Dynavap VapCap

GreenHopper · May 6, 2017

needalift said:
Got my first @phattpiggie piece in the mail and it is beautiful !!

This is the best pic I could get and it still doesn't do it justice . I'm about to head out to a wedding , so I will have to break it in later . Thanks again for the amazing workmanship !!!!!!

That one's a beauty! PP's really on-top of his game :rockon:

baxter · May 6, 2017

cybrguy said:
As you have seen, the clouds really are NOT necessary to getting the effects you want. It is nice to have visual clues that you are getting the goods from your vape, but that is a bonus and not the most important part. The effects claim that mantle.
That being said, I bet over time you will see circumstances where you notice more cloudage, and that will lead to your narrowing in on the technique. Don't push yourself. It will come together over time. It did for me.

Yes, for me the first hit produces little visible clouds compared to hit 2 and 3

CanadianBakin · May 6, 2017

needalift said:
Did it come in a snapstash ?? Do you have to squeeze the sides to pop it open ??

These are the types of tubes I have.

Top to bottom:
SnapStash Large
SnapStash XL (not listed on dynavap.com)
nonaVonG XLS
tube my Omni XL came in (not listed on dynavap.com)
regular tube
VonG stem

All except the regular tube are squeeze to open.

Well, my SnapStash XL is currently just "open". The plastic hinge gave out a while ago (manufacturing defect for sure, not from excessive use) and the lid went flying behind the TV the last time I popped it open.

jambandphan03 · May 6, 2017

If I heat lower on the cap, for the first green hit, I can get a pretty full cloud, but also sacrifice the flavor pretty fast as it toasts it a bit hot if you start at the bottom of the cap, careful not to heat low for too long, I slowly move the jet flame up towards the top of the cap as I go so I don't burn it. Been there...done that...

needalift · May 6, 2017

CanadianBakin said:
These are the types of tubes I have.

Top to bottom:
SnapStash Large
SnapStash XL (not listed on dynavap.com)
nonaVonG XLS
tube my Omni XL came in (not listed on dynavap.com)
regular tube
VonG stem

All except the regular tube are squeeze to open.

Well, my SnapStash XL is currently just "open". The plastic hinge gave out a while ago (manufacturing defect for sure, not from excessive use) and the lid went flying behind the TV the last time I popped it open.

Nice collection of storage containers and two beautiful pieces . I never saw a snapstash xl so thanks for posting
@PeteSeattle i liked your post , but not because you lost your stash in an event where I'm sure it found another home . Sorry to hear that . On the bright side ( if you can see it ) I'm sure whoever found it will love and cherish it . Like paying it forward on accident . Hopefully something good will come to you in return .

hafalump · May 6, 2017

wow, the why don't you like vapcap thread was shut down. I don't like donald trump. shut me down.

Oregonglassblower · May 6, 2017

If you can sa

GreenHopper said:
So I have a nice glass flared 14mm GonG stem I had custom made for me by @Oregonglassblower.

I was thinking of trying my Ti Tip in the GonG end but it's very tight.

What do you think the likelihood is of the Tip expanding slightly when heated and shattering the GonG....in my face?

If you could safely try it out I would be willing to replace your piece for free if it cracked. If you could just cover the $7 shipping cost.
Also I do have some thinner shorter taper length 14mm male fittings that would allow a little more room on the inside diameter.
Let me know.

seaofgreens · May 6, 2017

@hafalump

The thread was becoming a shit show unfortunately.

PeteSeattle · May 6, 2017

needalift said:
Sorry to hear that . On the bright side ( if you can see it ) I'm sure whoever found it will love and cherish it . Like paying it forward on accident . Hopefully something good will come to you in return .

Oh I'm sure it will. The universe gives and sometimes you have to give back. I hope the person that found it is happy.

grokit · May 6, 2017

GreenHopper said:
Beautiful work there Phatt's, I lost 1.5hrs after my first use resulted in me just sitting there twirling it in my hands staring at the pretty patterns.

That's pretty sweet :tup:

Can the tip be inserted into either end?
Also is it lined, or does it have a condenser inside?

:sherlock:

jds · May 6, 2017

I've been experimenting with using ungrinded bud in my M today. It seems to work just as well as grinded weed, especially if I pack little buds down in there.

ClearBlueLou · May 6, 2017

I have 3 magnets from Dynavap - they all function the same: that is, there's no "snap-to-center" function, they hold the cap where I set the cap. NOT in contradiction to anything said here about magnets so far.

GreenHopper · May 6, 2017

Oregonglassblower said:
If you can sa

Hey bud, the Ti Tip barely fits in the end. I've bout some assorted grit sandpaper for glass working so will have ago at trying to get the socket a little wider.

I've thought a bit more about the issue of Ti expanding and believe George's design means the but where the Ti Tip goes into the glass socket will likely not cause the stem to crack. I believe this as George has shown that you can hold a Ti Tip by the O-rings section just after it was heated and it won't burn you due to the fins dissipating the heat so efficiently. Additionally DynaVap supply a glass stem that is far more fragile yet doesn't fracture when used with a hot Ti-Tip. So I'm happy to give this a go but first I gotta widen that socket slightly. I'll post a pic once I've got it working.

grokit said:
That's pretty sweet
Can the tip be inserted into either end?
Also is it lined, or does it have a condenser inside?

It's a really nice stem.

You can only fit the Tip on the black wood end. There is a metal core that runs the length of the stem. The Tip just fits on the black wood end and that's it, no room for the DynaVap condenser, not that you need it. This stem is designed to be used with a WT

PeteSeattle · May 6, 2017

Been working on some projects. In the QA stage :smug:

The clear

Newer take on an older design of mine. This time it's ...

... also a gong

More from the kiln soon!

ArthurJ · May 6, 2017

Nice!!

b0 · May 6, 2017

PeteSeattle said:
Been working on some projects. In the QA stage

The clear

Newer take on an older design of mine. This time it's ...

... also a gong

More from the kiln soon!

Been waiting for a clear GONG for ages, really interested mate!

PeteSeattle · May 7, 2017

b0 said:
Been waiting for a clear GONG for ages, really interested mate!

Thanks! And thanks @ArthurJ

Hint ... applied for business license

SSVUN~YAH · May 7, 2017

PeteSeattle said:
Thanks! And thanks @ArthurJ

Hint ... applied for business license

Awesome news!!!! :rockon:

Best of luck my friend! :bowdown:

baxter · May 7, 2017

tragique said:
I've been experimenting with using ungrinded bud in my M today. It seems to work just as well as grinded weed, especially if I pack little buds down in there.

I did a controlled analysis and found that I get one and sometimes 2 extra hits from ground up herb compared to nugs

Also I found the ABV was darker on the outside than in the middle of the nug. Reminded me of Chicken burned on the outside and pink in the middle

For this reason have been using ground up herb only

Vapor_Eyes · May 7, 2017

PeteSeattle said:
... also a gong

Mmmmmm... cobalt...

Bdubbdiblets · May 7, 2017

I love these things! So easy to maintain and effecient! As I stated before I think each one is worthy of a spot in the lineup but really love the hassle free omni...

I wonder when I will stop "testing".....I have been over medicating a bit lately!! :razz:

PPN · May 7, 2017

The "M" I ordered during 4/20sales is arrived, nice little vape!

I tested the original VapCap from the first batch before and the "M" is very similar in term of performances (clouds&taste). I'm on the list for a induction heater from @Pipes but I'm actually not very impressed about taste&clouds, in another hand it is efficient and medicate me well.

Although there is maybe a part of user mistakes.... do you pack it very tight as a conduction vape? My abv is not fully spent after 3 hits but doesn't produce a lot of more visible vapor... can i heat slightly more after the clic?

The difference I notice between the original and the "M" is the difference in abv color/extraction level, Original gave me dark abv (near blackened) and "M" give me lighter in color abv.

More to come...

lookhigh · May 7, 2017

@PeteSeattle Still loving the cobalt blue. Some day.

MrMonss · May 7, 2017

GreenHopper said:

Whow many thanks !!
I just wonder what material is inside these "bearing" tubes.
The low price could allow to try, the dimensions look good.

4pcs-LM8LUU-8mm-15-mm-45-mm-8mm-linear-ball-bearing-font-b-bush-b-font.jpg

GreenHopper · May 7, 2017

MrMonss said:
Whow many thanks !!
I just wonder what material is inside these "bearing" tubes.
The low price could allow to try, the dimensions look good.

Interesting idea but I feel it might not work.

When twirling the VapCap you tend to twist the body. A spinning body would negate the ability to twirl the VapCap.

The spinning mouth piece works because you tend to grip the mouth piece for stability while spinning the body.

Dynavap VapCap

20 going on 60

Well-Known Member

Well-Known Member

in flavor country

Well-Known Member

Well-Known Member

Well-Known Member

My Mind Is Free

Well-Known Member

well-worn member

Well-Known Member

unbearably light in the being....

20 going on 60

Well-Known Member

Well-Known Member

Cloudy...

Well-Known Member

You Must Unlearn, What You Have Learned...

Well-Known Member

taste buds

Well-Known Member

Volute of Vapor

FC member

Well-Known Member

20 going on 60