Discontinued Vapolution 3.0

Vapolution Vaporizers

Vapolution Vaporizers
Manufacturer
Hey everyone. Its true, we are working on the Vapolution 3.0 and we did merge with Mcig. We hope to see the 3.0 come to fruition in the next handful of months.
As for the website listed above, we have no affiliation with.
Now on to rekrab... Give us a shout and let us know your address, we will see what we can do for you.

Update to OP 1/16/16:
Vapolution has been making desktop vaporizers with an all glass vapor path since 2000. We pride ourselves on having the best tasting vapor and the best customer service in the industry.

Our latest device, the Vapolution 3 ( AKA VAP3 ) was released right before Christmas.



VAP3 is a microprocessor controlled heating device with an all glass vapor path. Temperature feedback is provided by a rugged industrial temperature sensor. Every VAP3 heater is made in Chico, CA from raw materials that are 100% USA sourced. The temperature range is 212 - 452 °F (100 - 233 °C). VAP3 will warm up from room temperature in less than 2 minutes.

The Glass Heater Sleeve is removable, so cleaning or replacing it is very easy. The heating area is 25% larger in diameter and 50% larger in area when compared to the Vapolution 2. This means bigger hits, better airflow and larger loads.



Here is a short video highlighting the features of VAP3:


VAP3 is available with a Hydrotube as seen here:


Infuse your herbs with the VAP3 Infuser:


Get tasty dab hits with our all glass dab rig:


The All-In-Wonder Bowl has been a staple in the Vapolution lineup:


Please check us out a www.vapolution.com

Download the VAP3 User Guide here.
Download the VAP3 Infuser Guide here.
Download the VAP3 Dab Guide here.

We started this thread while VAP3 was still in development. Please jump to page 14 of this thread to see posts since its release. Thank you.
 
Last edited by a moderator:

Vapolution Vaporizers

Vapolution Vaporizers
Manufacturer
Splendid. Could you quote the size of the inner tube of the heating unit?

We have not finalized the heater size yet, but it will be at least 2mm larger in diameter at a minimum.

wow, sounds great! will the price point change a lot?

Not sure of the price point yet. Will not know until the bill of materials is complete. It will still be a very affordable vaporizer compared to what else is on the market.
 
Last edited by a moderator:

Vapodudule

Well-Known Member
We have not finalized the heater size yet, but it will be at least 2mm larger in diameter at a minimum.



Not sure of the price point yet. Will not know until the bill of materials is complete. It will still be a very affordable vaporizer compared to what else is on the market.

thanks for reply

Could a 12 mm diameter tube could fit inside the vap 3.0?
 
Vapodudule,

paytonpenn

Level 30 Nature/Healer
Will it say Vapolution on it in contrasting colors to ensure people know what it is. It would be nice to have it more discreet in that aspect.

Looking forward to get one.
 
paytonpenn,
  • Like
Reactions: ataxian

Vapolution Vaporizers

Vapolution Vaporizers
Manufacturer
Can't wait to see the 3.0! A larger diameter bowl is definitely one of my most desired upgrades along with the smaller size so that's great to hear - if we have can have all-glass with better airflow then you can consider one already bought.

I got a 2.0 after trading away my original Vapolution for a bicycle many years ago. Thank you to the generous forum member who made that happen. Once again I'm very impressed by the vapor quality, and really enjoy the cost-to-flavor and effectiveness ratio that the Vapolution offers. I've been using it with vertically oriented pieces with a homemade gong bowl I had from before - I need to get in and make shorter ones. With this setup I can share an all glass vapor path with friends in a comfortable hookah setting, and if someone blows absentmindedly, at least they didn't just destroy an expensive Vape Exhale Cloud. This might look slightly ungainly, but the Vapolution is so light it's kind of surreal the first time you pick one up. Vapor density with this setup using a properly packed bowl is really quite excellent. Works great with a hyrdratube as well.


Nice custom setup. Impressive.

I will not buy another vaporize until I get a VAP3.0. You can have your big over sized belt buckle or lift kit on a 4x4 in the city.

Just let me experience the pure flavor of well cured cannabis!

? Is the load still whole flower nuggets?

Yes. Whole nuggets. No metal screens. All glass vapor path.

Made some quick aiwb-style oil bowls. Works great.


I like the bent oil bowl. How do you get oil into that one? Through the hole?

Just your nice new logo against black would look great.

Really looking forward to this vape!

Tom. Great idea. I will put it in my design criteria for the chassis. Thank you.
 

nofrills

New Member
Nice custom setup. Impressive.



Yes. Whole nuggets. No metal screens. All glass vapor path.



I like the bent oil bowl. How do you get oil into that one? Through the hole?



Tom. Great idea. I will put it in my design criteria for the chassis. Thank you.

Hi two questions for you:

Do you have a timeframe on 3.0 ? like months ? 2014 ?

and 2nd:

Will your existing accessories be compatible with 3.0 ?
 

Vapolution Vaporizers

Vapolution Vaporizers
Manufacturer
Hi two questions for you:

Do you have a timeframe on 3.0 ? like months ? 2014 ?

and 2nd:

Will your existing accessories be compatible with 3.0 ?

Hopefully before the end of 2014. Yes they will work, but the VAP3 will have larger diameter accessories.

What is the efficiency like for the oil attachment , compared to say the enano? The price tag is so low for this vape I might get it just to use with oils.


I would say it is extremely efficient. I've never used the enano, so I cannot compare. A tiny dab nets me double digit vapor hits. You can see it in action here:

 

axakal

Well-Known Member
@Vapolution Vaporizers i'm sitting on a broken v1.0 and everytime i thought, i got the cash for the v2.0 replacement unit and new accessoires, the money was needed elsewhere. now, with the good news on the v3.0 coming out, i see no point for myself to go for the v2.0. since i'll not be needing two vapolution units, i would only go for the newer model. even if it means to wait a couple of months. :) will you offer a similar upgrade from a broken v1.0 to v3.0, as you did for the v2.0? thanks
 
Last edited:

Vapolution Vaporizers

Vapolution Vaporizers
Manufacturer
@Vapolution Vaporizers i'm sitting on a broken v1.0 and everytime i thought, i got the cash for the v2.0 replacement unit and new accessoires, the money was needed elsewhere. now, with the good news on the v3.0 coming out, i see no point for myself to go for the v2.0. since i'll not be needing two vapolution units, i would only go for the newer model. even if it means to wait a couple of months. :) will you offer a similar upgrade from a broken v1.0 to v3.0, as you did for the v2.0? thanks

VAP3 will hopefully be released by the end of 2014. There will be an upgrade program, but I do not know if it will apply to the 1.0. The 2.0 definitely. The VAP3 will not be compatible with the 2.0 or 1.0. It will need all new power adapters and accessories, so the upgrade formula will have to change accordingly.
 
Top Bottom