NOLOGO
Well-Known Member
definitely not. They are completely different devices
EDIT: oh you probably mean will the glass piece that inserts into the POTV One fit into the opening of the new POTV V3? That I don't know, but I will soon enough!
Multi-brand Xmax V3Pro vaporizer, convection, on-demand&session.
- Thread starter PPN
- Start date
EDIT: oh you probably mean will the glass piece that inserts into the POTV One fit into the opening of the new POTV V3? That I don't know, but I will soon enough!
Pukka
Well-Known Member
I wonder why the spikey stem's so short. I wasn't expecting a full length Dyna-Spikey stem length, but dayum, only 2 spikes??? It looks way shorter than the Xmax original and I think that's too short (hence why I use a Dyna-Spikey).
TBH, except for the "Damn Brush" I'm more excited for the green model.
TBH, except for the "Damn Brush" I'm more excited for the green model.
Petetbay
Well-Known Member
Yes and how depending which one. The OG Fury 2 wpa used the glass bowl stem like an Arizer. People have posted here using this one, I have a Fury 2 dimpled/w curved mp that has the glass bowl. I believe the OG POTV One used the accessory mp without the glass bowl wpa and the new POTV One uses the same with a new accessory adapter, the new accessory wpa/mp glass for POTV One and POTV V3Pro I believe are the same.
I think they missed a couple of opportunities with the brush, it should have been flat on the end to tamp loads and seat filters plus I do not like the twisted wire at the business end as it will no doubt scratch stuff as the bristles get worn down.
The emerald green does look great!
Like @Petetbay said, yes, the Fury2/POTV One/Fenix Mini WPA fits our Xmax V3Pro chamber although it jiggles a little (V3Pro chamber is slightly wider than the Fenix Mini one) and I noticed I tend to char the load with the Mini's WPA, I believe it's cause the heat stream is forced in a smaller area but, if you lower T°, you are good to go. Load size is rather minimal, it's a 2-3 hits bowl size max.
Happy to see you here, what do you mean by "they missed a couple of opportunities" about the brush? I didn't gave any look at this "damn brush" but I thought Stickstones designed something smart&usefull... I'll give a look at this brush... thank you for sharing your smart ideas to improve the brush, I'll transmit to our team in case we manufacture the brush for POTV!I think they missed a couple of opportunities with the brush, it should have been flat on the end to tamp loads and seat filters plus I do not like the twisted wire at the business end as it will no doubt scratch stuff as the bristles get worn down.
The emerald green does look great!
stickstones
Vapor concierge
It's just a brush. The marketing is way over the top for that brush, for some reason. Stiffer bristles and a nice handle.
Pukka
Well-Known Member
2 questions, please: 1) what are the bristles made of? 2) will they be available seperately (perhaps in a 3-pak like S&B)?
Thanks
The v3pro is a great little vape
It performs very similar to the hr edge but a slightly "cleaner" taste
I run it 20° hotter than the edge to get the same performance
Easy clean using the hr dosing caps I have
I only use caps and so removed the screen in MP, now it goes straight from cap to airpath and has better airflow and vapour production
Amazing how cool it is with such a short airpath, easily cleaned in the US cleaner (the cooling path inside the mp)
Removable battery and the price tag make this a real winner for me to recommend to people on a budget
Impressive stuff bringing performance at an accessible price to ppl
Vaping should be accessible to everyone to better their health and this is a worthy entry level vape
Well done xmax
It performs very similar to the hr edge but a slightly "cleaner" taste
I run it 20° hotter than the edge to get the same performance
Easy clean using the hr dosing caps I have
I only use caps and so removed the screen in MP, now it goes straight from cap to airpath and has better airflow and vapour production
Amazing how cool it is with such a short airpath, easily cleaned in the US cleaner (the cooling path inside the mp)
Removable battery and the price tag make this a real winner for me to recommend to people on a budget
Impressive stuff bringing performance at an accessible price to ppl
Vaping should be accessible to everyone to better their health and this is a worthy entry level vape
Well done xmax
Last edited:
Notcoded419
Well-Known Member
Is this for sure? If I could attach my bb9, that would be bad ass.
@stickstones are the POTV accessories that some with them POTV v3 gonna be available for folks who already have a v3 to purchase?
jasp3r
Well-Known Member
I hope so.
If they really choose to not list that accessory and make it exclusive to buying another XMax V3 pro (same device just with POTV stamp) I think I'm just about done with POTV then.
No reason to keep that part exclusive when POTV sells the stems for the adapter...
I mean lets not overreact here. POTV has some great stuff, great extras/rewards and a return policy. They are one of the great shops IMHO. And love that they work with vape makers to put their spin on their devices to make them even more appealing to enthusiasts.
jasp3r
Well-Known Member
Perhaps an overreaction to me but are they really going to tout that they redesigned the mouthpiece accessory and not make it avalible to everyone with existing devices? Just seems silly
Agree that I'd like to have that option too. But who knows what weird packaging, logistics sort of stuff may be at play.
vapviking
Old & In the Way
stickstones
Vapor concierge
I'm sure the new Accessory Attachment will be available separately. Not sure when, as that is dictated by supply. It's available for the ONE, and I see no reason to detour from that route.
@Pukka iirc, the bristles are organic - I think from the Agave plant, but don't quote me on that until I can check my notes. Available by itself, but I don't think in 3-packs.
@Pukka iirc, the bristles are organic - I think from the Agave plant, but don't quote me on that until I can check my notes. Available by itself, but I don't think in 3-packs.
Pukka
Well-Known Member
You had me happy when you said organic. Many similar brushes use synthentics (yuch!) so the wood handle had me hoping. 3-packs would be cool but in no way a deal buster like melting bristles
Thanks for your answer.
Petetbay
Well-Known Member
Good to hear, figured so. I asked about the availability of the POTV upgrade on the blog post in Canada and got this response.
Pete • 3 days ago
Will the POTV V3Pro accessory adapter be available for purchase by itself.
Mike Traynor Mod Pete • 3 hours ago
Hey Pete, good question. We're putting together a kit that will allow all Xmax V3 Pro users to upgrade their vape to the POTV Xmax V3 Pro. Eta is between 30 to 45 days out.
Take care,
Mike
kokolokokolokon
Well-Known Member
Even beeing colorblind I can say the new emerald green on the v3 pro is stunning
I had a v3 pro from the first batch but from Lacentralevapeur (katalyzer) and i have to say this one has a faster on demand mode and a smoother buzz
Thank you @XMAXVAPORIZER !!
Fat Freddy
FUCK CANCER TOO !
Good to hear, figured so. I asked about the availability of the POTV upgrade on the blog post in Canada and got this response.
Pete • 3 days ago
Will the POTV V3Pro accessory adapter be available for purchase by itself.
Mike Traynor Mod Pete • 3 hours ago
Hey Pete, good question. We're putting together a kit that will allow all Xmax V3 Pro users to upgrade their vape to the POTV Xmax V3 Pro. Eta is between 30 to 45 days out.
Take care,
Mike
Well, in about 45 days we will be getting real close to Black Friday! Arrrggghhh....where is the time going!?
Seems like then would be good timing to launch the POTV XMAX V3 PRO accessory upgrade, no? With a hefty BF discount of course!
And I agree with the earlier poster who mentioned that POTV is a great vape retailer...OUTSTANDING customer service has been my experience with them! That's based on around $700 worth of purchases with them over the past couple years or so!
POTV staff is always immediately available to answer questions and offer advice to enhance one's vaping experience! And let's not forget those POTV FREEBIES!
Can't go wrong with POTV is my thinking!
...
Petetbay
Well-Known Member
I don’t know of Euro Zone online retailers that do these type of imports. POTV doesn’t export to Europe. They have a POTV retailer in Canada and Sneaky Pete Canada does import the POTV One. UK retailers https://vapefiend.co.uk/ and https://recommendedvapesupplies.co.uk/ do a lot of accessory importing and contacting them to try import POTV accessories might be a possibility or a good Euro Zone online retailer you know of.
kokolokokolokon
Well-Known Member
After try the official v3pro capsules and comparing them to the fury2 capsules i have to say the official are better.
I think it is because of the top/botton form factor. The fury 2 capsules have a “metal ring” in top and bottom…and maybe it retains heat on it.
Both retain heat but the official one distribute it along the capsule in a better way and seems to have a better airflow, getting an even abv in a easier way and more hits per capsule
I think it is because of the top/botton form factor. The fury 2 capsules have a “metal ring” in top and bottom…and maybe it retains heat on it.
Both retain heat but the official one distribute it along the capsule in a better way and seems to have a better airflow, getting an even abv in a easier way and more hits per capsule