Divine Tribe atty's

Vapology

Vapology

Well-Known Member
florduh

florduh

Well-Known Member
lt996nwkjt501.jpg


An all quartz atomizer. I can't wait to see what this thing can do. Hoping there will be other colors available, but the more I look at it, the more it grows on me.
 
OF

OF

Well-Known Member
invertedisdead said:
Gen 2 needs a zirconia housing and it will be on point!
This will allow the oven to do its thing without the body and mouthpiece ever becoming uncomfortably hot, that way we can ditch that silicone tip! It's a killer little vape but it could be GREAT.
Click to expand...

Zirconia is cool stuff for sure (extremely dense, hard ceramic) but it's not magic. It was used extensively in the TB Cera and very definitely gets hot in use. 15 or more minutes and you're hanging onto the bottom end, inches away from the oven. Or else. It takes longer than otherwise (it's an excellent insulator) but that also means it also takes longer to cool....... No free lunches that way.

If you want a cool MP you'll need to do more than tweak the material. All that offers is a shift in time frame?

OF
 
invertedisdead

invertedisdead

PHASE3
Manufacturer
OF said:
Zirconia is cool stuff for sure (extremely dense, hard ceramic) but it's not magic. It was used extensively in the TB Cera and very definitely gets hot in use. 15 or more minutes and you're hanging onto the bottom end, inches away from the oven. Or else. It takes longer than otherwise (it's an excellent insulator) but that also means it also takes longer to cool....... No free lunches that way.

If you want a cool MP you'll need to do more than tweak the material. All that offers is a shift in time frame?

OF
Click to expand...

I don't think it's magic, but I do think it's a good solution for these parts, especially in an on demand design like the gen 2. A shift in time frame would serve as a proper solution for the way most use this vape I'm betting. I find the vapor performance drops off as soon as you let off the fire button with the Gen 2, so I would be interested in hearing how people are managing long sessions if they are doing them. Seems like it would get exhausting with the short cutoff times.
 
PPN

PPN

Volute of Vapor
Disappointed to see there is still no wpa for the Gen2 dry herb atty but, in another hand it is not very used lately.... But I ever dreams to connect it to a water tool, any setup I tried was satisfying enough.

Can't wait for the Quartz quest!
 
OF

OF

Well-Known Member
invertedisdead said:
A shift in time frame would serve as a proper solution for the way most use this vape I'm betting.
Click to expand...

It might, but experience with just this (heat transfer through Zinconia insulation) didn't work all that well where the ceramic layer was much thicker and the heat had to 'climb' through an inch or so 'up' and through a layer almost half an inch thick. It too needed a silicone cover for multi hit use.

Worth a try, but I wouldn't hold my breath on it. Doing concentrates (the EO cart) there are no real problems since time is so short, but with herbs it is an issue even with a single user usually. I doubt it would be much different here.

Fun stuff, regards to all.

OF
 
invertedisdead

invertedisdead

PHASE3
Manufacturer
OF said:
It might, but experience with just this (heat transfer through Zinconia insulation) didn't work all that well where the ceramic layer was much thicker and the heat had to 'climb' through an inch or so 'up' and through a layer almost half an inch thick. It too needed a silicone cover for multi hit use.

Worth a try, but I wouldn't hold my breath on it. Doing concentrates (the EO cart) there are no real problems since time is so short, but with herbs it is an issue even with a single user usually. I doubt it would be much different here.

Fun stuff, regards to all.

OF
Click to expand...

What material would you use to improve the user friendliness of the Gen 2?
 
divinetribe

divinetribe

We are trying our hardest to become Medical Grade
Manufacturer
hello,
so the quartz quest will be here around jan 7th i hope. discounts will be available to all past customers just email me. I will have a few complimentary ones set aside for my testers on here. same people as the v3 pretty much. you know who you are i will message you when i have them in hand. on The generation 2 dry herb mouth piece that connects to 18 mm I’m just waiting. seems to be slow going with my supplier on getting it done. those should be here in January also. also i have a multipurpose wax rda coming soon and a few other things in the works. The Quest will be $42 retail
A7562_A08_CF22_417_B_9_B73_305627_EE5308.jpg
D2_A300_B8_911_C_4_B2_E_BE6_D_5784_E2894_F67.jpg
 
Last edited:
looney2nz

looney2nz

Research Geek, Mad Scientist
Vapology said:
So @Vape Donkey 650 is the official beta tester from @divinetribe ...!? :brow:
Click to expand...

I didn't say that :) I'll let Matt and @VapeDonkey650 speak for themselves.
They have worked together on some stuff (is that still on deck guys?).

Good timing, I'll roll in parts for my v3's with a couple new goodies :)
Order comin' up Matt!
 
invertedisdead

invertedisdead

PHASE3
Manufacturer
Man I can't wait for this. The last few months I pretty much stopped using all my pens and went back to a torched quartz banger because of the ability to swab after use for a fresh hit, so I'm really looking forward to putting this under the gauntlet against my e-nail and quartz nails.
 
PandaLee

PandaLee

Well-Known Member
invertedisdead said:
Man I can't wait for this. The last few months I pretty much stopped using all my pens and went back to a torched quartz banger because of the ability to swab after use for a fresh hit, so I'm really looking forward to putting this under the gauntlet against my e-nail and quartz nails.
Click to expand...

This is why the top airflow sai recently became my goto device and the one I shared the most. I was able to swab clean after every session. Even though I didn't want to go back to dabbing off titanium (their quartz offering sucked), it grew on me because it was easy to load and clean. But then the donut under the cup cracked...probably because I tried to rush it back to use after an ISO cleaning (didn't let it dry completely I think). So no replacements as of now, or I can try replacing just the donut from a previous coil.

Can't wait for the quartz quest. I want to order now so it ships to me as soon as it gets in the door! Doesn't look like it'd be inconspicuous like some of the attys I currently run in public (that end up looking like regular tobacco vape mods), but the performance looks like it will be the best out there for a portable dab device!
 
invertedisdead

invertedisdead

PHASE3
Manufacturer
PandaLee said:
This is why the top airflow sai recently became my goto device and the one I shared the most. I was able to swab clean after every session. Even though I didn't want to go back to dabbing off titanium (their quartz offering sucked), it grew on me because it was easy to load and clean. But then the donut under the cup cracked...probably because I tried to rush it back to use after an ISO cleaning (didn't let it dry completely I think). So no replacements as of now, or I can try replacing just the donut from a previous coil.

Can't wait for the quartz quest. I want to order now so it ships to me as soon as it gets in the door! Doesn't look like it'd be inconspicuous like some of the attys I currently run in public (that end up looking like regular tobacco vape mods), but the performance looks like it will be the best out there for a portable dab device!
Click to expand...

The metal mouthpiece will be more discrete, Matt said he's anticipating around February for that part. This vape has always been designed with the idea of offering both glass and metal mouthpieces. Would be sweet if the metal MP was titanium to keep everything nice and light.

I live in SoCal so the stock MP will be plenty discrete for me. I was at a crowded lake yesterday firing up torch dabs on a 10 ft fishing boat lol. :D
 
florduh

florduh

Well-Known Member
Yeah I have mostly gone back to a quartz banger and torch over my Wax Pens. Since VapCap's are fashionable I figured torches were making a comeback!

I want an e-nail, but I travel pretty constantly for work so having one set up in a hotel room or AirBnb isn't super feasible.

I really really hope the Quest will be as good as a Quartz banger and torch.
 
You must log in or register to reply here.
Top Bottom