Discontinued VapeXhale Cloud EVO

Vapodudule

Well-Known Member
I reviewed my judgment for the level of heat of my device since max temp brings really charcoal matter but no combustion.

My error was the heat soaking indeed, the range is very different than a dynamic use from a cold start. 1-3 pm for me now with heat soak.

The extraction is really special. Beast mention.

Only Downside is the long IGG deal...
 

treeman

Well-Known Member
Hey all, recently got my international evo, its largely fucking excellent. However I have a couple of gripes and I was wondering if other international folk are also experiencing them. I suppose mainly its that the temp control doesn't seem to do much, if I go from max to 3 on the dial (assuming the dial is a clock) I get a huge reduction in vapor density. As in, basically the only setting worth using is max. Which I don't overly mind as it does work but I was really looking forward to thick low temp vapor which I don't seem to be able to achieve.

I also am getting some glitching. Sometimes it flashes between green and red and won't heat. I usually have to switch it off for maybe 1-2 minutes and then it starts working again. While this is totally fine I'm curious to see if anyone else has observed similar phenomena?

Cheers!
 
treeman,
  • Like
Reactions: Teedub

Vapodudule

Well-Known Member
That's awesome news! So with your 30 vapes experience, how does the EVO stack up?

The comparaison between 30 vapes is absurd, i think i had VAS severe and did not approach completely all the 30, i missed VG before i discover it. The performance is the standing through time and performance.

For VXL, the whole user experience is at the top of the lead thinking about the path since the ELB and clouds+ i did not see..

The EVO keeps his promises to extract. It does the job , the flash of vapor is here no doubt. When you stir in an ELB a bit, it seems to make the loads disappear in the sides of the ELB and then non vape so you have to no stir but tap the ELB and adapt the load or give the mini ELB (EQ screen +ELB cap crushed) a try.

I use it upright with a female bubble+whip. Visual control of the output.

I am afraid to do so but i could attest than you can put a huge amount 0.5+ in an ELB and have a low temp extraction and a massive cloud of one hit extraction. But it would be wasty.
 
Last edited:

stonemonkey55

Chief Vapor Officer
Manufacturer
Hey all, recently got my international evo, its largely fucking excellent. However I have a couple of gripes and I was wondering if other international folk are also experiencing them. I suppose mainly its that the temp control doesn't seem to do much, if I go from max to 3 on the dial (assuming the dial is a clock) I get a huge reduction in vapor density. As in, basically the only setting worth using is max. Which I don't overly mind as it does work but I was really looking forward to thick low temp vapor which I don't seem to be able to achieve.

I also am getting some glitching. Sometimes it flashes between green and red and won't heat. I usually have to switch it off for maybe 1-2 minutes and then it starts working again. While this is totally fine I'm curious to see if anyone else has observed similar phenomena?

Cheers!

We also built in an extra layer of safety if the unit is over heating which is why sometimes you will have to wait one or two minutes before it starts to heat up again. We felt that it was worth allowing the unit to cool down then to have possible overheating. Glad to read that you guys are happy. Sorry for being in and out so infrequently but I am very much inundated with travel and meetings these days. All great things for the next phase of this company.
 

lolling boris

Well-Known Member
So i received the IGG EVO 220V! The first one was DOA.

After several sessions at 1pm, i bump it up to Max temp and no combustion at all, for any config. The max temp is the way to go now.

The device gets hot indeed and delivers extreme vapor but never combust whatsoever at max temp.

yeah full temperature works best for me too.
 
lolling boris,

IAmKrazy2

Darth Vapor
After another week with my Herbalizer i have come to the conclusion the Evo is far superior and more fun to use for concentrates if you are seeking that dab like experience, want higher temps, and/or wish to conserve your concentrates. Because of this, i have ordered 5 more VX Nails. Looking forward to extensive testing after sadly breaking my first two nails. The Nail Buddy or whatever the stand is called sadly is sold out, or i would have bought one too.

The biggest difference in making the evo my favorite was in use of bubble hash in the evo. The evo plus the nail is by far my all time favorite way to consume full melt bubble. Its amazing in how little of a pinch will actually produce lung busting results. Evo also provided the much better experience with shattet too, IMO.
 

LongIslandmom

Well-Known Member
So has anyone seen this adapter set on planet Vape for $30? It does have the tubing and I think it would be great not to have to invert. Has anyone tried this set?
 
LongIslandmom,

scottg402

Well-Known Member
So has anyone seen this adapter set on planet Vape for $30? It does have the tubing and I think it would be great not to have to invert. Has anyone tried this set?
Well I tried it and it works great. I just wish the tubing was a little longer for certain cases but you can get tubing elsewhere if you need.
 
scottg402,

LongIslandmom

Well-Known Member
I just get so nervous that it's gonna somehow break or something will happen with the bamboo

I have to say though it is more powerful than the solo

Since I'm on my break it could be something nice to wait for.
 
LongIslandmom,

solodolo420

Well-Known Member
I just get so nervous that it's gonna somehow break or something will happen with the bamboo

I have to say though it is more powerful than the solo

Since I'm on my break it could be something nice to wait for.
I have been using it inverted the whole time, you can just take it out when your not hitting it. Mine stays when I leave it in but I get so nervous that my cats will tip it over.
 

Dr. Plutonious

Well-Known Member
90% of the time I use my EVO inverted and I have never had a problem with performance or small.

I mean, Vapexhale sells accessories like the Hydrafoot. Vapexhale products have always been meant to use inverted (except with vapexnails).
 

GratefulVapor

Phish Head
90% of the time I use my EVO inverted
Same here, except closer to 95% .. probably more often than that. I don't own any vapexnails (I don't have access to quality meds/concentrates; sadly live Eastbound & Down), so I personally have no difficulties inverting.
I've been using it with a HydraTube since first acquiring my OG Ticker, but this has typically been a rare event. I have always preferred inverting it & using with "traditional" glass, even when it was a HEAVY. The EVO is so much lighter (which is one of my fav. qualities of the EVO) :tup: .
I think the whips are/were meant for use with the vapexnails, but I guess some owners have taken to using them 24/7 ... flowers or erlz :uhoh:. IMO ("my opinion"), this is incorrect procedure with thy flowers.. :myday: :argh:

Stay lifted my friends :peace:
 
GratefulVapor,
  • Like
Reactions: Mrmrmrmr

biohacker

HREAM
One thing to be mindful about when using the EVO inverted is the backpressure created that can cause respectable amounts of vapour to be pushed straight up and out the bottom of the bamboo. Kinda cool to watch actually, but will accelerate how quickly your bamboo gets dirty, and can affect taste. Just something to keep an eye on for those ripping clouds inverted. :2c:
 

Roth

Pining for the Mountains
One thing to be mindful about when using the EVO inverted is the backpressure created that can cause respectable amounts of vapour to be pushed straight up and out the bottom of the bamboo. Kinda cool to watch actually, but will accelerate how quickly your bamboo gets dirty, and can affect taste. Just something to keep an eye on for those ripping clouds inverted. :2c:

Definitely true (more so with some percs/pieces), but easily avoidable. Just lift the EVO out to clear the piece without stopping inhaling, you'll get literally zero back pressure. Just like you'd do with a bong back in the day, you wouldn't want to blow the cherry out of the bowl!
 

bigmouth

Well-Known Member
Random question: I finally put the neoprene(?) sleeve on my Cloud EVO. Does anyone know that the little velcro tab at the bottom is for? My first thought was to wrap the cord, but it's not really long enough for that.
 
bigmouth,

Stu

Maconheiro
Staff member
clausen (did i spell that right?)
No. It has two s's.
Claussen-Pickles-32oz-Jar.jpg


Unless you meant Claisen? :shrug:

:peace:
 
Random question: I finally put the neoprene(?) sleeve on my Cloud EVO. Does anyone know that the little velcro tab at the bottom is for? My first thought was to wrap the cord, but it's not really long enough for that.
I believe it's to keep the sleeve from sliding up from constantly grabbing it. It may look like it'll restrict air but it doesn't. If it restricts anything its particles from being sucked into the bambo. Just my:2c:
 
Top Bottom