Discontinued VapeXhale Cloud EVO

[Seek]

When my unit glitches in a way the both LEDs are lit, they don't seem to alternate rapidly, they're both solid.

By the way my red-green transition also has both LEDs lit at many brief moments. Because it seems to me like a double PWM pattern.
First it's red and aproaching the temp.
Then the green start flashing in increasingly frequently while red remains lit solid. So as the green flashes, they're both on.
The green will become solid and then the red stops being solid and flashes decreasingly frequently until it's solid off.
The red flashing also doesn't turn the green off. It seems to me like both LEDs are controlled by temperature separately.
The one being lit doesn't automaticaly turn the other one off.
Also do 110V units do that cool slow PWM transition between red and green? I haven't seen a single report.
Maybe the new firmware ones?

Also if this blinking in the PWM pattern was faster it could look even cooler - the real visual PWM effect.
At high frequencies our eyes start perceiving the frequency as lightness, so it would make a smoothly fading red-green transition.


Simplified graph(there are more flashes actually)
of my transition from red to green as it approaches the temp:

Red: -------------------------------_-_-_-_-__-____-________-______
Green: _____-________-____-__-_-_-_--------------------------------
->Time
----: on
____: off

 

[turk]

.....when i 1st received my evo, I observed that although I was getting really fucked -up my abv wasn't that dark...over time this has changed (important to note I never sent it in), and my abv now is as dark as my ticker delievered...there may be a "breaking in" period where the unit "adjusts"....the temps that I'm using now are the ones I aways used so that part of the equation has remained the same....my theory is that the unit over time adjusts itself...so for all those who feel something is amiss with their units...live with the unit a little and see what happens...cheers...(I also await the arrival of my concentrate tool...).

 

[thesoloman]

Im so happy i finally get to post in this thread! my buddys coming over any minute and is bringing his evo! time for the double cloud sheshhhh! FUCK YES
edit: Whats the story with the light shows?
double edit, when changing the temperature the green light is on, with the red light flickering @stonemonkey55 or anyone who knows, is this normal?

 

[Dr. Plutonious]

I was just looking at Vapexhale's webpage (again) just for fun. Then I realized they have written the best description of all time for describing purity.

"When it comes to health, we are as serious as a Wanderlei Silva stare down. We use an all glass vapor path not because it is so durable or easy to work with, but because of how safe of a material it is. It is inert, non-reactive, and allows the full flavor and terpenes to shine through during vaporization."

@stonemonkey55 , A TRUE MMA fan through and through! My favourite vaporizer now gives one of (if not my #1) favourite fighters of all time a shout out on it's front page.

I feel this picture is now appropriate:

(MMA mode activated) WAR Wanderlei Silva and VapeXhale. I do agree, Wanderlei's aggression perhaps is the best way to represent the EVO's vapour production.

 

[oldiebutgoodie]

Im so happy i finally get to post in this thread! my buddys coming over any minute and is bringing his evo! time for the double cloud sheshhhh! FUCK YES
edit: Whats the story with the light shows?
double edit, when changing the temperature the green light is on, with the red light flickering @stonemonkey55 or anyone who knows, is this normal?

The red flickering means the unit is not quite at set temp and the green indicates the temp has been reached. The EVO and HT's have subtleties that take a little time to discover and figure out.

 

[stickstones]

I'm using my Evo all the time now. I use Herbie when I'm in a hurry, get lazy or need a vape signature switch up. It's worth the hassle of waiting for the Evo to warmup because I like the hits so much.

 

[grokit]

My evo's timer setup turns on daily, right now it comes on at 2:30am or so and shuts off around 8:30am. I frequently wake up in the middle of the night and the green glow literally guides me back to lala land lol.

 

[olivianewtonjohn]

Could anyone please tell me how the cloud evo might hit in contrast to this:

http://fuckcombustion.com/threads/herbalaire.276/page-66#post-587055

I mean seems like if I ignore the vape that might as well have been a cloud?

 

[Teedub]

haha i watched that today too and was thinking the same, I originally ignored that vape but that vid stuck it in my mind.

 

[VapeNStone]

Could anyone please tell me how the cloud evo might hit in contrast to this:

http://fuckcombustion.com/threads/herbalaire.276/page-66#post-587055

I mean seems like if I ignore the vape that might as well have been a cloud?

Look at how slow he had to hit it. I'm sure it's a cheaper solution to the EVO though but if I had to guess I would bet the heater wouldn't keep up the same.

 

[Madcap79]

The hit didn't look that slow to me?

 

[VapeNStone]

Well then that perc doesn't fire correctly. But when he pulled after he lifted the herbalaire it seemed to fire fine? So I just assumed that the minimal fire was due to pulling slowly.

 

[catfungus]

can't see the whole combo, why wouldn't you frame up everything?

probable initial combustion, you can't kill a cherry while drawing that hard

dubious

 

[Cannabis Connoisseur]

I'm still doing extensive testing in my lab, but just wanted to take the time to comment on a few things. First off I could care less about white walling the glass or dark abv. Too many variables involved to go off that crap. I have one test in my lab I challenge all to try with their EVO. Use your EVO however you use it then hold your vapor for a while and exhale now stare at anything. Are you stoned , medicated, or effected. Thats all that matters. My Girl Scout Cookies puts off thick white vapor even with the unit on 12 like its keif on 3. My Cheese puts off very tasty yet whispy looking vapor on even 3, through all the hits, but YOU DAMN SURE FEEL IT. I like the statement made about after the EVO extraction there was nothing left to extract. I could tell that by how I felt. HERES SOME VALUABLE EVO ADVICE. STOP CHASING CLOUDS AND GAUGE YOUR HIGH! There are many of us who have recognized and must respect the power of this MACHINE. For those of you with a EVO and those of you straddling the fence about getting one I just have one question. DO YOU FEEL LIKE WE DO?????
P.S I feel like with the EVO once youve gotten the realization of how stoned this thing gets you, resistance is futile you will be assimilated!

 

[oldiebutgoodie]

Could anyone please tell me how the cloud evo might hit in contrast to this:

http://fuckcombustion.com/threads/herbalaire.276/page-66#post-587055

I mean seems like if I ignore the vape that might as well have been a cloud?

Not quite sure what you're looking for here . . .

But if you mean, can you get big hits off of other vaporizers, the answer is, sure you can. Not that the hit in that vid is particularly huge. The density of my EVO hits whitewall my large-volume Mobius bubbler and Double-Swagger so thick that you cannot see the inside glass at all.

But of course, that is just one of many characteristics that make a vape what it is (or isn't). IMO the herbie is kick-ass for blowing bags, but for direct draw it's way down my list.

One thing I can say unequivocally, the EVO delivers the fastest, most totally thorough extraction of any vape I've used.

 

[MG23]

Look at how slow he had to hit it. I'm sure it's a cheaper solution to the EVO though but if I had to guess I would bet the heater wouldn't keep up the same.

I did not slow down my inhale whatsoever. The HerbalAire is simply a heavy hitter.
Neither the HA or the bubbler have much restriction, that is simply how that perc fires.
Check out the other D020-D videos for proof. It fires more on clear because of the pressure change.

And about the heater not keeping up... you clearly don't know the HerbalAire.
Throw a group of 10 at it hitting it constantly and you will not overtask the heater.

can't see the whole combo, why wouldn't you frame up everything?
probable initial combustion, you can't kill a cherry while drawing that hard
dubious

You must be joking. The HerbalAire can only go up to 400. It is impossible to combust with it.

One thing I can say unequivocally, the EVO delivers the fastest, most totally thorough extraction of any vape I've used.

Then I doubt you've used an HerbalAire.

Just because a vaporizer costs half as much does NOT mean it is half as functional.

 

[olivianewtonjohn]

Not trying to start a problem. I was genuinely asking about the potential differences. Always thought of the HA as a sipper but that video definitely reminded me of a cloud hit

 

[MG23]

Not trying to start a problem. I was genuinely asking about the potential differences. Always thought of the HA as a sipper but that video definitely reminded me of a cloud hit

That's why I responded to the posters making ignorant presumptions; not you.

 

[oldiebutgoodie]

. . . Then I doubt you've used an HerbalAire.

Just because a vaporizer costs half as much does NOT mean it is half as functional.

Matter of fact, I have. The old cliche applies, different strokes for different folks. Hence my ""

Let's not turn this into a pissing match, OK?

 

[MG23]

Never intended to argue about which vape is better or even about which is a better value.
Have you tried the HerbalAire direct through a water tube or bubbler to give a fair comparison to the Cloud products?
I always doubt the breadth of experience from those that talk down about HerbalAire's direct draw mode and insist it shines brightest in bag mode. Seems those people have usually only experienced HerbalAire's stock whip vs. stock bag blowing; not nearly its full range of versatility.

Edit for HerbalAire versatility examples: http://fuckcombustion.com/threads/herbalaire.276/page-61

 

[Roth]

I have a question for anyone with a VXNail already.

On the VXNail, how far out does the glass rim you grab stick out? Reason I ask, I'm trying to figure out if an 18mm female to whip adapter could be used with the VXNail.

I see Planet Vape has an adapter marketed towards the EVO, which is exactly what I'm looking for. It's sold out though The only other 18mm female to whip adapter I've been able to find has been the one on the eBay link.

I currently do not own a hydratube, only the standard mouthpiece. Was looking for a way to hook the VXNail up to my Mobius.

I know adding in some silicone tubing isn't the ideal thing to do with an all glass air path, just trying to give myself a few options til I acquire a hydratube.

Any help is appreciated, thanks!

 

[oldiebutgoodie]

I have a question for anyone with a VXNail already.

On the VXNail, how far out does the glass rim you grab stick out? Reason I ask, I'm trying to figure out if an 18mm female to whip adapter could be used with the VXNail.

I see Planet Vape has an adapter marketed towards the EVO, which is exactly what I'm looking for. It's sold out though The only other 18mm female to whip adapter I've been able to find has been the one on the eBay link.

I currently do not own a hydratube, only the standard mouthpiece. Was looking for a way to hook the VXNail up to my Mobius.

I know adding in some silicone tubing isn't the ideal thing to do with an all glass air path, just trying to give myself a few options til I acquire a hydratube.

Any help is appreciated, thanks!

Take a look at the 2nd pic in @S1N3's great post here:

http://fuckcombustion.com/threads/vapexhale-cloud-evo.11357/page-153#post-584733

The rim has a slightly smaller diameter than the top edge of the EVO joint, upon which it rests. The nail is grasped by the hollow "handle" that rises up from the rim. The rim and handle fit up inside the 18/19 female joint inside an HT. Consequently any female 18/19 GonG joint would presumably work, as long as there is an approx 1/2" open area just above the ground section into which the nail's protruding handle can fit. That said, I have adapters/joints where the length/depth and angle of cut is not precisely the same and hence do not always fit snug with a mating piece. From the pic it looks like the eBay adapter would work, and of course the PlanetVape adapter definitely will.

 

[Smoke1ForMe]

Just got tracking for my vapexnail, have some nug run shatter waiting for it!

 

[z9]

I have a question for anyone with a VXNail already.

On the VXNail, how far out does the glass rim you grab stick out? Reason I ask, I'm trying to figure out if an 18mm female to whip adapter could be used with the VXNail.

I see Planet Vape has an adapter marketed towards the EVO, which is exactly what I'm looking for. It's sold out though The only other 18mm female to whip adapter I've been able to find has been the one on the eBay link.

I currently do not own a hydratube, only the standard mouthpiece. Was looking for a way to hook the VXNail up to my Mobius.

I know adding in some silicone tubing isn't the ideal thing to do with an all glass air path, just trying to give myself a few options til I acquire a hydratube.

Any help is appreciated, thanks!

Have you considered use a female to female/male adapter then a whip adapter? It should give you the extra clearance you need and allow for more whip adapter options. The clearance on the nail doesn't seem to be too high though

 

[Roth]

Take a look at the 2nd pic in @S1N3's great post here:

http://fuckcombustion.com/threads/vapexhale-cloud-evo.11357/page-153#post-584733

The rim has a slightly smaller diameter than the top edge of the EVO joint, upon which it rests. The nail is grasped by the hollow "handle" that rises up from the rim. The rim and handle fit up inside the 18/19 female joint inside an HT. Consequently any female 18/19 GonG joint would presumably work, as long as there is an approx 1/2" open area just above the ground section into which the nail's protruding handle can fit. That said, I have adapters/joints where the length/depth and angle of cut is not precisely the same and hence do not always fit snug with a mating piece. From the pic it looks like the eBay adapter would work, and of course the PlanetVape adapter definitely will.

Many thanks, had somehow missed that pic! Hadn't thought about that if it fits in a hydratube, any normal 18mm female GonG should work. Provided, as you said, there's enough clearance. Going to blame that one on being tired...ya, that's it!

Just sent a question to Oregon Glassblower about making this piece, but with a female instead of male. Waiting to hear back.

Have you considered use a female to female/male adapter then a whip adapter? It should give you the extra clearance you need and allow for more whip adapter options. The clearance on the nail doesn't seem to be too high

I had not, and prefer not too (just one more piece). But I will definitely keep it in mind for a backup if all else fails. Thanks!