Discontinued VapeXhale Cloud EVO

[CentiZen]

Where on the unit are you taking your IR reading? And on which version Cloud?

Directly down the bamboo, at a 185 degree angle which places the beam directly on the first ring in the glass. I'm aware these readings are not going to be totally accurate, but I know what the temperature readings were like on the Cloud before it broke so I am able to use that knowledge to get it relatively back to the same spot as before. This is on an OG ticker.

 

[techandchess]

Question - stonemonkey, why can't you add accessories to the pre-order? It would be awfully silly to pay $25 (or $70 intl) for shipping, then pay for shipping again if I want an extra hydratube or some ELBs.

 

[Dr. Plutonious]

Question - stonemonkey, why can't you add accessories to the pre-order? It would be awfully silly to pay $25 (or $70 intl) for shipping, then pay for shipping again if I want an extra hydratube or some ELBs.

Email support. I added ELBs to my order without a problem.

 

[S1N3]

Some things to report:

1) Mobius Clear Matrix paired with the Evo is fantastic (dial set to death )

2) Every iteration of the idea I raised in this thread is painfully inefficient: http://fuckcombustion.com/threads/has-anyone-tried-to-replace-a-vapexhale-elb.11865/

The verdamper method seemed to be the least cumbersome to pack(load) but in both ideas, I failed to consider the need for a TOP screen. This 2nd screen to prevent flowers from being sucked up into the air path. After solving that with an ELB, the results were still lackluster.

Overall amount of connection involved made it very very precarious. Something bad would surely happen resulting in broken glass.

The carbon filter was not even worth trying to fill, so I didnt bother going any further on that route.

 

[Silent]

Some things to report:

1) Mobius Clear Matrix paired with the Evo is fantastic (dial set to death )

2) Every iteration of the idea I raised in this thread is painfully inefficient: http://fuckcombustion.com/threads/has-anyone-tried-to-replace-a-vapexhale-elb.11865/

The verdamper method seemed to be the least cumbersome to back but in both ideas I failed to consider a need for a TOP screen to prevent the dry herb from being sucked up. After solving that the results were lackluster and the overall amount of connection involved made it very very precarious. Something bad would surely happen resulting in broken glass.

The carbon filter was not even worth trying to fill, so I didnt bother going any further on that route.

Awesome .gif mate! Saving that!

 

[macbill]

My EVO and Swagger HT is my first experience with glass. Can a person put a hydro tube in the fridge (not freezer) and cool it down before placement on the EVO or will cold glass contact with hot source break it?

On another note and as mentioned in the Cloud thread, I find trimmed-to-size styrofoam pool noodles sliced up the length works well in just storing a glass tube.

 

[elmomuzz]

I've been keeping my hydratubes in the fridge for over a year without a problem. I use a dorm room mini fridge to hold beer, weed and the tubes. It's awesome.

 

[Zangano Cruel]

Fuck ELBlessness

http://instagram.com/p/iScyKZMOPR/

Stay vaped...

 

[Pappy]

*Notable...
Because I'm getting better yield (more hits) I require longer sessions. As a formality I reset EVO for double sessions because one isn't long enough. EVO retains herb potency "inter-session" longer than any other desktop vape Ive tried including the Cloud. If you're into potency + efficiency, that's notable.

 

[PoopMachine]

Fuck ELBlessness

http://instagram.com/p/iScyKZMOPR/

Stay vaped...

Nice... I have like 30 of them on hand.. and most of them are clean since my ticker has been dead since May

Viva El Evo!

 

[BubbaGump]

We found the person and she is perfect

Any word on when this might go down?

Don't think you could have done any better w/choice.

This wandering vagrant will be eager to see. Just hope I don't miss any updates.

 

[Enchantre]

I got an email from VXL PR agent, and we are still in wait mode, apparently.

 

[weedemon]

i just wanted to mention i got my 2nd part of my order. the travel case.

it feels very heavy duty. I would like to say thanks to VXL for such an awesome product (the whole package really, but I mean the evo itself)! I really love mine!

 

[t-dub]

Happy Holidaze from the vapor lab . . .

 

[stonemonkey55]

Some things to report:

1) Mobius Clear Matrix paired with the Evo is fantastic (dial set to death )

2) Every iteration of the idea I raised in this thread is painfully inefficient: http://fuckcombustion.com/threads/has-anyone-tried-to-replace-a-vapexhale-elb.11865/

The verdamper method seemed to be the least cumbersome to pack(load) but in both ideas, I failed to consider the need for a TOP screen. This 2nd screen to prevent flowers from being sucked up into the air path. After solving that with an ELB, the results were still lackluster.

Overall amount of connection involved made it very very precarious. Something bad would surely happen resulting in broken glass.

The carbon filter was not even worth trying to fill, so I didnt bother going any further on that route.

If you keep the ELBs clean, they are very easy to pack

 

[Vapinghole]

If you keep the ELBs clean, they are very easy to pack

+1! I clean the living shit out of my ELBs. After two or three uses they get dunked in ISO.

 

[BubbaGump]

Merry Christmas to all!

 

[VapeNStone]

Merry Christmas everyone!! I would have added some Christmas music but all I had was me and my phone. Oh and totally don't mind me pretending to hit it with no elb in lol

 

[exit]

If I buy a EVO tomorrow will it come with all those rubbery wristbands? lol

Last question, Just out of curiosity, i wonder if the "combustion problem" is more about how people have been using it vs. a problem with the design or something? I still plan on getting one even if people still say they're getting the ol' combustions once in a whil.

Sounds like its a problem with cracks in the air path tho?

elmomuzz: why is your LED blue? I want BLUE! All EVOs I've seen yet had a green-cyan light on temp. I definitely like blue more. Is that custom, or modded, or...?
I remeber I also saw a purplish-blue LED once in a stonemonkey video, but that was imo different and it was a frankencloud (original enclosure).

Man sometimes i feel like i'm the only person trying to get mfg's to stop putting blue LEDs in their vapes.....

If i'm wearing blue blocking glasses, i can't see the blue lights. If they're off, they're painful to retinas and not good for your eyes in the dark to be looking at bright blue lights

 

[Deadshort480]

Hey...

You guys wanna see something pretty cool?

Check this shit out...

Not only my first attempt to video it, but my first attempt at attempting it. Girl Scout Cookies in the EVO and Mr. Nice Guy shatter on the dabber. Powerful stuff.

 

[Bob Loblaw]

^^ was waiting for that from someone w/ that piece! ^^
well done!

 

[2 Paces]

I was just enjoying a lazy morning with the EVO. I've been experimenting with kief from my 4 piece grinder. I just got the grinder recently, so kief is a new thing for me.

I can't believe how well the EVO handles it. I put approx 1/8"-3/16" in an ELB with the dial on about 2 o'clock. It gets the whitest vapor, and then the vapor production tapers off. I end the hit when the vapor drops off a bit, then stir & repeat. I didn't know how the EVO would handle dust, but I have not combusted yet. I am so incredibly high right now.

In my state of mind I thought of something. I wonder if the shut off feature could be tied to a motion sensor and a timer in future models. It shuts off after a certain amount of time if it has not been moved (like the Pax does now). The timer resets with motion. That way the safety is still there for those that forget it and leave it on, but those that use it throughout the hour don't have to worry about toggling the on/off switch, they just have to keep hitting it

 

[M00NEY]

agree! - either a prox sensor or an acceleromator would do the trick... a combo would be the tits... and the ability to set the unit to power up with motion detected would also be amazing - sit down at your station, unit begins to heat because you're there, prepping...

Post edited to avoid double posts back to back...

Wanted to share my station and the funnel that I found at a container store (The?) for $0.89. I grind on to a folded paper and then can either pour or scoop into this funnel which fits so perfectly it blew my mind. Note, the ELB pictured was a little fuller than I have now learned to go to:

 

[Sinclue]

I use what are often called "Doob Tubes". There are many varieties. Here's one:
http://www.amazon.com/Doob-Tubes-Ai...UTF8&qid=1388082763&sr=8-2&keywords=doob+tube
If you are near a dispensary they also sell blunts in nice little containers that can be used the same way.

After grinding you can use the tube to scoop up you material and fill the tube with as much as you want. I have several different "vintages" already in tubes. I open one up and with a slight rolling motion the herb flows quite nicely into the ELB (or back out if you overfill).

 

[Deadshort480]

^^^^^ My exact method.