Multi-brand Xmax V3Pro vaporizer, convection, on-demand&session.

[StonerSloth]

Thanks. I did put the magnets back into the mouthpiece the correct way, but when you put the mouthpiece on the vape now and then go to remove it, the magnets stay on the vape instead of on the mouthpiece...

 

[Robert-in-YEG]

I just got my V3 the other day. I haven't even used it yet and the magnets have already fallen off the mouthpiece. Does anyone know if there is a fix for this besides getting a new mouthpiece from the vendor/manufacturer or superglue (which I'm not doing....)

This is a really disappointing start for what seems to be an exciting new device!

Thanks in advance!

The magnets slipped out of mine as well, and it is less than 3 days old. How to secure them to the base, is yet to be discovered. However, 'krazy-glue' creates toxic fumes; that won't work.

Anyone have any ideas?

Robert-in-YEG

"Problem-solving, inventing, hacking and coding is more of an adrenaline rush of endorphins rather than a feeling."
~ Walter O'Brien

 

[Bad Dog]

I haven't even used it yet and the magnets have already fallen off the mouthpiece. Does anyone know if there is a fix for this besides getting a new mouthpiece from the vendor/manufacturer or superglue (which I'm not doing....)

sorry for your problems. I don't know any safe glues to use, maybe someone else will chime in. along with the magnet try sliding in a piece of paper along with the magnet to increase the width, might help jam it into place with friction. other than that I would contact the vender

 

[Cheebsy]

^^ this! (Damn you bad dog! I was just typing the same thing lol)

But i would also ask for a return as well.

 

[Bad Dog]

I've MacGyver'ed many things together over the years @Cheebsy

 

[Robert-in-YEG]

I was just outside having a puff on the V3 Pro, and it worked fine in our Edmonton weather.

Weather Edmonton - meteoblue

Today's and tonight's professional weather forecast for Edmonton. Precipitation radar, HD satellite images, and current weather warnings, hourly temperature, chance of rain, and sunshine hours.

www.meteoblue.com

Just to make sure, I had a second puff on the Starry v3. Of the two, the Starry is a better hand warmer.

Robert-in-YEG

"I have come to regard November as the older, harder man's October. I appreciate the early darkness and cooler temperatures. It puts my mind in a different place than October. It is a month for a quieter, slightly more subdued celebration of summer's death as winter tightens its grip."
~ Henry Rollins

 

[Tellus]

I got my V3 today, ordered with Fury capsules thanks to the advice here. Looking forward to using it.
Btw, I can recommend Vapefully.com for anyone in Europe. Fast delivery, ordered last friday, sent out monday, received today next friday (not in the same country), they are also very helpful. Was in contact with them through mail, helpful and responsive, and the title of their customer support - “Customer happiness specialist”!

 

[JamesTiberiousKirk]

I'm in the middle of changing addresses, but this looks like a vape that ticks many boxes (a vLeaf Go with replaceable 18650!). Gonna grab one once I can.

What? Do I need another vape? What an absurd question.

 

[Shit Snacks]

Well this (from here) is quite nice with water turns out, never thought I would be using the 10mm tip of this Fury 2 WPA, but until I get an adapter its pretty perfect for my V3pro!

 

[Bad Dog]

View attachment 14281
Well this (from here) is quite nice with water turns out, never thought I would be using the 10mm tip of this Fury 2 WPA, but until I get an adapter its pretty perfect for my V3pro!

high class meets budget friendly? oh the decadence ! oh the value! love that wale...... but could you imagine if it was purple, fumed with neon orange ????

 

[LesPlenty]

it repelled itself open.

50/50 chance and like what would happen to me, you did not win.

get a stream of ground bud pouring out and fill to full

This is how I pack with the OG mouthpiece...sprinkle fill as I call it.
I have been experimenting with the glass tube mouthpiece and found with the extra airflow of this mouthpiece that I can load more bud with a slight tamp and get even bigger hits...the heater keeps up with hard 5 to 10 second pulls and produces much more vapor than long 20+ second 'sips'.

 

[Bad Dog]

I'm very interested in grabbing the glass mouthpiece and wpa, seems like vape parts mart is the only game in town here in Canada that carries them. anyone know if they have Black Friday discount?? usually ?? I'll probably just grab them when the tube mp is back in stock and hopefully they still have stock of the wpa ain't no way I'm getting screwed for shipping twice!

 

[Hemper]

I'm very interested in grabbing the glass mouthpiece and wpa, seems like vape parts mart is the only game in town here in Canada that carries them. anyone know if they have Black Friday discount?? usually ?? I'll probably just grab them when the tube mp is back in stock and hopefully they still have stock of the wpa ain't no way I'm getting screwed for shipping twice!

I just tried a bent honeycomb stem from a Fury 2 in the V3 Pro. Worked like a champ. I got 5-6 nice draws out of very little in session mode going 390->410->Max

 

[PPN]

Imo, On Demand should have no off-timer, just let user control it. If there is to be an on-demand mode at all. If this vape had almost-instant heat like a Hopper or a Go, the o-d would be more meaningful, as-in, "I demand it NOW!"
As it is, I'm using the sesh mode with no real complaints!

Is this something you can point to? Are you talking about wood stems from xMax or after-market?
Thanks for being so attentive to everyone here, it means a lot.

Hi, I believe it's a security feature and the V3Pro doesn't deliver the power of a Hopper (I can't say for the Go, never tested) so it can't be instant on-demand sadly. Yes I spoken of after market stems but who know... Thank you for the kinds words, this is means a lot for me!

Just enjoying a bowl of Gelato (@325) through the V3 Right now and the flavour is delicious.

Great!

yea, I realized it'll be upsidedown on my bong most of the time. so I'll probably wait for that feature, I'm surprised that they didn't include it.

I noticed your wish, maybe in a future version...

Curiosity is what keeps us young. I was curious to smoke the same Gelato through my vapes and see what difference I could find.

Hi, I think you are used to conduction based vaporizers, yes they produce easily a thicker vapour than a convection vaporizer. We tried to keep it simple but there is a learning curve, here my recommendations: fill the bowl loosely with fine grounded high quality flowers (resinous flowers will produce more vapor), set your temp, sip on the device (slow draw) for 4-6s and increase your drawing rate for the rest of the hit until full satisfaction!

im using capsules but imo the heater is not strong enough for capsules

We didn't designed it to work with capsules... but they work... like in many others vaporizers... with slightly less good performances (the counterpart of the convenience of use)

Short circuit error posted on Reddit

https://www.reddit.com/r/vaporents/comments/qric06

Yes, I'm in contact with the guy, it looks like some issues have to be adressed, QC tests improvements and magnets, like for many new units releases.

I'm finding the length of draw needed to get this going a bit of a headache.. I wish it had more airflow

This is need more power than the V3Pro can deliver, we set the airflow in order to match the heater power.

Screen flip would be a nice addition, but I don't think it worth it to be automatic, though. It'll require hardware support that will raise the price of the unit.

Exactly! Although maybe for a future next version...

Whether it’s a desirable feature or not, many of my CHEAP ECig mods have screen flip and are firmware update able. A lot of these flower & oil vape manufactors are seemingly years behind on including such features.

Understood,, thank you I consider your opinions.

Sip n rip is what I call it.

On every pull but more so on the very first, I sip it for a few seconds just a few times, slow 2-3 sips and my mouth can sense the heat build up along with the flavor, just a few times is all that's needed and then a long hard pull anywhere between 8-12 seconds and I get almost uncontainable hits and I've been referred to as a freight train back in the day. This little thing has wrecked me to tears.

Exactly my usage style, thank you for sharing!

I think it's a conscious design decision to keep things simple, and I wholly appreciate that in this case. My wife appreciates it a lot more.
KISS principle!
I've had RBT Splinters and stuff on box mods and have been intimidated by the learning curve a good deal of the time-- and I'm mechanically inclined!
They'll incrementally tweak the important things and settings in-house.

What I would like to see, more correctly feel, would be Braile like dots to identify the main button, and the temperature. Sometimes I vape in the dark, and without tactile controls, I often struggle to find the buttons.

The other thing with the v3 that could be improved is durability. The older Starry 3 is built like a tank; it can go in my pocket without worry. The V3 Pro is NOT very robust; it feels like plastic or very thin metal.

Hi, I had the same thoughts when I received my first V3Pro until I mastered it and appreciated the performances, it's designed to be pretty affordable this is means we had to take some compromises, maybe a future version will adress the issues you mentionned, I notice them for the team!

I'm in agreement; the V3 Pro is close, but no cigar.

Please, give a look at my previous reply to you in this post.

I just got my V3 the other day. I haven't even used it yet and the magnets have already fallen off the mouthpiece. Does anyone know if there is a fix for this besides getting a new mouthpiece from the vendor/manufacturer or superglue (which I'm not doing....)

This is a really disappointing start for what seems to be an exciting new device!

Thanks in advance!

Sorry for the issue, you can get the support you desserve to get for a replacement mouthpiece, contact me by dm if needed.

Be mindful that the magnets must go back in the same way round they came out (don't reverse the polarity!)
The magnet on the lid of my Fog came out and I pushed it back in again only to find that instead of the lid pulling itself shut, it repelled itself open. I couldn't get the magnet back out to reverse it so I had to take the unit apart to reverse the magnet inside the body of the unit instead.
Sorry if it's obvious, but it can happen!

Yes, I did that mistake by the past and my Fog remained to be unusuable... until I removed the attached top lid and used it with a stem stuck in the bowl

The magnets slipped out of mine as well, and it is less than 3 days old. How to secure them to the base, is yet to be discovered. However, 'krazy-glue' creates toxic fumes; that won't work.

You can try to fix your magnets but, please, ask for the support you desserve to get, contact me by dm if needed!

I was just outside having a puff on the V3 Pro, and it worked fine in our Edmonton weather.

Good to know!

I got my V3 today, ordered with Fury capsules thanks to the advice here. Looking forward to using it.

Great, please share your opinion here or on our Reddit homepage here: r/XmaxVape I'm also the Mod of this subreddit, have fun... everybody!

 

[Antrim50]

Yesterday I had a few comparison sessions between this vape and others. one thing I notice it does well, imho, is preservation of flavour. At 220c with other vapes I get generic roasted taste that's not particularly nice. the v3 pro does much better on that front. I get a much better flavour throughout until it's spent.

If as topgreen says a version came out with a more powerful heater and they could change the flute form.. I would gladly pay double..

 

[Robert-in-YEG]

I had the same thoughts when I received my first V3Pro until I mastered it and appreciated the performances

Last night I tried something different. Instead of grinding the herb, I broke it into small pieces and packed it in the V3 Pro. That, along with "puffing' on the vape created more vapor.

After some thought, weighing out flavour and performance, this vape does have its time and place. Instead of 'chasing the dragon', seeking just the psychoactive effects, I had to remind myself again about the ritual. The V3 Pro gives nice flavour. I will spend some time appreciating that.

Robert-in-YEG

"The happiness of your life depends upon the quality of your thoughts: therefore, guard accordingly, and take care that you entertain no notions unsuitable to virtue and reasonable nature."
~Marcus Aurelius

 

[thunderstealer1337]

I got my V3 today, ordered with Fury capsules thanks to the advice here. Looking forward to using it.
Btw, I can recommend Vapefully.com for anyone in Europe. Fast delivery, ordered last friday, sent out monday, received today next friday (not in the same country), they are also very helpful. Was in contact with them through mail, helpful and responsive, and the title of their customer support - “Customer happiness specialist”!
View attachment 14278

Read my comments in this thread about capsules - they aren't good for this unit imo (other then clean, it reduces performance severely at least on my unit). Try no capsules and with capsules at same temp and you will see a huge difference

 

[Robert-in-YEG]

Try no capsules and with capsules at same temp and you will see a huge difference

I started with using milled flower in in my V3 Pro. I've now switched to breaking the bud into pieces or putting small nugs directly in the chamber.

This is vape is new and still lots to discover.

Robert-in-YEG

"Focus on the journey, not the destination. Joy is found not in finishing an activity but in doing it."
~ Greg Anderson

 

[DataRocks]

We are planning to use a stainless steel built in scraper for the optionnal glass mouthpiece, stay tuned!

Heating element is a Kanthal (FeCrAl) wire.

I don't want to say something false so I'll ask to the engineers before to reply, see you later!

Was the material posted? Thanks!

 

[Old_muel]

Anyone got a pic of the innards of the new mouthpieces?

 

[vapviking]

Anyone got a pic of the innards of the new mouthpieces?

These?

Multi-brand - Xmax V3Pro vaporizer, convection, on-demand&session.

With everything posted in this forum, I jumped on the bandwagon and picked up a v3 Pro. As I'm having my first vape, the first thing that struck out, was its ease of draw. It's brand new, no clogged filters or screens, so easy to draw might be part just 'newness'. Once I have a few more vapes...

fuckcombustion.com

My question is where can I get them? (in US or Canada, preferably)

 

[Robert-in-YEG]

River City Vapes in Edmonton has the V3 Pro in stock; that is where I purchased mine.

Edmonton Vape Shop | River City Vapes - Login

River City Vapes has won the Best of Edmonton 2019, 2018 & 2017 reader poll in the Vape Shop category, confirming that we are your trusted source for Vape, E-Cig, Mod & E-Liquid. With 3 Edmonton locations, you won't need to ask yourself if there is a vape shop near me?!

www.rivercityvapes.com

I hope Topgreen/XVape are watching this thread.

The V3 Pro is pretty good, but it needs a better top/mouthpiece. The magnets aren't very strong, the top is loose fitting and needs some minor tweaks. The fix shouldn't be complicated; use stronger magnets, and make sure that they don't pull out.

Robert-in-YEG

 

[Bad Dog]

river city vapes coupon code RCV10 for $10 off

 

[StringTheorista]

VPM.com (Canada) has the V3, the glass mouthpieces, and included a silicone WPA in my order for free.
Also, it seems like POTV is expecting them by Black Friday, they are listed on their Black Friday specials page as coming soon, 20% off

 

[Bad Dog]

couldn't swallow the extra expense of VPM and no free shipping???? they will get my business for the glass mouthpiece and wpa