Discontinued VapeXhale Cloud

greystr0ke

Well-Known Member
And more on the subject of water filtration...

Would a piece like this have too much volume for the VXC? (It's two feet tall.)

Roor_3_Chamber_Beaker_WP_8__80280_zoom.JPG


Obviously it would make the thicker, higher-temp stuff palatable even for the newbie, but what negative side effects would it have?

I hooked the Cloud up to my double perc Roor the other night and it was ok. I'd prefer the HydraTube over the two by far. I'll need to try it again though as I was already extremely baked when I tried it. Pic is posted a few pages back.

http://fuckcombustion.com/threads/vapexhale-cloud-launched.5247/page-13#post-199224
 
greystr0ke,

LiquidDreams

VapeHead
I don't have a lot of experience with glass, but the double-chamber I tried seemed to have a lot more drag.


If you get a double chamber made by a good brand/artist, a double chamber will not add much drag.

I have a strong feeling that the VXC is going to turn a lot of people into glassheads... be forewarned, it's a very strong addiction!:cool::cool:
 

Bluntcrush

Director of Vapor Research Labs™
If you get a double chamber made by a good brand/artist, a double chamber will not add much drag.

I have a strong feeling that the VXC is going to turn a lot of people into glassheads... be forewarned, it's a very strong addiction!:cool::cool:
Ain't that the truth!! :uhoh:

@:oBG- Yes the glass joint gets hot, but does not really "heat" the water in the HT.
@SM- Which size re-usable ice cube did you get that is small enough to fit (didn't mean to rhyme, but I was almost out of time) :rofl:
 
Bluntcrush,

oldiebutgoodie

Apostle, Church of Vaporization
Ain't that the truth!! :uhoh:
@:oBG- Yes the glass joint gets hot, but does not really "heat" the water in the HT.

Thanks for that clarification. And that does make sense; the heat transfer to the joint will be primarily with the draw, the HT won't be sitting atop the joint for a lengthy time, and the glass is thick. I don't mean to over-work this - but fantasizing about how the Cloud can be used is all we poor bastards who have to wait, can do. :)

@SM- Which size re-usable ice cube did you get that is small enough to fit

Those cubes in SM's link may not fit after all. They are all 1 1/8". From the previous HT pic with the two-bit piece atop, it appears the ID of the HT was a tad smaller and that coin is exactly 1". For that matter, the old-fashioned style ice-tray cubes look like they might be too large, too.
 
oldiebutgoodie,
  • Like
Reactions: Bluntcrush

Mr. Smoke No More

Can't stop the head rush!
Vxl just wondering if we can get an update on when the sgw package will start to ship. I didn't think they would take that long to pack up, or maybe are we waiting for more to be produced?
 

Bluntcrush

Director of Vapor Research Labs™
VXC Stoney Tip #1:
Always remove the cap of the ELB before you start stuffing ground up bud in. It makes you look kind of silly when you are demonstrating it to your friends!! :rofl:
 
Bluntcrush,

greystr0ke

Well-Known Member
VXC Stoney Tip #1:
Always remove the cap of the ELB before you start stuffing ground up bud in. It makes you look kind of silly when you are demonstrating it to your friends!! :rofl:

Lol. The other day I was so medicated from the first session I had that when I went to start my second session I forogt to put the EZ Load Bowl in again and kept wondering why I wasn't getting any vapor. :lol:
 

Seek

Apprentice Daydreamer
With the VXC this can be the only reason why you are not getting vapor. Or the unit can be off.
 
Seek,

ShadowLink12

Activist
Anyone else finding they have a new unhealthy obsession with checking their email? I was just looking at my old preorder email, and it mentioned the CloudStation, is this something VapeXhale is looking to produce once they get past these initial struggles? I am looking forward to "the machine" to sort of take over the Cloud production and distribution so the vapexhale crew can focus on Research and Development again!
 
ShadowLink12,

Stonebreaker6

Vulgar display of insouciance
^^^ I have limited myself to checking email (and this discussion thread) to no more than 2x day. Otherwise I go batshit crazy. :lol:

:peace:
 
Stonebreaker6,

Seek

Apprentice Daydreamer
If someone unscrew the VXC and post images of it I'll LIKE it. :D
 
Seek,

jackstraw62

Low temp deadhead vaporist
VXC Stoney Tip #1:
Always remove the cap of the ELB before you start stuffing ground up bud in. It makes you look kind of silly when you are demonstrating it to your friends!! :rofl:
been there done that also you have to remember to put the elb in the unit before you hit it. i like fresh cold water in my ht not much into ice cubes. I have not used hot water since I stopped combusting . My stemless is 18" and i get nice vapor at 9 o'clock. I do love this vape. :clap:
 

B.

War Criminal
^^^

I've forgotten to put the crucible in my HA more than once, more often than not totally sober :p
 

Ville23

Well-Known Member
been there done that also you have to remember to put the elb in the unit before you hit it. i like fresh cold water in my ht not much into ice cubes. I have not used hot water since I stopped combusting . My stemless is 18" and i get nice vapor at 9 o'clock. I do love this vape. :clap:
Lol. The other day I was so medicated from the first session I had that when I went to start my second session I forogt to put the EZ Load Bowl in again and kept wondering why I wasn't getting any vapor. :lol:
Great stuff guys! :lol:
Reminds me of this great video by Pappy!
 

jimbo

winterize
Sent an email to the vapexhale guys about the the showerdomes ( was thinking of switching if they were ready for shipping) guess the wait is still another week or two... so I decided to stick with the vertigo ( my original pick), also the shopping cart is finally working for canadians! Just paid, order # 208 :brow:
 

He-Man

Prince
208 :suspicious: where the hell am I on that list, didn't order that late as I recall

Guys, you who already got Cloud or paid lately could please add at least
some approximate date of your order.

ty
 
He-Man,

stonemonkey55

Chief Vapor Officer
Manufacturer
Vxl just wondering if we can get an update on when the sgw package will start to ship. I didn't think they would take that long to pack up, or maybe are we waiting for more to be produced?

We're gearing up the Showerdomes very shortly :) Just want to make sure the quality and everything is looking right before releasing them.
 
stonemonkey55,

jimbo

winterize
208 :suspicious: where the hell am I on that list, didn't order that late as I recall

Guys, you who already got Cloud or paid lately could please add at least
some approximate date of your order.

ty

Pre-ordered Aug,1 2010... Would've paid a week ago but there was a issue with the shopping cart...
 
jimbo,

moodswing

low tolerance is underrated
Pre-ordered Aug,1 2010... Would've paid a week ago but there was a issue with the shopping cart...

correct me if i'm wrong... i think the 08/01/10 date was actually when vxl first sent out confirmation emails. for example, peeps that ordered on the first day, 06/11/10, did not get a confirmation email til 8/1. so i think you might have actually pre-ordered before aug 1.
 
moodswing,

BL4ZE

Well-Known Member
208 :suspicious: where the hell am I on that list, didn't order that late as I recall

Guys, you who already got Cloud or paid lately could please add at least
some approximate date of your order.

ty


I'm not sure if there's a direct correlation between the order number and the actual amount that have been shipped. I was #189 and that was back on 2/29. So it's either that or there's a lot of FC lurkers out there who have a cloud in their hands but aren't active on the forums.
 
BL4ZE,

moodswing

low tolerance is underrated
I'm not sure if there's a direct correlation between the order number and the actual amount that have been shipped. I was #189 and that was back on 2/29. So it's either that or there's a lot of FC lurkers out there who have a cloud in their hands but aren't active on the forums.

i think the SN may actually have more correlation to the amount that has been shipped than the order#.
 
moodswing,
  • Like
Reactions: BL4ZE

jimbo

winterize
correct me if i'm wrong... i think the 08/01/10 date was actually when vxl first sent out confirmation emails. for example, peeps that ordered on the first day, 06/11/10, did not get a confirmation email til 8/1. so i think you might have actually pre-ordered before aug 1.

Yup, you're right, had to go through the the old vxc thread to find out when I pre-ordered, it was July 12, 2010...
 
Top Bottom