Dynavap VapCap

WakeAndVape

WakeAndVape

VapeLife X
ritual said:
Thanks for that! I didn't receive that mass email, it may have gone out before I ordered. I got my order confirmation then it was radio silence for 9 days so I was a bit worried. I heard back from Ariel today... apparently the info@dynavap.com address that they list as their contact information, and also show at the bottom of every email, is a mailbox that they don't monitor xD Ariel requested that any communication be sent to her address.

Relieved that they've at least reached out to me, I'm very interested in the product. I ordered a burl nonavong and plan to mate it with one of these guys:

rBVaG1ZP3fmAZm1fAAFQQ0lf6Wo308.jpg
Click to expand...
make sure the slide isn't too short...or buy a 14mm M to F adapter.

from the pic it looks like it might be.

I purchased a glass piece from a LHS (which I never do) and when I got the vong, I realized quickly it hit the bottom and didn't seal.
 
mrb

mrb

Accessory Maker
Accessory Maker
On 12th April I watched a video on the ‘M’ & Pre-ordered from Vape Piranha UK.

On 14th April I discovered the Dynavap sale and ordered the Ti-Woody + spares.

Today they both Arrived!! :) I’ve already tried them both . .

Still playing around on how to use them. Only got single flames right now with a double on order. I’m sure I’ll eventually work out my preferred method, but I’m getting damn pretty high while experimenting.

My initial reactions are. . that I like blocking the carb with the 2nd O-ring, I prefer the Ti-Woody’s light weight body, & I much prefer the Ti-Tip.. . .


Some pictures (everyone likes pictures :) ) of my entry into Dynavaping. . alongside the home made dynastashes I made in preparation. . . . . . I’m a carpenter and I just knocked these up as an experiment last week while I consider what I actually want out of a dynastash. . . .




upload image gif

One question! Any one got any idea why my dynacaps only attract to the edges of my magnets and not the centre? Obviously I used the wrong type of magnet . . but I haven’t googled this as of yet . . . :)


I’m also going to mention that my Ti-Woody body had a bit of a serious problem on arrival. The opening at the collared end where the tip inserts was not big enough. I could barely force the tip into the body or pull it out, regardless of lubrication levels. Both required EXTREME force and getting it in was almost impossible. And honestly, the o-rings would not have lasted more than 2or3 assembly/disassembly with that level of stress and friction. . . .
So I had to roll up a small piece of 240grit sandpaper put it in a drill and use it to open & smooth out the hole. Took me ages, because I went SLOW not wanting to make it too big. . . . Now it slides in & out perfect. .


Thanks to all the contributors here. From Vapcap care to butane filtration I’ve learnt a lot! :)
 
Last edited:
GreenHopper

GreenHopper

20 going on 60
phattpiggie said:
Had some good feedback on the first one of these I made, this one just needs to settle down after a wet sand.
Click to expand...

Thats looking amazing! Getting some Phatt-SAS (stem acquisition syndrome), love that Indian Summer style.

mrb said:
On 12th April I watched a video on the ‘M’ & Pre-ordered from Vape Piranha UK.

On 14th April I discovered the Dynavap sale and ordered the Ti-Woody + spares.

Today they both Arrived!! :) I’ve already tried them both . .

Still playing around on how to use them. Only got single flames right now with a double on order. I’m sure I’ll eventually work out my preferred method, but I’m getting damn pretty high while experimenting.

My initial reactions are. . that I like blocking the carb with the 2nd O-ring, I prefer the Ti-Woody’s light weight body, & I much prefer the Ti-Tip.. . .


Some pictures (everyone likes pictures :) ) of my entry into Dynavaping. . alongside the home made dynastashes I made in preparation. . . . . . I’m a carpenter and I just knocked these up as an experiment last week while I consider what I actually want out of a dynastash. . . .




upload image gif

One question! Any one got any idea why my dynacaps only attract to the edges of my magnets and not the centre? Obviously I used the wrong type of magnet . . but I haven’t googled this as of yet . . . :)


I’m also going to mention that my Ti-Woody body had a bit of a serious problem on arrival. The opening at the collared end where the tip inserts was not big enough. I could barely force the tip into the body or pull it out, regardless of lubrication levels. Both required EXTREME force and getting it in was almost impossible. And honestly, the o-rings would not have lasted more than 2or3 assembly/disassembly with that level of stress and friction. . . .
So I had to roll up a small piece of 240grit sandpaper put it in a drill and use it to open & smooth out the hole. Took me ages, because I went SLOW not wanting to make it too big. . . . Now it slides in & out perfect. .


Thanks to all the contributors here. From Vapcap care to butane filtration I’ve learnt a lot! :)
Click to expand...

Are we about to anoint another member of the Dynavap community with the 'Accessory Maker' tag?....My Magic 8 ball says...."It is decidedly so" :D

I'll take 10! In various woods and sizes. I want one with a motorised swing lid and OmniVap lifter. Obviously whistle activated and butane torch integrated. :lmao:
 
nickdanger

nickdanger

Collector of Functional Art
mrb said:
...Some pictures (everyone likes pictures :) ) of my entry into Dynavaping. . alongside the home made dynastashes I made in preparation. . . . . . I’m a carpenter and I just knocked these up as an experiment last week while I consider what I actually want out of a dynastash. . . .


Click to expand...
I'd love to have one of the long stashes for my blackwood @phattpiggie stem. Nice job!
 
R

ritual

Active Member
WakeAndVape said:
make sure the slide isn't too short...or buy a 14mm M to F adapter.

from the pic it looks like it might be.

I purchased a glass piece from a LHS (which I never do) and when I got the vong, I realized quickly it hit the bottom and didn't seal.
Click to expand...


Oh.. well shit. lol.

One would think that a piece advertised as fitting with 14mm glass joints would be designed to... well... fit inside a 14mm glass joint lmao.


Anyone have experience hitting one of these through an incycler? I have a 14mm leisure incycler that it should fit in but I'm worried there might be too much drag
 
exime

exime

Well-Known Member
Not to discourage dynavap adapters but there are some cool aftermarket pieces at sneakypete's that I thought were really cool.

They have this 3-in-1 adapter 10mm to 10mm/14mm/18mm that is compatible with the vapcaps and Davinci IQ mouth piece as well.


3_c6d877b0-b173-4b8c-9350-a5d5394290e8.jpg
 
DirtyD

DirtyD

Well-Known Member
Mrb I like your style. Am gonna make my own dynastashes as well, ( hobbyist woodcarver) and since I gotta sweet stash of rare, exotic woods I just gotta get unlazy... Nice work. Glad to see someone else is making their own.. Keep it up,D
 
DirtyD

DirtyD

Well-Known Member
When I got my M... Draw way too tight to get a good rip without seeing stars. Maybe not for evybody but JUST BARELY filing three little tiny small divets or tight small ( 1/2 mm or so) grooves right where the spirals reach top of tip. Gives just enuff xtra airflow to cut off carb all the way and get a huge rip without golf ball soda strawness...get a small diamond file or bring M to someone who can do it for you.. Easy ass mod and opened the M up for me big time... Do not file too deep or you won't get nuttin and you're bummed....peace and good luck... D
 
mrb

mrb

Accessory Maker
Accessory Maker
nickdanger said:
I'd love to have one of the long stashes for my blackwood @phattpiggie stem. Nice job!
Click to expand...

Thanks! Yeah, I made that longer dynastash as I was imagining I might want to upgrade the Ti-Woody to XLS. . . Now I have it I'm not so sure. I love how light & 'joint like' the Ti-Woody is.

I'm probably gonna experiment and have some fun making a few different ones. But I don't anticipate wanting to keep all that I make. So what's left might end up here for grabs. . . :shrug:
 
needalift

needalift

Well-Known Member
phattpiggie said:
Had some good feedback on the first one of these I made, this one just needs to settle down after a wet sand.
Click to expand...
Beautiful work as always !! I may have to get with you in the future about one of this acrylic pieces . They always look amazing !!
mrb said:
On 12th April I watched a video on the ‘M’ & Pre-ordered from Vape Piranha UK.

On 14th April I discovered the Dynavap sale and ordered the Ti-Woody + spares.

Today they both Arrived!! :) I’ve already tried them both . .

Still playing around on how to use them. Only got single flames right now with a double on order. I’m sure I’ll eventually work out my preferred method, but I’m getting damn pretty high while experimenting.

My initial reactions are. . that I like blocking the carb with the 2nd O-ring, I prefer the Ti-Woody’s light weight body, & I much prefer the Ti-Tip.. . .


Some pictures (everyone likes pictures :) ) of my entry into Dynavaping. . alongside the home made dynastashes I made in preparation. . . . . . I’m a carpenter and I just knocked these up as an experiment last week while I consider what I actually want out of a dynastash. . . .




upload image gif

One question! Any one got any idea why my dynacaps only attract to the edges of my magnets and not the centre? Obviously I used the wrong type of magnet . . but I haven’t googled this as of yet . . . :)


I’m also going to mention that my Ti-Woody body had a bit of a serious problem on arrival. The opening at the collared end where the tip inserts was not big enough. I could barely force the tip into the body or pull it out, regardless of lubrication levels. Both required EXTREME force and getting it in was almost impossible. And honestly, the o-rings would not have lasted more than 2or3 assembly/disassembly with that level of stress and friction. . . .
So I had to roll up a small piece of 240grit sandpaper put it in a drill and use it to open & smooth out the hole. Took me ages, because I went SLOW not wanting to make it too big. . . . Now it slides in & out perfect. .


Thanks to all the contributors here. From Vapcap care to butane filtration I’ve learnt a lot! :)
Click to expand...
Those stashes look great !!!! @xlr8shun posted this link a while back . It should help with your magnet question .
https://www.kjmagnetics.com/magdir.asp

Edit : forgot to post the link :lol:
 
Last edited:
almost there

almost there

Well-Known Member
The M's I ordered from the release sale vs the M's I received from the 4/20 sale are slightly different besides what has already been posted about the tips. Unfortunately I gave both of the earlier M's away so I can't be absolutely certain. I feel almost sure the newer M's are slightly skinnier and the caps are looser too. Can anyone confirm this please, noting important but just curious if I'm right.
 
Last edited:
MrMonss

MrMonss

Well-Known Member
Hi Guys,
Concerning DIY projects, as I ordered an Omni Condencer but have no body in 45mm (i tought the glass of the OG would fit).
I have set myself the goal of making one by myself.
I have swept the various option easily (saw a driptip of ecig seems to be able to do the trick, but one must have confience to materials such as aluminium or plastic).
At work i have access (not officially) to wooden oldschool stamps like this one :

img-20170505-104016_imagesia-com_1dypd_large.jpg


Is it enough to fit it to the size of 45mm and drill it to 8mm internal diameter so that would fits well ?
Do I have to drill an air hole too ?
Can i trust this wood or the varnish that surrounds it ? (This stamp must be from the 60's)..
 
You must log in or register to reply here.
Top Bottom