I will try more coils and not to glow. This still have a great build and looks awesome.
Why so? Has similar ones that performed fine
I have no idea how you’re getting vapor at such a low temp. Do you have any more details?
I’m no good at video so I hope these are viewable. Like I said in an earlier post, no coil glow for me. I understand your concern about the coil glow @oddjobold but here’s another data point for you. The mod is autofiring at 350° in first vid, 400° in second vid, and 420° in last vid. No coil glow at any of these temps and plenty of heat. The mod is autofiring for the entire time during each video (36secs, 38secs, 30secs). Hope this helps. I’ll try and get more video firing the VaporCane on top of one of my AF/RP mods, and again on just a regular mod running TC.
One thing is the 510, other the mod. The 510 is well calibrated, and i dont mean just the coil. The airflow and heat retention is part of the calibration in a 510 vape (i had tryied other 510 with shitty airflow and heat retention, and it impoverish the performance a lot, no matter the coil). And i use a poor tc mode this is not a DNA
It is because the mod. I think it doesnt work very well in tc mode. I will try it in the paramour (just the coil, the body doesn’t fit).
I never vape at 420°, that temp was just to show that the coil doesn’t glow at that temp. I stay below 400°, usually between 340° and 390° when using my temp controlled vapes. I may sneak above 400° for a quick last toot to cash a bowl after all the flavor is gone, but that’s rare for me.
And the cane give you good results at 340-390F?
Yes. All of my vapes do well in that range. For me at least, I’m not chasing clouds.
I tried the base and coil with the paramour and it doesn’t glow at 200/210C
Tue makes wonderful things, the wood is really superb, the finish is really amazing, it's really a great job and good price ($110 USD)!
I received mine today (7 days to delivery Vietnam->France) and I already love it, at high power/temperature, I find it very similar to Tinymight, fast, on-demand heating, adaptable to any mod (wattage or TC)
The mouthpiece works really well and I think it's nice, look at the finish, it's incredible:
I started by using the wattage mode at 30W (the manufacturer recommends 25-28W), then I tried the TC mode with my Voopoo Drag X Plus Pro set at SS316 190°C and it works well!
Here's a quick comparison with an RBT Splinter Z:
The VaporCANE is much smaller than I thought, and that's a good thing, I love it! I love the idea of the integrated chamber instead of the chamber in the mouthpiece, it's great for watching and stirring quietly.
I discovered the DNA chipset recently (I'm new to rebuildable) and I bought a Hyperion DNA 100C but haven't yet found the right settings, in SS316 mode at 30W and 230°C, the coil heats up, but not enough for my taste (but it doesn't glow, unlike to my voopoo), if anyone has any recommendations on this subject, I set the TCR to 0.00224 via Escribe (manufacturer's recommendation), but even with higher wattages or temperatures, the coil never glows, how come? it does not display any errors, Why does it glow on Voopoo and not on Hyperion DNA? not that I'm trying to make it glowing, but the temperature is too low to obtain a good extraction worthy of the name, it doesn't work like on my Voopoo with TC mode. I must have missed something.
Tue also agreed to make custom sleeves for my prototypes, it's really nice of him, the work is as usual fabulous and corresponds perfectly to my drawing, this manufacturer has enormous know-how and incredible potential
If you're a 510 mod enthusiast, I highly recommend the VaporCANE
I tried to use the TCR at 1000 (the minimum) at 100C (the minimum again). If it would have a better temp reading 8 seconds would be ok. The problem, at least in this 510, is the coil is made to have a 225/250 TCR, but the minimum tcr in the device is 1000.
Glowing or not, the coils would last a long time.
Great! yes, DNA is more complicated, I haven't figured it all out yet either
don't hesitate to share your settings!I personally prefer the VaporCANE to my Splinter Z, which is huge and takes longer to heat up, but both work well!
Much more complicated, i thought it would be easier than arctic fox but nope! and it doesn´t have tcrGreat! yes, DNA is more complicated, I haven't figured it all out yet either
I find the wattage mode to be the easy way to go, but! i see no way to not to glow the coil. Do you glow it?
Yes, in wattage mode at 32W the coil glows, I hope I'll be able to find such a good puff with the DNA mode in TC mode, I think it's possible without glowing, but I can't find much information about the DNA mode and how to use the software. There's no official documentation on the site, apart from a few videos on youtube. I have a lot of questions about the boost function and the punch setting as well as many other things that remain unanswered at the moment, it would be nice to share a configuration file or related documentation.
