goatgobaahh
Well-Known Member
PLEASE LET ME BUY SOME QNAILS PLEASE PLEASE PLEASE!
I just don't know how you can ALWAYS be sold out of the same product.
I just don't know how you can ALWAYS be sold out of the same product.
Discontinued VapeXhale Cloud EVO
- Thread starter stonemonkey55
- Start date
SamuraiSam
Extraction Technician
They are working hard on it. Sometimes good things take time...
goatgobaahh
Well-Known Member
$100 Qnail isn't exactly what I would call a good thing.
Accessories should be in stock period. If they aren't allow third party people to make them simple as that.
When are we going to get OGB or another blower to start making these qnails for us?
Accessories should be in stock period. If they aren't allow third party people to make them simple as that.
When are we going to get OGB or another blower to start making these qnails for us?
Vapor King
Well-Known Member
I bet if you ask nicely...they will make you a quartz one
http://www.brotherswithglass.com/Grav-Labs-Oil-Attachment-for-VapeXhale-Cloud-EVO-p/bwg-glvxdb.htm
eventhorizon
New Member
maybe using you-tube wasn't for an example wasn't the best idea, when I was talking about expecting
"big hits" I meant something like this..but I guess this image would also be pretty easy to fake
"big hits" I meant something like this..but I guess this image would also be pretty easy to fake
Cannabis Connoisseur
I LOVE LIFE
Easy to fake? More like easy to make!! I fill my screens one quarter full and milk pieces just like this. Certain pieces won't milk up Its just the nature of science to that piece. Too many variables involved to milk them like this everytime. For my combustion buddies who don't know the difference between shitty quality smoke and high quality vapor, I always cut the EVO to max on them with herb. They're used to clouds so i give them to them and no matter what herb(different pieces may vary) i always get these white wallsmaybe using you-tube wasn't for an example wasn't the best idea, when I was talking about expecting
"big hits" I meant something like this..but I guess this image would also be pretty easy to fake
Vapor King
Well-Known Member
1. turn machine up all the way and leave it there until you figure out how it works...you can adjust later
2. pack .05-.08 into ELB....until you figure out how it works...you can adjust later
3. Wait appx 30 minutes ( heat soak).....until you figure out how it works...Then you will just know when its ready
4. drop ELB in unit towards the end of the heat soak
5. Draw a little air through... just to get the material warmed up and let it sit for a sec
6. Now start pulling and ramping up the draw speed.... once you start to see vapor.... pull as hard as you want.
You should now have a tube filled with pretty thick taste vapor... like the picture you posted.
2. pack .05-.08 into ELB....until you figure out how it works...you can adjust later
3. Wait appx 30 minutes ( heat soak).....until you figure out how it works...Then you will just know when its ready
4. drop ELB in unit towards the end of the heat soak
5. Draw a little air through... just to get the material warmed up and let it sit for a sec
6. Now start pulling and ramping up the draw speed.... once you start to see vapor.... pull as hard as you want.
You should now have a tube filled with pretty thick taste vapor... like the picture you posted.
Poostuff
Please delete
I've always had great results using Vapexhale products & I don't think it's fair to tell people a light vapor output is okay with the Evo as long as you can still feel the results. It's nice to have that option but large dense clouds of vapor were pretty much the selling point of the first model, it's what the company has become known for & it's what a lot of people expect when they make the purchase. It's why I bought one & why I can understand people being disappointed & maybe even confused if they're using quality product & not exhaling those fat clouds when clearly other people are.
Some buy on a whim but most people do their research when buying high end vapes & have certain expectations.
Mine delivers dense satisfying vapor that you don't need to shine a light on to see, if it didn't I'd work with it for a couple of weeks & if nothing changed definitely get it checked.
Mine runs hot, in fact so hot that if I use the heat shield it'll combust when it really shouldn't. It's not overheating, the bamboo seems airtight & if I don't use the full heat shield I can find the sweet spot & it works unbelievably fucking well. So I can't really call that a problem but if it becomes one I'd just send it in. No one wants to have to do that but faults happen with electronic devices & more often than not if you have a genuine problem or fault with a vape & you buy through a good vendor they will look after you.
Some buy on a whim but most people do their research when buying high end vapes & have certain expectations.
Mine delivers dense satisfying vapor that you don't need to shine a light on to see, if it didn't I'd work with it for a couple of weeks & if nothing changed definitely get it checked.
Mine runs hot, in fact so hot that if I use the heat shield it'll combust when it really shouldn't. It's not overheating, the bamboo seems airtight & if I don't use the full heat shield I can find the sweet spot & it works unbelievably fucking well. So I can't really call that a problem but if it becomes one I'd just send it in. No one wants to have to do that but faults happen with electronic devices & more often than not if you have a genuine problem or fault with a vape & you buy through a good vendor they will look after you.
A1FBG
Active Member
That milked bong was probably used with the Evo on full temp. But I'm not a fan of the taste at that temp.. I'd rather have a nice medium sized vapor cloud that taste better. Also know the strain type, potency, dryness, heat soak time length, and more can cause differences in the vapor cloud production you recieve
Edit: my dumbass just noticed his temp is on noon.. Might just be some super strong loaded with THC
Edit: my dumbass just noticed his temp is on noon.. Might just be some super strong loaded with THC
alltoreup
Damn you, party liquor
I normally hit my replacement EVO at 12:30-1. Same output as my old colder unit was at 3:00.
I've been using my nails in the EVO a bit more recently and after cleaning a nail at max and then turning down to noon and vaping an elb of flowers I can whitewall my big ass FC-1000 with no issue. Same product at the same temp without the heat soak is not nearly as thick but still much thicker than my old unit (replaced because of a runaway heater after it was repaired once and then messed up again - great customer service both times btw)
In other words take all those videos with their temp dial settings with a grain of salt. They could have heat soaked for a long time then turned it down. It still maintains a lot of heat even after it turns green when you turn it down in temp.
I've been using my nails in the EVO a bit more recently and after cleaning a nail at max and then turning down to noon and vaping an elb of flowers I can whitewall my big ass FC-1000 with no issue. Same product at the same temp without the heat soak is not nearly as thick but still much thicker than my old unit (replaced because of a runaway heater after it was repaired once and then messed up again - great customer service both times btw)
In other words take all those videos with their temp dial settings with a grain of salt. They could have heat soaked for a long time then turned it down. It still maintains a lot of heat even after it turns green when you turn it down in temp.
passthecheese
Well-Known Member
Hey guys quick question
I've been vaping along great since I've got my Evo in Feb 14. These were going great up until last night.
I had been using strictly nails for a few months an wanted to try an elb. So I preped it and no matter what temp I set the Evo at I got combustion. At first I thought it was my fault, maybe I let it heat-sink too long, maybe my draw was too slow, ect. Then this morning I tried again from a cold Evo. I set it to 10 and super big combustion cloud again.
Now I'm a little frustrated because I have to clean my hydrotube and for the first time my bamboo smells gross. What do you think is going on here? Is it me? Also, what are the best ways to clean the bamboo? Long q-tips? The balloon method? (that one makes me a little nervous)
I've been vaping along great since I've got my Evo in Feb 14. These were going great up until last night.
I had been using strictly nails for a few months an wanted to try an elb. So I preped it and no matter what temp I set the Evo at I got combustion. At first I thought it was my fault, maybe I let it heat-sink too long, maybe my draw was too slow, ect. Then this morning I tried again from a cold Evo. I set it to 10 and super big combustion cloud again.
Now I'm a little frustrated because I have to clean my hydrotube and for the first time my bamboo smells gross. What do you think is going on here? Is it me? Also, what are the best ways to clean the bamboo? Long q-tips? The balloon method? (that one makes me a little nervous)
Cannabis Connoisseur
I LOVE LIFE
Sounds like a cracked bamboo ( glass) You should cover the end with your finger and blow in the top see if it's airtight. Wait until cold
t-dub
Vapor Sloth
@passthecheese - Sounds like a cracked bamboo.
To get consistent heavy clouds from EVO it must be heat soaked, thats why I use an outlet timer to run my EVO 24/7 so its always ready, and you must use a gentle primer hit to get heat transferred to the load. Once vapor starts being produced and your glass fills a bit you can relax, grip it, and rip it.
To get consistent heavy clouds from EVO it must be heat soaked, thats why I use an outlet timer to run my EVO 24/7 so its always ready, and you must use a gentle primer hit to get heat transferred to the load. Once vapor starts being produced and your glass fills a bit you can relax, grip it, and rip it.
Last edited:
Vapor King
Well-Known Member
I was thinking of doing the same thing. What are the intervals you use??
t-dub
Vapor Sloth
It turns off for 1 minute at the top of every hour.
Vapor King
Well-Known Member
passthecheese
Well-Known Member
Thank you @t-dub and @Cannabis Connoisseur. Welp now I'm thinking it's a cracked bamboo at this point too. I tried @Cannabis Connoisseur 's blow through method and it wasn't as tight as it probably should be. Ugh on a a Friday too hahaha.
Oh well, I wonder how / why it happened.
To those who have had to send in for repair, how long is the whole process? I've contacted support right before I made my first post.
Oh well, I wonder how / why it happened.
To those who have had to send in for repair, how long is the whole process? I've contacted support right before I made my first post.
t-dub
Vapor Sloth
I had mine back in about a week. Since the bamboo is glass it can fatigue over time.
Cannabis Connoisseur
I LOVE LIFE
Times vary due to many variables
John Lewus
Well-Known Member
I just got a promotional email from vapexhale where you refer a friend you get a free hydratube. There is also a 20% Off father's day coupon. Does anyone know if these stack? I have a friend interested in a high end Vape and I'm thinking of recommending this one. That seems like a pretty good deal to me.
oldiebutgoodie
Apostle, Church of Vaporization
So most of us have probably received the "Evolve A Friend" email offering a free HT (or $300) for anyone getting a friend to purchase an EVO Starter Kit. However . . .
when you go to the linked VXL web page, it gives you the option of receiving a Coupon with this instruction:
Note that the friend receives 10% off their entire starter kit order. So apparently, the person who gives the referral receives a free tube AND the friend receives 10% off, both. Is that how you read the promo? (Nothing is said about the 10% in the email.)
Additionally, the email and the web page both have banners at bottom advertising the Father's Day "DAD" sale of "20% off ALL orders." Certainly this doesn't mean that the friend could receive a 10% discount from the "Friend" promo PLUS the 20% discount for the "DAD" sale???
For the hell of it I emailed promo@vapexhale for clarification as stated on the web page, but the VXL web server returned a delivery error indicating that "promo" doesn't exist.
While I seriously doubt the offers can be combined (and it would only be for this week-end), if I'm wrong it could be quite a deal: 30% plus a free tube. Furthermore, while with the Friend promo the friend can get at least 10% off, why wouldn't s/he just go for the 20% off instead?
Inquiring minds want to know.
EDIT: @John Lewus , you just beat me to the punch!
when you go to the linked VXL web page, it gives you the option of receiving a Coupon with this instruction:
Note that the friend receives 10% off their entire starter kit order. So apparently, the person who gives the referral receives a free tube AND the friend receives 10% off, both. Is that how you read the promo? (Nothing is said about the 10% in the email.)
Additionally, the email and the web page both have banners at bottom advertising the Father's Day "DAD" sale of "20% off ALL orders." Certainly this doesn't mean that the friend could receive a 10% discount from the "Friend" promo PLUS the 20% discount for the "DAD" sale???
For the hell of it I emailed promo@vapexhale for clarification as stated on the web page, but the VXL web server returned a delivery error indicating that "promo" doesn't exist.
While I seriously doubt the offers can be combined (and it would only be for this week-end), if I'm wrong it could be quite a deal: 30% plus a free tube. Furthermore, while with the Friend promo the friend can get at least 10% off, why wouldn't s/he just go for the 20% off instead?
Inquiring minds want to know.
EDIT: @John Lewus , you just beat me to the punch!
Vapor King
Well-Known Member
All the answers are in the Details.....
It is impossible to use them both at the same time....BECAUSE....
This Sunday is before July....
Father's Day 20% ends Sunday
Refer a friend 10% / free HT is for the month of July
It is impossible to use them both at the same time....BECAUSE....
This Sunday is before July....
Father's Day 20% ends Sunday
Refer a friend 10% / free HT is for the month of July
oldiebutgoodie
Apostle, Church of Vaporization
