Discontinued The RBT Milaana (unregulated single 18650)

Status
Not open for further replies.

TheRobbo

Well-Known Member
I have been having pretty good success micro dosing, with just enough product to cover the screen. No idea how little I put in there but its really just a pinch I could probably count the crumbs. Then pack in pretty tight with my pinkie, then flatten the edges with blunt end of the stir stick making sure there are no obvious gaps to let air tunnel through. Then a decent preheat then really slow draw to get the load temp up... then once I feel heat monster the draw! I get 2 or 3 great rips like this before its spent.
Admittedly the vapour is hot and I can get some scorching but its not like I am flavour chasing (which would be bigger load but almost zero pack and start drawing with no preheat and feather the button, but it can take me 15-20 mins to finish) if doing this I just want a couple decent hits quick smart and it delivers! I am using a maple stem almost exclusively dont know if this is contributing to my success due to the different thermal properties of wood to glass but I suspect it would work in a glass stem as well.
 

AJS

Calm Consistency
Then pack in pretty tight with my pinkie, then flatten the edges with blunt end of the stir stick making sure there are no obvious gaps to let air tunnel through. Then a decent preheat then really slow draw to get the load temp up... then once I feel heat monster the draw! I get 2 or 3 great rips like this before its spent.
Admittedly the vapour is hot and I can get some scorching but its not like I am flavour chasing (which would be bigger load but almost zero pack and start drawing with no preheat and feather the button, but it can take me 15-20 mins to finish)
This is almost word for word how I do both of the aforementioned sessions! Microdosing and flavor chasing done right!
 

TheRobbo

Well-Known Member
@TheRobbo, how do you find the maple stem compared to glass, in terms of heat?
It definitely steals much less heat from the vapour which you would think would mean hoter on the throat, but this is not the case! Because it steals less heat the load gets more meaning less button time so less total heat. It also gives more feedback so its easier to stay at that perfect temp :tup:
Of course this is subjective and ymmv.
I am a big fan of the wood stem I was sceptical at the start but needed that unbreakableness that it provides as I am a clumsy mofo, but have fallen in love with it.
On a side note I haven't cleaned my screen or stem since I got the stem at the end of July and it is good as new stem only has a faint smell I can leave it in the kitchen and my wife cant smell it :nod:

Edit changed one word! 10 points who can tell the idiot who got it wrong in the first place...
Clue its not an object :doh:
 
Last edited:

Baron23

Well-Known Member
@Baron23 you are goons love it! Which wood you get?
Rock maple as the more exotics were pretty much out of stock. I'm lined up for a Spalded Maple as soon as @cannabis.pro gets more in early 2018.

I will either keep this one, use it as a loaner, or perhaps make a charitable donation with it.

Really like your vid...quick, articulate, and to the point. Well done!!
 
Last edited:

WakeAndVape

VapeLife X
You continually make some of my favorite vape vids...rock on! 4:00 mark is priceless!
Thanks for the kind words! that means alot coming from a true FC OG :cheers:

According to RBT’s Instagram, the Mi2 beta test has already begun. How long was the Mi1 beta test until they started selling it? I can’t wait to buy the Mi2.
If the Mi's 'Beta' period is any indicator of when the Mi2 will arrive...we could be 'waiting a while' :dog:
back then, there was so much to work out on the tech end...FUCK.

go read some of the early parts of the thread during the 'great wait' plenty of :popcorn: and :chill:

I imagine the process will be alot easier this round
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
According to RBT’s Instagram, the Mi2 beta test has already begun. How long was the Mi1 beta test until they started selling it? I can’t wait to buy the Mi2.

Its not following a path like it did before, different testers etc. and this seems more an incremental update, so nothing crazy new that should need heavy testing probably... But we shall see (I was one of first Mi beta testers btw)
 

Other Side

Retailer
Retailer
I'm pretty sure Ryan has only made one Mi2 and it's coming my way. I'll discuss further after I have had time with it and talked to Ryan about what he wants me to share but I suspect it will be a little while before this hits the street.

What we know now for those who can't wait:

*Still unregulated
*Smaller than previous versions (will show comparison later)
*Air inlet replaced by a carb hole (just above the trigger button) to provide some user fine tuning to air flow

More to come later but right now focus is on Splinter. Not sure if Ryan is planning on building more beta units and if so, when. We have not discussed.
 

namasteIII

Well-Known Member
I'm pretty sure Ryan has only made one Mi2 and it's coming my way. I'll discuss further after I have had time with it and talked to Ryan about what he wants me to share but I suspect it will be a little while before this hits the street.

What we know now for those who can't wait:

*Still unregulated
*Smaller than previous versions (will show comparison later)
*Air inlet replaced by a carb hole (just above the trigger button) to provide some user fine tuning to air flow

More to come later but right now focus is on Splinter. Not sure if Ryan is planning on building more beta units and if so, when. We have not discussed.

Is the using the carb going to be mandatory? because id rather not, or will it hit the same left open but now people have the option to play with it if they want.
 

Other Side

Retailer
Retailer
Is the using the carb going to be mandatory? because id rather not, or will it hit the same left open but now people have the option to play with it if they want.
I don't have it yet so hard to answer but I think covering it and/or feathering it will be natural to where your finger normally falls. If you are against having to hold your finger over it I suspect you could plug the hole similar to how the Hydrobrick works.
 
Last edited:

namasteIII

Well-Known Member
I don't have it yet so hard to answer but I think covering it and/or feathering it will be natural to where your finger normally falls. If you are against having to hold your finger over it I suspect you could plug the hole similar to how the Hydrobrick works.

Okay interesting, we will have to see how it works for you. Well enjoy it when you get it!
 

cannabis.pro

aka 420EDC
Accessory Maker
I got my WPA from @cannabis.pro Monday and boy howdy. I had to gerrymander a couple of screens to fit the larger opening but all the specs are spot-on and it works like a dream. Since I got my Omnivap the Milaana has been retasked to nighttime water works. Something it does extremely well.

Just ordered mine from 420edc. Can not wait!

Thank you both for the support! It's always a pleasure shipping out Milaana and helping folks along the way.
 

WakeAndVape

VapeLife X
I got my WPA from @cannabis.pro Monday and boy howdy. I had to gerrymander a couple of screens to fit the larger opening but all the specs are spot-on and it works like a dream. Since I got my Omnivap the Milaana has been retasked to nighttime water works. Something it does extremely well.
Try an omni session with a milaana session right after... :science:

I like the combo high :brow:
 
Status
Not open for further replies.
Top Bottom