• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Cheap High Quality Bubbler

Caligula

Maximus
that looks like cracking to me...

I can see how it looks like there is a layer of something peeling off.

nD9t8mM.jpg
 

Goldorak

Member
I would also like to avoid anything made in China, because FUCK CHINA!! :ko:

China is amazing in many ways, I lived there more than 6 years and I go back there often. Like in any country you have all kind of suppliers, from the sh** factory that still works like in XIX century to the super highly developed like in Germany.
Sometimes the price should ring a bell: too low there is something fishy... Problem is most of western countries have a very old image of China when in fact the country has been booming for 15 years.

I was looking myself for cheap bubbler no later than yesterday and check the reply I got on the LSV thread:
http://fuckcombustion.com/threads/7th-floor-life-saber-lsv.2641/page-187

I am going to China again soon and will grab some, I will let you know about the quality of the workmanship.
 

PoopMachine

Well-Known Member
China is amazing in many ways, I lived there more than 6 years and I go back there often. Like in any country you have all kind of suppliers, from the sh** factory that still works like in XIX century to the super highly developed like in Germany.
Sometimes the price should ring a bell: too low there is something fishy... Problem is most of western countries have a very old image of China when in fact the country has been booming for 15 years.

I was looking myself for cheap bubbler no later than yesterday and check the reply I got on the LSV thread:
http://fuckcombustion.com/threads/7th-floor-life-saber-lsv.2641/page-187

I am going to China again soon and will grab some, I will let you know about the quality of the workmanship.

Erm.. lots of people have that piece in this thread. In fact, this is where most of those finds originate. I havent bought a ton of stuff from over there and I gave away everything but my D020 but my Fake-RooR is enroute so maybe it will be a keeper.

Be really interesting to see what you find on your next visit tho....
 

Tweak

T\/\/34|<
That's what I mean.... sidecar is on the right, putting can on the left. If holding the bubbler while using it, you'd have to reach across the mouthpiece with your right hand to lift a vape to clear it. Seems "left-handed" to me. This is the opposite of the jhanpixel sidecar I have, and all other sidecar bubblers I've seen (in person or in pictures).

Seemed a lil' funny to me too. Thought the sidecar should be on the left. Gave me no issue but I'm using the e-nano which isn't very heavy.

kimxa5ml.jpg


@kushcabbage how does the TD-321 compare to the WP-010? Looks like the MP size is noticeable different.
 

MySega

Well-Known Member
I sadly broke the downstem thing on my d022 today. Does anyone know where I can get a replacement/what size it is? It is bigger than an 18 but I can't figure it out.

d022-double-chamber-glass-water-pipe.jpg
 

jambandphan03

in flavor country
I sadly broke the downstem thing on my d022 today. Does anyone know where I can get a replacement/what size it is? It is bigger than an 18 but I can't figure it out.

d022-double-chamber-glass-water-pipe.jpg
that sux, I was thinking I should have ordered a spare stem along with the D022, but didn't end up doing that. Might be worth dropping them an email asking about what it cost to replace it, or at least get sizes, if they are not shown on the listing.
 

DieHard

Accessory supplier
Accessory Maker
I sadly broke the downstem thing on my d022 today. Does anyone know where I can get a replacement/what size it is? It is bigger than an 18 but I can't figure it out.

d022-double-chamber-glass-water-pipe.jpg
If all else fails you can contact http://www.ioffer.com/selling/oregonglassblower
Mike will make a custom stem to fit for a reasonable price to your specs. Be sure to mention FC discount.
He will tell you how to measure for perfect fit.
 

Quetzalcoatl

DEADY GUERRERO/DIRT COBAIN/GEORGE KUSH
I sadly broke the downstem thing on my d022 today. Does anyone know where I can get a replacement/what size it is? It is bigger than an 18 but I can't figure it out.

d022-double-chamber-glass-water-pipe.jpg
Looks like it's gonna be either a 24mm or a 29mm, my donuts would be betting on the 24mm since 29 should look bigger... those are the common joint sizes anyways. Don't hold me to that one though ;)
 
Last edited:
Quetzalcoatl,
  • Like
Reactions: SSVUN~YAH

ataxian

PALE BLUE DOT
Looks like it's gonna be either a 24mm or a 29mm, my donuts would be betting on the 24mm since 29 should look bigger... those are the common joint sizes anyways. Don't hold me to that one though ;)

I should have bought 3 of these!
The whole piece is cheaper than the 24mm fitting!
I sadly broke the downstem thing on my d022 today. Does anyone know where I can get a replacement/what size it is? It is bigger than an 18 but I can't figure it out.

Why not saw off the down stem with a diamond blade?
Add a ASH COLLECTOR as a diffuser?

Or throw a few diffusing stones and submerge with water?
Have ghgate send you just the down stem?

No problems only solutions!
 
Last edited:

SSVUN~YAH

You Must Unlearn, What You Have Learned...
^ Why does the mouthpiece have to be that way :uhoh: LOL



Might be cheaper to buy another d022. Maybe sunshine can hook you up with just the downstem at reduced cost?
It is definetly not as phallic as I believe you maybe thinking. It does have a cobra look to it and I get it if it looks like a snake how is it not phallic. It isn't rounded like Ms. Kathy original hc bub, it has a flattened mouthpiece similar to the lazy day inline without the hole. For what it's worth none of my friends have mentioned anything and trust me they would...
 

cybrguy

Putin is a War Criminal
Gotta say that IS pretty cool. Maybe a little less water so there is a bit more room for vapor. Does it take a lot of suction force?

And BTW, I have been meaning to post that since getting that elbow joint and throwing 18" of silicone between my HA and my D020, I am enjoying the D020 a great deal more. It feels great in my hand and not having the HA right in my face makes it much more comfortable to use. I would rather not have had to add the silicone to the path, but short of getting a bigger piece this is a great solution for me. :)
 
Last edited:

vaplen

Well-Known Member
So shipping didn't work in my favor. Do you guys think they will just toss out my package? I don't think legally they can open my mail. Just placed another D020 order :p
 
vaplen,
  • Like
Reactions: ataxian
Top Bottom