Vapman

[Jess]

If I were to begin by having a single toke(with appropriate heating cycle), how long could I leave the unspent remainder of the dose inside of the vapman before I would have to replace it wish a fresh piece? i.e. can I have a second hit after 2hrs or 6 hrs or even a day later and it would still be good to hit? Whats the shelf-life of a part spent round in the chamber?

Welcome! If the Charas is sticky, be careful if you leave it for a while and try to open it. There have been some where the filter sticks to the bowl and some have ripped the bowl off. So I would just remove it while hot. It’s an amazing device and treated well will last a lifetime.

 

[T9R]

If I were to begin by having a single toke(with appropriate heating cycle), how long could I leave the unspent remainder of the dose inside of the vapman before I would have to replace it wish a fresh piece? i.e. can I have a second hit after 2hrs or 6 hrs or even a day later and it would still be good to hit? Whats the shelf-life of a part spent round in the chamber?

Just wanted to add that you can use extremely small amounts of hash (or herb) with the Vapman. So if the dose is your concern I would recommend simply lowering it and still do whole bowls, instead of adjusting the amount of hits you take.

IMO it's a much better experience than doing the equivalent of picking up roaches from the ashtray, especially since Vapman is a fantastic session vape.

 

[coolbreeze]

picking up roaches from the ashtray

Lol. When I go visit home I stay with a buddy who still has my Malibu bottle half-filled with petrified roaches from the 80s. ; D

 

[nicknobody]

The Rogue Wax Works mouthpiece/wpa in cocobolo has arrived! It’s incredibly beautiful. Even more so than the picture hinted at. Craftsmanship is spot on. It’s perfect. I love how it’s fully lined. A bonus was an included intercooler. Unfortunately on my Italian OG it fits in the mid section no problem but it blocks the center hole on the screen not allowing it to mate with the post when attaching to the main body. No problem, just trim the mouthpiece condenser to allow a little play. I most likely won’t use the intercooler with the vm so no concern for me. The mp doesn’t fit my click without removing the metal lined pieces of the mid section. I haven’t actually used it like this yet.

Overall I love it and I wish I bought two

Need to test more. Cool hits and still tasty. Only used in my olive v1 so far.

Edit for pics:

new rogue dabber too

 

[coolbreeze]

The Rogue Wax Works mouthpiece/wpa in cocobolo has arrived! It’s incredibly beautiful. Even more so than the picture hinted at. Craftsmanship is spot on. It’s perfect. I love how it’s fully lined. A bonus was an included intercooler. Unfortunately on my Italian OG it fits in the mid section no problem but it blocks the center hole on the screen not allowing it to mate with the post when attaching to the main body. No problem, just trim the mouthpiece condenser to allow a little play. I most likely won’t use the intercooler with the vm so no concern for me. The mp doesn’t fit my click without removing the metal lined pieces of the mid section. I haven’t actually used it like this yet.

Overall I love it and I wish I bought two

Need to test more. Cool hits and still tasty. Only used in my olive v1 so far.

Edit for pics:

new rogue dabber too

Awesome! : )

 

[Dr. G]

The Rogue Wax Works mouthpiece/wpa in cocobolo has arrived! It’s incredibly beautiful. Even more so than the picture hinted at. Craftsmanship is spot on. It’s perfect. I love how it’s fully lined. A bonus was an included intercooler. Unfortunately on my Italian OG it fits in the mid section no problem but it blocks the center hole on the screen not allowing it to mate with the post when attaching to the main body. No problem, just trim the mouthpiece condenser to allow a little play. I most likely won’t use the intercooler with the vm so no concern for me. The mp doesn’t fit my click without removing the metal lined pieces of the mid section. I haven’t actually used it like this yet.

Overall I love it and I wish I bought two

Need to test more. Cool hits and still tasty. Only used in my olive v1 so far.

Edit for pics:

new rogue dabber too

WOWOWOWOWOOWOWOWOWOWO!!!!!!!!!!!!!! SCORE!!!!!!!!!!!!!!!!!!! That is so very beautiful!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

ENJOY ENJOY ENJOY ENJOY!!!!!!!!!!!!!

 

[kuala_chaz]

Will the RWW mouthpieces fit just as well with 2.0 and click versions?

 

[nicknobody]

Will the RWW mouthpieces fit just as well with 2.0 and click versions?

It doesn’t work with my click imo

Do you have a click? Remove the spacer/liner from your mid section and re install the screen. That’s the only way it fits and it’s not “usable” to me. Needs some sort of spacer without the liner to fill the gap left behind

No clue on a v2

 

[kuala_chaz]

I have a 2.0 on the way, and a click feels inevitable - good to know though

 

[coolbreeze]

No clue on a v2

It will be the same midsection, it's got the liner too. V1 midsections will also fit and don't have the liner/gap.

 

[Dr. G]

Will the RWW mouthpieces fit just as well with 2.0 and click versions?

No


Here are a few of our Vapman Rogue Collection that we are so very proud of...we have other Rogue mp for Vapman and TM1 and 2...we are HUGE fans. All of these get used weekly...



If you are in the market for a wooden or acrylic Vapman stem...this is the place.

PS I also love the EDSTNT Vapman stems...he has two of them...a black or cocobolo that are superb...

 

[Robthebob]

Does anyone have experience with the yew in combination with a jet lighter? Does the middle piece discolor a lot or is it better to just use the station?

 

[Dr. G]

Does anyone have experience with the yew in combination with a jet lighter? Does the middle piece discolor a lot or is it better to just use the station?

...if you are able to use the Station it causes less damage or no damage at all. When I use a torch, you get the discoloration happening. The YEW is too beautiful to mess it up. My humble opinion....but, listen...if you don't have a Station and you want to enjoy your life...take the torch, and go for it. just enjoy it while it lasts...nothing lasts forever anyway.

 

[Robthebob]

true words

 

[-green-]

Has anyone ever used 'tung oil' for the maintenance of wood vaporisers?

 

[passenger]

Has anyone ever used 'tung oil' for the maintenance of wood vaporisers?

Normally tung oil has a distinct odor that might affect the taste. Also think about that everything in the middle piece might sweat out and could vaporise if it gets into the pan.

 

[-green-]

could vaporise

Tung oil polymerises in a similar way to linseed oil.

 

[whatscooking]

The concentrate screen defently changes the overall performance of my Click. Still happily learning by trial and error reading and watching viedos. Believe I saw David mention to use A screen even with dry herbs, love the way he says that. Seems to really help to get air moving around underneath the load, flavor for longer and makes it harder to burn to black.
Ow well back to experminting.

 

[fangorn]

The concentrate screen defently changes the overall performance of my Click. Still happily learning by trial and error reading and watching viedos. Believe I saw David mention to use A screen even with dry herbs, love the way he says that. Seems to really help to get air moving around underneath the load, flavor for longer and makes it harder to burn to black.
Ow well back to experminting.

for hash, I exclusively use a Vapman OG.
I use the screen. I like to make a bowl of flowers after a bowl of hash, to "clean" the grid.

but with the screen, we lose conduction and gain convection... it changes the Vapman experience in my experience.

I would really like to try "pure" conduction with my hash... but in the long term, it would be too hard to maintain (without the screen therefore)

just a thought on the conduction / convection balance ....