Thanks for responding. I have a 5 year old Mighty OG and I have probably replaced that screen 3 times. Probably 70/30 native use to capsules. Always a medium grind currently with BCG. I have just never had that bottom screen be a problem and surprised early Venty feedback seems to indicate it might be a bit of a problem?
Venty by Storz & Bickel
- Thread starter Jill NYC
- Start date
Thunderbelch
Well-Known Member
I did: https://fuckcombustion.com/threads/venty-by-storz-bickel.54534/post-1758875
It bugged me from the start so I softened the edge of the CU of my original Venty with a diamond file. Did the same with the new one as soon as it arrived. Just went over the sharp edge very lightly all round so you barely see a change, but it feels so much nicer in the hand.LITTLE COMFORT MOD:
Some members here may be familiar with my device preferences over the years. As a fan of “miniaturization”, I have usually sought out the smallest devices. I bought the Venty, mostly because of the latest 130w. heater technology, and adjustable airflow, which all the reviews confirmed. I wasn’t sure if I would like a LARGER device, and I never liked using my Mighty, because of how it felt to hold in the hand. Perhaps, as most of my vape devices are so small, I SURPRISED myself, in that I really LIKE how the Venty feels in use, in my hand. Like picking up a small “power tool”. I actually like it!
One tiny issue I didn’t like, is the SHARP EDGE around the bottom of the CU=COOLING UNIT. I figure S&B went with the design choice of matching the FIN LINES of the body, or didn’t want to add an additional process in the manufacturing process, so they didn’t SMOOTH the bottom CU EDGES. I can FEEL these sharp edges while holding it. Nothing major, just a bit off…..
So, no big deal to do a LITTLE COMFORT MOD:
Starting with 220A, then 400A EMORY PAPER, I sanded down the CU BOTTOM EDGES. Using the coarse Emory then the finer one, at a 45 degree angle. Took a few minutes, no visible difference when done. But much BETTER feel in my hand now.
Just thought I’d share this, in case this bothered anyone, like me!
SolidAirrr
Well-Known Member
Nice, how did you disconnect the battery pack? Just by a pcb 'plug', like it looks eg on the display?
And how are the batteries connected in that pack? Do you have any more pics you could share?
And how are the batteries connected in that pack? Do you have any more pics you could share?
JoeMama
Well-Known Member
I don't see a problem, but apparently some have had a bad time getting the screen out... Not sure why that screen would need to be cleaned on a new product. I've read all these posts and seen the YT video on taking it out, but I have no desire to actually try and take my screen out for the hell of it.
vapviking
Old & In the Way
It's only been talked about as a dirty screen by I think one user, at least here in this thread. A couple of other folks have tried, on their bricked devices, to remove the screen and have been frustrated by the process.
Unless its discussed elsewhere? It doesn't seem to be a rash of screen issues...
MonkeyTime
Well-Known Member
Only one here one FC talking about it and they mentioned using the pad. Makes me think it's was a dirty concentrate attempt.
Nothing to see here folks, move along, move along
Good! Thanks!Only one here one FC talking about it and they mentioned using the pad. Makes me think it's was a dirty concentrate attempt.
Nothing to see here folks, move along, move along
ChooChooCharlie
Well-Known Member
Another addition to the vape drawer of bits and bobs -- use in the unlikely event of a Venty oven screen replacement
ChooChooCharlie
Well-Known Member
You mean I didn't need that Ifixit tool?
It was cheap, and don't have those pointy tweezers anyway
It was cheap, and don't have those pointy tweezers anyway
Dr. G
***Old Resident*** Vapman Collector
Thanks for posting. I have no desire in doing that...I guess if the day comes. I will.
RustyOldNail
SEARCH for the treasure...
Might come in handy, I have one in my Amazon cart, most of my electronic tools like that are plastic. A nice metal THIN edge tool, is worth having! That S&B video must be new, guess they are catching up with customers feedback. Hopefully, they will ADD “vibration” warning, when the 90 second BOOST temp runs out….
JoeMama
Well-Known Member
Is anyone who is using the Titanium capsules noticing a fitment issue after some use?
I am seeing lids not holding well to the capsule, like if you turn it upside down it comes off; and repeatedly replacing the lid provides near zero "catch".
I've swapped out different lids with a 50% success rate, then thinking some lids may fit better with other capsules... Oy.
It's just that I paid a lot of money for 2 sets of 5 caps... I wonder if I'm not alone.
I am seeing lids not holding well to the capsule, like if you turn it upside down it comes off; and repeatedly replacing the lid provides near zero "catch".
I've swapped out different lids with a 50% success rate, then thinking some lids may fit better with other capsules... Oy.
It's just that I paid a lot of money for 2 sets of 5 caps... I wonder if I'm not alone.
RustyOldNail
SEARCH for the treasure...
Is anyone who is using the Titanium capsules noticing a fitment issue after some use?
I am seeing lids not holding well to the capsule, like if you turn it upside down it comes off; and repeatedly replacing the lid provides near zero "catch".
I've swapped out different lids with a 50% success rate, then thinking some lids may fit better with other capsules... Oy.
It's just that I paid a lot of money for 2 sets of 5 caps... I wonder if I'm not alone.
I’ve had 1 or 2 of my (10), that were a bit loose. Like you I swapped them between the others.
I’ve also pressed gently on the top of the capsule, NOT the lid. Going gently, you may have to press more then once, as the GOOD part, is they are pretty solid, didn’t take much, and the top snapped on as it should.
RustyOldNail
SEARCH for the treasure...
Thanks, RON. I was considering the same action. I believe that does help; I'm not inclined to put the pliers on it.
Yeah, I just used my fingers, didn’t need too much pressure.
Mndeadhead
Well-Known Member
just had my first bowl in my new Venty. Initial observations:
1. This thing is even uglier in person
2. A hit on setting 3 is mindblowingly open. I think it is one of those things that has to be experienced to truly understand. I neither currently have, nor have ever owned a portable vape that is this open.
3. Definitely will not be an "out and about" vape for me - its too big. Will keep my Lobo for that reason, but this will definitely be traveling with me.
4. Man this thing is ugly. I can already hear the "wtf is that" questions being queued up by my buddies who already think I am crazy.
1. This thing is even uglier in person
2. A hit on setting 3 is mindblowingly open. I think it is one of those things that has to be experienced to truly understand. I neither currently have, nor have ever owned a portable vape that is this open.
3. Definitely will not be an "out and about" vape for me - its too big. Will keep my Lobo for that reason, but this will definitely be traveling with me.
4. Man this thing is ugly. I can already hear the "wtf is that" questions being queued up by my buddies who already think I am crazy.
Dr. G
***Old Resident*** Vapman Collector
I thought it was just me...yes, the lids get stuck but, I guess its no big deal.
crownroyaldaddy
Well-Known Member
Still enjoying my Venty. I am going to sell most of my other vapes
goldfinger
Well-Known Member
Does anyone have a decent Canadian source? I'm interested in this but would like to get it domestically and after the issues have been ironed out.
JoeMama
Well-Known Member
I don't know of a Canadian source, but I can say that if S&B's customer service is an indication of how well they fixed the issue, there no longer is an issue.
I had the irritating experience of having had my replacement unit faulty (bluetooth connectivity). I RMA'd it on Day One and got a new unit exactly 6 days later. That's just stellar IMO.
martinstraka8282
Well-Known Member
I don't know about this vape specifically, but I've had nothing but good experiences with all 3 places below numerous times. Free super fast shipping, price matching and almost immediate CS responses.
Planetofthevapes
TheHerbCafe
vapenorth.ca
Dr. G
***Old Resident*** Vapman Collector
I remember watching a Troy and Jerry show where Troy made a remark about the paint of the Venty emblem on the Venty fading. The paint was just coming off. Well, this is happening to mine. I use alcohol to sanitize because so many people are handling it...I believe that might be the cause...bad paint job. I suppose. The bottom still reads Venty but, in a cream color.
SolidAirrr
Well-Known Member
From the picture I saw, I really liked the faded name tag
Petetbay
Well-Known Member
POTV is probably your best bet, they were displaying a 20% off S&B discount before, but that notice is gone now on both US and Canadian sites. Probably not going to land until the new year. Canadian Vaporizers does some good discounts. https://www.canadianvaporizers.ca/