX0W366WW6G1VK-Bird_Aerospace_108_780_576x0.mp4 So I'm not very convinced about Bird Aerospace.
However, I must say that I'm mostly confident in the efforts of Hopper Labs, since they do have a great product that works (most of the time). They just need to get all the bugs sorted ASAP. I'm sure (and hope) that now they're extra careful about the assembly and the units that they ship. I'll happily continue my t-break until my 3 hoppers arrive (hopefully this year).
And more flowers for me! Muwahahahhaa
I have just moved a bunch of posts about vaping in movie theaters into a new thread. Let's please keep this thread on topic.
thank you so much. i cant believe how off topic this thread gets sometimesI have just moved a bunch of posts about vaping in movie theaters into a new thread. Let's please keep this thread on topic.
fonzerelli
Well-Known Member
All things considered, as far as off topic topics go, this one was at least a wee bit relevant, since it was about how to use this specific vape in a ridiculous situation in such a way as to not get arrested!
FluffMolotov
Well-Known Member
The lights are a bit bright for me, I'll bet. Think a band of some sort will suffice to dim them. Maybe a stainless mesh (wedding?) ring?
Krazzykid
Well-Known Member
The led is located down inside the air holes. I seriously doubt someone is going to be able to get a sharpie or anything like that in there(and getting all surfaces of the diode as well), let alone being able to wipe it off with ISO later on.
It's a nice idea and all, I just don't see it working unless you have the ability to disassemble and reassemble the unit.
I personally don't see the light as a big deal at all. Tell people it was an ecig if they see the light.
Then there's always the smart advice of just not using your Hopper in situations where unwanted people will see you using it.
Edit
You might be able to get a fine point sharpie into the hole. I still don't think you would be able to cover enough of the led with it to make much of a difference though.
Light coming from the surfaces you were unable to reach would still be visible.
Last edited:
