Discontinued Thermovape Cera

Soflo

Only birdshit and fools
Anyone happen to know what the max temp of the exterior of the core would be? Maybe a better question would be, would it get hotter than 370F on the outside?

I potentially have access to some high-temperature thermoplastics used for 3D printing purposes but I wasn't sure this was actually suitable for holding a Cera core.

I highly doubt the body will get anywhere near that temp, I would guess less than 150°
 

OF

Well-Known Member
I have measured it well above 150F. Definitely above 200F using an LL cart.

Yup, me too. I recall something over 180 at five minutes or so without any covers. Anything over it will increase the temperature further of course.

With 1200 plus degrees F going on in the LL heater, any temperature less than that is at least possible?

OF
 

Soflo

Only birdshit and fools
Yup, me too. I recall something over 180 at five minutes or so without any covers. Anything over it will increase the temperature further of course.

With 1200 plus degrees F going on in the LL heater, any temperature less than that is at least possible?

OF
I was thinking about the EO, my bad guys
 
Soflo,

coffinoff

Well-Known Member
Thanks for the quick feedback, guys. Sounds like I could be in the right ballpark at least.

Finding time between work and class to design and prototype is probably going to be the real challenge anyway.
 
coffinoff,
  • Like
Reactions: Soflo
Anyone have the link to the Amazon double insulin carrier? It was the one that could fit two insulin pens I believe. (Want to put my XP+Cera in both) It strapped onto your waist and did not need a belt I believe. Tried searching but couldn't find it. Any help? Thanks.
 
Highnstein,
  • Like
Reactions: steama

Mynameismud

Accessory Maker
Accessory Maker
Mae West once famously said "you pays your money, and makes your choice". She had it backwards.

While the announcement of the mini Cera might be any time now, adapters I think are realistically months away. Lots of good vaping available between then and now?

Or would that be 'now and then'?

OF

Thanks for the update. Its been hard to not buy a cera but i keep telling myself if I do the announcement or adapters will pop up shortly afterwards.
 
Mynameismud,
  • Like
Reactions: OF

OF

Well-Known Member
Thanks for the update. Its been hard to not buy a cera but i keep telling myself if I do the announcement or adapters will pop up shortly afterwards.

Hey, not an update, just a guess. I'm not sure how good even, somewhere between educated and wild ass guess? I like to think closer to the former, but I suspect more would agree with the latter.

Time will tell. IMO it will be worth the wait from some angles no matter?

OF
 
OF,

Mynameismud

Accessory Maker
Accessory Maker
Hey, not an update, just a guess. I'm not sure how good even, somewhere between educated and wild ass guess? I like to think closer to the former, but I suspect more would agree with the latter.

Time will tell. IMO it will be worth the wait from some angles no matter?

OF
Well thanks for the guess then. Its better then nothing. Im positive itll be worth the wait, its just the waiting is so hard. Im sure ill end up cracking before ( almost have on a couple occasions already)
 
Mynameismud,
  • Like
Reactions: OF

Dreamerr

Always in a state of confusion and silliness♀
Well thanks for the guess then. Its better then nothing. Im positive itll be worth the wait, its just the waiting is so hard. Im sure ill end up cracking before ( almost have on a couple occasions already)

search for tet posts cause I did think they said cera mini sooner then later, summer maybe?, and then months for the adapter or as they said then we will start to do it after the mini is out. I think OF is on the money but a search will tell. Or I made this all up in my head either way I tried.
 

Mynameismud

Accessory Maker
Accessory Maker
search for tet posts cause I did think they said cera mini sooner then later, summer maybe?, and then months for the adapter or as they said then we will start to do it after the mini is out. I think OF is on the money but a search will tell. Or I made this all up in my head either way I tried.

"We have designed the Cera mini, however we need to make sure that a Japanese 14650 or 14500 will deliver consistent performance. That is what to expect next Christmas."

From original cera thread december 2012. Dont know if things have changed since then though...
 

Dreamerr

Always in a state of confusion and silliness♀
Well I lie lol. I think Tim had posted about it a week or so ago again. He might have said x-mas again as well.
 
Dreamerr,

NoName

Well-Known Member
I haven't been on this thread since I received my CERA EO couple of months ago. And yes I refuse to do catch up reading at the moment lol. Can some one who has both the LL&EO cart convince/inform me about investing in the LL cart.
 
mflb_hustler,

Mynameismud

Accessory Maker
Accessory Maker
Ah I knew someone would find it and help me out. My mind is not totally mud yet.
If that was an insult then Booo
Anyway I cant wait, I was willing to hold out till december(if i could) so 3 months is nothing. I wish the 510 adapters were a priority though, seems like a much easier and quicker task, or even something they could do while they finish the mini and LQ
 
Mynameismud,

Dreamerr

Always in a state of confusion and silliness♀
If that was an insult then Booo
Anyway I cant wait, I was willing to hold out till december(if i could) so 3 months is nothing. I wish the 510 adapters were a priority though, seems like a much easier and quicker task, or even something they could do while they finish the mini and LQ

Silly boy, I would never ever ever insult you. I just suck at searches and I thought I remembered right and I did so you got the info you wanted and so did others that had asked. Now don't worry be happy...oops I didn't mean to stick that song in your head:rofl::lol::p
 
Dreamerr,
  • Like
Reactions: OF

nopartofme

Over the falls, in a barrel
I haven't been on this thread since I received my CERA EO couple of months ago. And yes I refuse to do catch up reading at the moment lol. Can some one who has both the LL&EO cart convince/inform me about investing in the LL cart.
Try searching the thread for posts by darkrom or myself. DR talked about putting his Cloud away, and I'm a rare LL-only Cera owner. I love the thing. That's just off the top of my head; there have been lots of other positive impressions.

I see you have a T1 also. If you like the T1 at all, you will love the LL cart for sure.
 
nopartofme,
  • Like
Reactions: OF

tavosvo

Active Member
I haven't been on this thread since I received my CERA EO couple of months ago. And yes I refuse to do catch up reading at the moment lol. Can some one who has both the LL&EO cart convince/inform me about investing in the LL cart.


Do it brother! I got EO first as I was only concerned with vaping oil. But after reading some reviews and learning about the Cloud, I realized I wanna vape flowers too. Like nopartofme mentioned, he and darkrom have posted about how much they love it. So I figured a LL cart is $99 opposed to $600 cloud.

It works great. A little technique required, but easy to master. It does get hot. But with that ceramic MP that Nothingtoseehere designed, it looks like great vaping just got better.

If you happened to see joekickass's video where he was hitting his spyglass EO, he was using a VaporBlunt pinnacle water tool. It's freaking awesome. With the GonG adapter and the pinnacle, the LL is awesome!! Really smooth cool vapor. Water conditioned is much nicer on my throat.

I love just puffing away at my cera while watching tv at home with my lady, but tokin oil all night is expensive so the LL is a $$ saver for me.
 

BLAZING OG

Vaping is a way of life!
I highly doubt the body will get anywhere near that temp, I would guess less than 150°
I highly doubt the body will get anywhere near that temp, I would guess less than 150°
I have tested my EO core (outside) after a 20 minutes session of off and on with no longer than a minute in between ='s 144 degrees with a my cheap coast infrared digital thermometer
 
BLAZING OG,
  • Like
Reactions: coffinoff

BLAZING OG

Vaping is a way of life!
Also for cera hot mouth piece issues, these slip on easy, are disposable, wont burn your lips & are cheap!!!!

http://www.apolloecigs.com/product-p/atestercondom.htm
QIuMtbX.jpg


XQW7KFx.jpg


I use these to protect my lips fom a hot cera, but also work great as a hygienic type party mouthpiece!!!!
they slip on over cera ufo mouthpiece and 510 drip tip style aslo works great!!!
 
Top Bottom