Cheap High Quality Bubbler
- Thread starter Bleezy
- Start date
-
- Tags
- cheap bubbler glass
D32320
Noob Saibot
Would love to see a video of it in action with the least amount of water you can feasibly use @D32320 !
Surely it doesnt need this much? -
Absolutely!
https://streamable.com/syh99
That’s probably the absolute lowest I can get the water level while still functioning; just submerging the perc.
cybrguy
Putin is a War Criminal
I can see how that could be a problem, but I suspect PBW should do the job. It's not the kind of piece that should collect a lot of reclaim using flower and there are no tight channels that might NEED a brush.
FlyingLow
Team NO SLEEP!
When I was coming into the glass game, CCG did not mean "Clean Clear Glass" it meant "Color Changing Glass."
Did anyone else used to buy cheap quality glass from colorchangingglass.com? I got a triple donut sidecar bubbler from that site.... sadly the website is no more.
Did anyone else used to buy cheap quality glass from colorchangingglass.com? I got a triple donut sidecar bubbler from that site.... sadly the website is no more.
ataxian
PALE BLUE DOT
I bought this from steve79 at https://www.dhgate.com/
I will have to change my mouthpiece for a smaller one.
Otherwise not bad! (cheap)
Modnote: Edited to fix DHGate's URL
Last edited by a moderator:
ataxian
PALE BLUE DOT
Hey @ataxian Buddy!!
I feel the need for some new glass from China!
Do you have either of these two pieces?
I am leaning more towards the dual bubbler setup as i think it would add more cooling.
Also looks like a very stable base!
What do you think?
I have both!
The Bottom one: FC 186 I think? (USE IT a LOT) With a mouthpiece reducer!
Some people like a "HUGE HOLE" sorry! (My bad!)
Would love to see a video of it in action with the least amount of water you can feasibly use @D32320 !
Surely it doesnt need this much? -
I've looked but not found... Something like the FC186 but with only ONE perc in it? Or slightly taller d020 style that uses as little water as the d020. Something where the water doesnt shoot back up the downstem when one stops drawing.
I thought the CCG with seed of life perc might do it but theres still too much water and the water still shoots back up the downstem part.
Anyone got any ideas?
AHHHH HA!
SPOT ON!
I STAND CORRECTED!
I thought the CCG with seed of life perc might do it but theres still too much water and the water still shoots back up the downstem part.
Anyone got any ideas?
AHHHH HA!
SPOT ON!
I STAND CORRECTED!
Last edited by a moderator:
Hello and happy Saturday in Canada! I have ordered the FC 186 from Steven myself actually. I had looked at it before but wasn't drawn at the time. But woudln't be right for the underpowered Herbo XL anyway.Hey @ataxian Buddy!!
I feel the need for some new glass from China!
Do you have either of these two pieces?
I am leaning more towards the dual bubbler setup as i think it would add more cooling.
Also looks like a very stable base!
What do you think?
So it was basically Newvape's new recommendation that made me think, why not?
However I was a bit confused and torn necause Edwyn linked the 34 cm model from Steven , which you show above.
And in the photo he shows of the actual FP set up, with Mobius logo and Newvape bottom base logo- it is a different model to the one Steven sells- much shorter and slightly different moithpiece shape.
So I was torn which one to go for. There are others on Dhgate at different heights. Maybe I will get a shorter one myself later on. I do like Edwyn's preference for individual rigs. So easy to accomplish with the Flowerpot. And fun too! I have a few different bowls for that purpose also.
So keep that in mind about the different heights, maybe a shorter one would be better? Or just different Im sure. The one Newvape shows in the photo looks quite classy though. This is the one:
http://fuckcombustion.com/threads/newvape-flowerpot-twax-vaporizer.23162/page-180#post-1174997
Anyway man see what you think. Im getting very nicely stoned here in UK today. Our outdoor autos really are very good you know! It doesnt make sense how potent they are after the summer we had.
Herbie for me today, FP arrivig Monday but not sure when I will have a controller yet. Hope it works for me- with very nice weed at last. Fingers crossed!
I trust you have been enjoying a device or two yourself today!
Good luck with your ongoing house viewings, hope it doesn't take too long. We should have a bet- what sells first, your house or my Aromed?
My money is on you actually bro!
But I dont mind that and am happy to wait in line.
Last edited:
cybrguy
Putin is a War Criminal
As much as I have wanted a FAB because they look so cool, in terms of function I think the 9" straight can above is a better choice. Anyone disagree?
Added: Heh heh heh, I asked pretty much the same thing just at the top of this page. Sorry. At least it shows some consistency in thought, tho maybe not a particularly good sign for the memory.
Actually, nope, I favored the FAB above. Ha ha again...
You'd think I was a stoner or something...
Added: Heh heh heh, I asked pretty much the same thing just at the top of this page. Sorry. At least it shows some consistency in thought, tho maybe not a particularly good sign for the memory.
Actually, nope, I favored the FAB above. Ha ha again...
You'd think I was a stoner or something...
Last edited:
snackmaster
Well-Known Member
Try searching “mobius scope”
It seems to me like the faberge perc functions better in the round egg than the straight fab. Plus I figured the simpler one would be easier to clean. The sandblasted straight fab is really sweet looking though, I almost went for that one. The base is nice and sturdy on these which is great for the flowerpot or other enails.
Woah, I think thats the one. I'll do some more looking but first looks seems like thats the one for me for sure!
Thanks muchly!
EDIT: Dammit, can only see 14mm connection versions. So close...
Last edited:
That is great news well done!
On with your new happy life now I guess. Do keep us all posted on your choice of new glass if you get any. I also like the straight 9 inch CCG piece @invertedisdead has. It is on my list, as is the shorter FC-186 model. All in good time my friends!
cybrguy
Putin is a War Criminal
Well, that's pretty darn close to the one I had @Oregonglassblower make me for my UFO.
Mine is US jointed, BTW, in case I want to use it with my Zion or Milaana...
ataxian
PALE BLUE DOT
I like this set-up, however I feel the mouthpiece is a bit large?
Maybe Mike from OGB can make a smaller one?
cybrguy
Putin is a War Criminal
The joint is 19mm if that is what you mean. Mine came with a simple short (about 4") 19mm MP and a connector for a whip. Don't remember if it came with tubing, but I tend to buy my own to be sure what it really is. If it came with any I threw it out. I tend to use the custom MP I posted above.
Trying to find what gauge tubing I bought for it but I havn't been able to.
Trying to find what gauge tubing I bought for it but I havn't been able to.
Last edited:
Planck
believes in Dog
Yeah the diameter of the tubing is what I am asking about.
I have one coming and want to order some proper tubing for it.
cybrguy
Putin is a War Criminal
Just found my order from Amazon back in 2014. This is what I bought for about $15...
White SiliconeTubing, 1/4"ID, 7/16"OD, 3/32" Wall, 10' Length
https://smile.amazon.com/White-SiliconeTubing-ID-Wall-Length/dp/B003TJ9YQU/ref=sr_1_1?s=industrial&ie=UTF8&qid=1509923709&sr=1-1&keywords=White+SiliconeTubing,+1/4"ID,+7/16"OD,+3/32"+Wall,+10'+Length
Added: I bought 10' because I expected to periodically change the whip as it got smelly and dirty. As it turns out, I hardly ever use a whip with any of my glass or vapes, so 10' was way more than I needed.
White SiliconeTubing, 1/4"ID, 7/16"OD, 3/32" Wall, 10' Length
https://smile.amazon.com/White-SiliconeTubing-ID-Wall-Length/dp/B003TJ9YQU/ref=sr_1_1?s=industrial&ie=UTF8&qid=1509923709&sr=1-1&keywords=White+SiliconeTubing,+1/4"ID,+7/16"OD,+3/32"+Wall,+10'+Length
Added: I bought 10' because I expected to periodically change the whip as it got smelly and dirty. As it turns out, I hardly ever use a whip with any of my glass or vapes, so 10' was way more than I needed.
Last edited: