dampo
Well-Known Member
Anybody know more about this"plus"version"? (can't search for this word)
-
SCAM WARNING! See how this scam works in Classifieds.
Multi-brand Xmax V3Pro vaporizer, convection, on-demand&session.
- Thread starter PPN
- Start date
Photonic
Lesser-Known Lurker
Looks like the POTV version of the V3 Pro is now being sold in other places?
No, that's just the X-Max glass top, not the potv one. I can't see anything about it that differs from the original other than a different set of accessories out of the box.
Not that the original needs improvement. My V3Pro was the MVP yesterday, chomping through dosing caps and chucking enormous clouds.
Not that the original needs improvement. My V3Pro was the MVP yesterday, chomping through dosing caps and chucking enormous clouds.
seedy53
Well-Known Member
stainless steel oven. doesn't the og version of xmax and potv v3 pro's all have the same oven? Pro+ is just a Same glass tube MP setup, nothing different?
Hasn't it always been stainless steel? In any case, XMAX is known for applying device improvements mid production, soft updates of components, or just generally adjusting the device to be as good as it always could be. One of the reasons I adore the "current" v3pro in spite of being disappointed with the original offering.
If this is just minor adjustments or a different base configuration, that wouldn't surprise.
If this is just minor adjustments or a different base configuration, that wouldn't surprise.
Petetbay
Well-Known Member
Looks like a Xmax version with glass mp instead of the OG duckbill mp. Doesn’t appear to be the POTV version as they use their own glass mp which has a taller mp base compared to the Xmax glass mp. The duckbill mp with it’s magnets that fall off won’t be missed imo.
Last edited:
seedy53
Well-Known Member
you soak peek or any plastic in 91% iso? or even zirconia? i'm i the only one who see a problem or issue with doing so?The reason i am looking into another MP is the result of soaking it in iso, i didn't read the manual......
Piecho
Well-Known Member
You can get only the mouthpiece itself. Would recommend any of the glass options myself.The reason i am looking into another MP is the result of soaking it in iso, i didn't read the manual......
dampo
Well-Known Member
I'll get the Glass Water Pipe Adapter i guess, gives me the possibility to either use it with glass or as a mouthpiece.
prayerplant
Well-Known Member
That's exactly what I use, much superior to the original mouthpiece for mouthfeel and cleaning and easily dropped into a 14mm glass piece.
I upgraded to the POTV mouthpiece and I like it a lot more:
POTV Bubbler, Water Pipe & Glass Accessory Adapter for V3 Pro
Use any of our water pipe, glass bubbler and glass accessories with your XMAX V3 Pro adpater! ✅ Fast shipping and friendly customer service - Shop Now!
I have a lot of those kinds of stems from vapcaps, HR, and firewood so it has been great.
Although it looks like you are possibly in Europe so your access may vary.
X-MAX V3 Pro - Glass Water Pipe Adapter
✅A glass water pipe adapter that allows you to attach your X-MAX V3 Pro vaporizer to a water filter that has a 14.5 mm female connection. The filtration of the vapor through the water allows it to be cooled and moistened, which significantly increases the comfort of inhalation. 💨 take advantage...
vapefully.com
I have this adapter from POTV. It can double as a mouthpiece. The magnets are sealed inside.
Don't know how create threads
I need some advice
As I am new to dry herb vaping
Getting xmax V3 pro for xmas
I am Confused in some posts about batteries
This may be a dumb question
I'm confused what 40-80c
Some batteries say don't exceed 40-80c
With some of the batteries
So I'm planning on
Sony vtc 5a
Molice M35
I read best battery is p26A but it's out of stock all the places I see
The question I have with these batteries
Can you still use the Xmax V3 pro as reg vaping like go up 400F- 420 high temperature
And would this be a good charger
imrbatteries.com
I need some advice
As I am new to dry herb vaping
Getting xmax V3 pro for xmas
I am Confused in some posts about batteries
This may be a dumb question
I'm confused what 40-80c
Some batteries say don't exceed 40-80c
With some of the batteries
So I'm planning on
Sony vtc 5a
Molice M35
I read best battery is p26A but it's out of stock all the places I see
The question I have with these batteries
Can you still use the Xmax V3 pro as reg vaping like go up 400F- 420 high temperature
And would this be a good charger
Efest LUC V4 4 Channel Battery Charger
Upgrade your charging experience with the Efest LUC V4 4-Channel Battery Charger, a high-performance solution for your 3.6V/3.7V Lithium Ion IMR batteries. Designed for versatility and efficiency, this advanced charger offers four independent channels with selectable amperage options to suit...
Brandao444
New Member
Hey guys, I'm almost selling mine after some people also reported a chemical taste in the v3 pro. I would vape and feel sick. I don't know if it could have been in my head, but after seeing similar reports I saw that I wasn't crazy. Do any of you have reports similar to mine? Chemical taste, nausea after vaping? Please tell me? Are there carcinogenic chemical compounds in it?
Photonic
Lesser-Known Lurker
Did you perform any burn off steps before using the device? How much use has the device seen in total?
I've purchased two v3 pros about a year apart, and neither had this issue after burn in.
XpeeN
Well-Known Member
Cannot reproduce with my unit.
Brandao444
New Member
But can you tell me if it has carcinogenic components?
The worst thing is that I didn't do this step at the beginning, I only did it after 3 days, but it still continues...
Photonic
Lesser-Known Lurker
No I can't. Here's a link to the product teardown so you can see what's inside.
XMAX V3 Pro Disassembly
This guide will walk you through the steps to disassemble the XMAX V3 Pro, providing a detailed look at its internal components.
www.ifixit.com
I suggest researching the best ways to burn off and then clean your device and do it again.