Discontinued VapeXhale Cloud EVO

Zangano Cruel

Zangano Cruel

IG zan.cru (code) zancru (5% NV checkout discount)
Buenas noches FC:
It's always interesting the little $1 things you can find in an antique store.

From old school glass pen holder???? maybe???

jy8u.jpg


To a more refined ELBs , poker, spoon & dab tools etc etc cool looking holder.

eahe.jpg


To celebrate, 3 Blue Dream back to back elbos :rockon: :smug: Mandatory celebration milkshot :cheers:

mjvt.jpg


Stay vaped...
 
gvape

gvape

Well-Known Member
So after having my unit sit in its box to be shipped backed to VXC for quite some time I finally got it shipped out and back to me. After another week of it sitting in the box I finally had a chance to take it out. I turned it on and noticed a clicking sound on the inside every few seconds. Didnt think much of it though. After it heated up at the temperature I had used before (just passed noon) I loaded up a bowl and ran it through. I got a faint wispy hit. After finishing my bowl I noticed a horrible plastic wire type smell, but didnt think much of it.

I ran two more bowls through it and cranked it all the way up to max temp. I cant get much vapor until I get to about 3pm, and even at 5pm its still not that thick. My finished abv is a lighter brown than any bowl I have ever finished in a cloud. Apparently whatever work I had done to my unit something else got messed up too because it is not working right. I was really hoping I would be able to use concentrates in it now that I got it back, but it looks like I will have to send it back to vapexhale again and get it fixed from them breaking it since it is not working worse then it was when I sent it in.

Kind of a bummer that this vape has never worked 100% for me. Its still one of my favorites just wish it was working perfect. Im sure VXC will take care of me and any problems just hate the wait.
 
gvape,
  • Like
Reactions: mlo4sho
aj0125

aj0125

Well-Known Member
Where can I order a longer and more flexible cord for the EVO that I know is compatible? The link I found earlier in this thread is dead. Thanks guys, I do not know anything about power cords but I need a longer one that will not hurt and will work with the EVO.
 
aj0125,
Hexi

Hexi

Well-Known Member
llamaman001 said:
I tried a normal sized dab the other day and all I did was SMASH it in the elb cap on the bottom, that way when I put the cap on the dab was basically upside down and on the inside of the elb. Running it at full blast got me 2 really good tastey hits but they were on the whispy side. There was no residue or messy clean up after either.
Click to expand...

About what size was the concentrate? (I've never used a dabber) The variation in the type/formation of the concentrate will make a huge difference, but I get nervous when there is no residue. (especially if a hit isn't very thick) Be careful it just doesn't melt and then go from the top of the cap, out of the gong and into the bubbler/hydrafoot.

Since I've been using cotton, I've noticed even with nice thick concentrate hits, I'm still at least 3-4 more hits away from clearing it, and that's being conservative. I get my concentrates in 1g containers, and generally do about 1/15th of a gram per chunk? (estimate at best). I can pull hits for a good long time using cotton. When I've tried 2xCap method or MiniELB method the variation was very large and I could never quite tell if I just "missed" a hit and the concentrate simply dripped into the bubbler.

The cotton at the end of the session is my visual confirmation about what went on. In general, "great success" is a dark or light brown underwear looking stain on the cotton. (bubble hash leaves crusty rabbit pellets) Oil will sometimes leave a hard, dark brown crust.

aj0125 said:
Where can I order a longer and more flexible cord for the EVO that I know is compatible? The link I found earlier in this thread is dead. Thanks guys, I do not know anything about power cords but I need a longer one that will not hurt and will work with the EVO.
Click to expand...
monoprice
amazon
staples

I have a Belkin from stables, it's much longer and doesn't seem to have as much tensile strength.
~$4 and a lot more user friendly than the stock
http://www.staples.com/Belkin-6-Pro-Series-AC-Power-Cable/product_657015
 
newVaper420

newVaper420

Vapor Enthusiast
aj0125 said:
Where can I order a longer and more flexible cord for the EVO that I know is compatible? The link I found earlier in this thread is dead. Thanks guys, I do not know anything about power cords but I need a longer one that will not hurt and will work with the EVO.
Click to expand...

I ordered this cord as recommended by some members on the forum.

http://www.amazon.com/gp/product/B000068OA5/ref=oh_details_o01_s00_i01?ie=UTF8&psc=1

Works good but I still use the original cord mostly.
 
newVaper420,
  • Like
Reactions: Hexi
R

Ricchini

Well-Known Member
So guys I'm freeing up the cash to finally make the splash. I'm going to become a member of club EVO, hopefully by the 20th of next month. I'm selling off my video games, unnecessary electronics to get this critical piece of tech.

All I need is my drawing utensils, willpower and a VapeXhale EVO and I'll be having one damn good spring.

Felt compelled to post, because I'm incredibly excited that I have got the ball in motion, and that I have made the firm decision that I'm going to pick up this lovely vape to compliment my Digital Cano.

I think I'll have all my bases covered in terms of desktop units.

I love love me some good design, I'm actually in art school going to study exactly what great design is. You guys have sold me on adding this unit to my small but considered stash of top-end vapes.

Words can't express how excited I am. Now, I'm going to haul ass and keep working my balls off in school, gotta keep growing; that's why I'm ditching the videogames, sharpening the pencils down to the nubs, and waiting ever so patiently to call this beauty mine.
 
5dogswalking

5dogswalking

Well-Known Member
I'm excited to get my Hydraline on Thursday. It is replacing my Swagger Circ. I chose it because (it looks bitchin') I think I'll like the bigger draw and the option of using ice. I am going to get lucite about 3"X5" and glue the hydrastand on it. When I broke my circ it was setting on the stand. Too small and unstable imo. Meanwhile, back to my Plenty. So harsh, had no idea until I became spoiled (forever).
 
Mrmrmrmr

Mrmrmrmr

Well-Known Member
Is someone willing to make a video using .05 so I can see what sort of cloud production there is ?
Thanks
Mr
Vape n'stone .1 is okay as well smallest amount possible I'm wanting to see how efficient the evo can be.
 
Last edited:
Mrmrmrmr,
  • Like
Reactions: SD_haze
macbill

macbill

Oh No! Mr macbill!!
Staff member
I am going to get lucite about 3"X5" and glue the hydrastand on it.
Click to expand...

What a great idea! Maybe even a glass block... or a big piece of tile or tile trivet.
 
Last edited:
macbill,
R

Ricchini

Well-Known Member
macbill said:
What a great idea! Maybe even a glass block...
Click to expand...

What I would do is look for some stuff called "Envirotex Lite". It's a liquid glass, two part epoxy that cures hard as balls, looks shiny like liquid glass, it's much more permanent of a bond than using typical hot-glues, caulks or any other Jerry rigged adhesion method.

I'd mount the hydrastand to a nice solid block of wood, get you one of those non-slip cell phone mat/thingys so your wood block cannot slide off the table.
 
Ricchini,
  • Like
Reactions: macbill
SD_haze

SD_haze

Well-Known Member
Mrmrmrmr said:
Is someone willing to make a video using .05 so I can see what sort of cloud production there is ?
Thanks
Mr
Vape n'stone .1 is okay as well smallest amount possible I'm wanting to see how efficient the evo can be.
Click to expand...
I can tell you right now that, even with as low as 0.05g loaded, you can get a massive cloud with a high temperature setting. It's easy to white-wall a tube at any quantity, if your herb is quality and the temperature is high enough.

Now, if you were more interested to see a video of 0.05g loaded with a lower temp setting, like 10-12:30, then that might be more useful to you. At that setting you're getting more wispy vapor but maximum flavor and you're also maximizing your body's efficiency at processing the inhaled THC. :2c:

I personally have 14 vapexhale videos (4 of them are EVOs) on my youtube channel. I can't recall any of them being 0.05g. They're usually on the heavier load-size side, just to showcase the vaporizer's limits.
 
Zangano Cruel

Zangano Cruel

IG zan.cru (code) zancru (5% NV checkout discount)
SD_haze said:
I can tell you right now that, even with as low as 0.05g loaded, you can get a massive cloud with a high temperature setting. It's easy to white-wall a tube at any quantity, if your herb is quality and the temperature is high enough.

Now, if you were more interested to see a video of 0.05g loaded with a lower temp setting, like 10-12:30, then that might be more useful to you. At that setting you're getting more wispy vapor but maximum flavor and you're also maximizing your body's efficiency at processing the inhaled THC. :2c:

I personally have 14 vapexhale videos (4 of them are EVOs) on my youtube channel. I can't recall any of them being 0.05g. They're usually on the heavier load-size side, just to showcase the vaporizer's limits.
Click to expand...
I totally agree with you.
@Mrmrmrmr you'll be amazed by the capabilities of a Cloud OG, + or EVO.
I have an EBay Fakexhale Cloud + and an EVO. Both produce quality vapor output. Sometimes, when I'm really stoned, I hit an unloaded ELB and I see and feel really wispy vapor. What's going on?? Did my EVO broke :cry: ??
Nope, just too stoned to hit an unloaded ELB.
IMO, if you can get vapor from an empty dirty elbo... you have in your hands a winner of a vape.
Stay vaped...
 
Zangano Cruel,
Mrmrmrmr

Mrmrmrmr

Well-Known Member
I had a + and a og ticker so I know alittle bit about clouds. For anyone who has both models would you say the evo has a higher rate of extraction & effiency over its predecessor ?
 
Mrmrmrmr,
gosaints420

gosaints420

Well-Known Member
I just got my Evo but I'm not sure it is working properly. If I try to use a small amount in the elb I can't get dark abv, even at max temp. Half an elb at max temp the avb is a darker brown but it takes a few hits(3-5) and they are somewhat wispier than I would have expected. This is my first Cloud so still learning but I've seen a few posts where people say they combusted at 3 I can't even come close to combustion even at max setting. Also a couple of times I've overwhelmed the heater and got the red light to start blinking.

It's definitely still medicating me quite well but for the money I would like it to work perfectly. So do you guys think I need to open a ticket or am I just expecting to much from the Evo?
 
Last edited:
gosaints420,
  • Like
Reactions: lazylathe
VapeNStone

VapeNStone

Mark
There have been some EVO's that needed adjusting. So you might want to just ask them. How long were you letting your unit what up? Were you hitting right away from cold or allowing it to saturate with heat first? Oh and you didn't overwhelm the heater that is the auto shutoff happens after one hour.
 
Last edited:
VapeNStone,
2 Paces

2 Paces

Well-Known Member
gosaints420 said:
I can't get dark abv, even at max temp. Half an elb at max temp the avb is a darker brown but it takes a few hits(3-5) and they are somewhat wispier than I would have expected. This is my first Cloud so still learning but I've seen a few posts where people say they combusted at 3 I can't even come close to combustion even at max setting. Also a couple of times I've overwhelmed the heater and got the red light to start blinking.

It's definitely still medicating me quite well but for the money I would like it to work perfectly. So do you guys think I need to open a ticket or am I just expecting to much from the Evo?
Click to expand...

Sounds to me like it isn't heating enough.

I always use mine at 2 o'clock. I get very dark brown ABV every time. I've had very slight combustion a few times at that setting when I tried to take too long a pull or tried to get too many pulls out of an ELB.

I also fully combusted once (glowing red cherry and all) when I had unknowingly bumped the temp up. It still wasn't even at max temp, but it was immediate combustion.


I'm no expert, but yours sounds like it could use a tweak.
 
M00NEY

M00NEY

Well-Known Member
I agree - the heat saturation level is a crucial part of the equation when looking for thicker vapor and darker ABV. If you are hitting inside of 5-8 minutes, and your ABV is lighter than you like, try waiting another 5 min.

SD_haze said:
I can tell you right now that, even with as low as 0.05g loaded, you can get a massive cloud with a high temperature setting. It's easy to white-wall a tube at any quantity, if your herb is quality and the temperature is high enough.
Click to expand...

could not agree more.

SD_haze said:
Now, if you were more interested to see a video of 0.05g loaded with a lower temp setting, like 10-12:30, then that might be more useful to you. At that setting you're getting more wispy vapor but maximum flavor and you're also maximizing your body's efficiency at processing the inhaled THC. :2c:
Click to expand...

Would you mind either expanding on this a bit or pointing me to some reading material on the subject? I am trying to learn about the efficiency of absorbing vs blasting massive clouds all the time.

TIA
 
M00NEY,
You must log in or register to reply here.
Top Bottom