TinyMight Vaporizer

Grass Yes

Well-Known Member

andrew`124c41+

Well-Known Member
Looking good, @andrew`124c41+ ! Typically when I travel and I want to bring my TM, I don't bring a lot of extra glass so I just use an old camera case, almost exactly like this one: https://www.amazon.com/Case-Logic-DCB-302-Compact-Camera/dp/B003F7DWH8/ Fits the TM with the stock stem and has room to pack the Ed's TNT long stem too. I can also put in the two battery hard pack for extras. Grinder packed separately, 😉
Hmm. The link did not work. But, did you pay 12 dollars or less:-)
 
andrew`124c41+,
  • Like
Reactions: Grass Yes

roger plywood

Well-Known Member
Does anyone know where I can buy basically an exact copy of the og tinymight stem? I don't really want to order one off the site, just looking for a similar size stem where I can fit the original cooling unit into
These work. The internal diameter is slightly larger so the cooling unit can move a little at first, but after one bowl it's gunked enough that it sticks. This is what I use at home, although I've just got the bubbler so that might change! :ko:
 
Last edited:
roger plywood,

roger plywood

Well-Known Member

HashOnMyMind

New Member
Hi its me again. So after getting a TM for Christmas i have changed the CU a bit with some sapphire/ruby balls i had lying around which feels good although i probably need a few more.

I still dont get good hits unfortunately compared to my Dynavap. Its one mostly wispy hit while the Dyna gives me 2-3 huge hits (without combusting of course)
Its maybe the different inhale? I can drag on the Dyna until the cool-down click comes but its hard to draw long on the TM as its so open that i get tons of air so quick.
I have made some pictures of the oven and the black o-ring. Does everything seem in order?

Man i really wanna love this device. I see a lot of people getting huge hits even of CBD and multiple at that while i can do one hit period. 0 Vapor on consecutive hits even on Temp 4.

Someone described it to me as a Dyna+IH in a compact device which sounded amazing and exactly what i wanted but right now im only using it when i want to test it more but use the Dyna to get huge rips and get medicated.

Its sad to me because i know the TM can do more as ive seen the rips of other people. Maybe its that im using not enough bud? Ive seen people talk about micro dosing in the TM with 0.01 though literary putting in 2 dots of green with not even the screen coated and getting a small cloud.
Im kinda lost besides thinking my TM has an issue as i cant believe a 60$ Dynavap hits much harder with tons of clouds.

Oh also HAPPY NEW YEAR!!!!! :clap::party:
 

Attachments

  • IMG_4122.JPG
    IMG_4122.JPG
    935.7 KB · Views: 35
  • IMG_4125.JPG
    IMG_4125.JPG
    990.6 KB · Views: 36
  • IMG_4127.JPG
    IMG_4127.JPG
    1.6 MB · Views: 35

andrew`124c41+

Well-Known Member
Is this about how dense the vapor is...that the Dynavap which I have not used provides?

I just got my TM which I set a 4. My vapor at this setting is invisible. I run in through a WP and I get the result I want.

If I step up the temp to above 5, I start to see the vapor as a whitish cloud.

The bottom line is that personally, I don't want a thick cloud to irritate my throat and bronchi..
But that is my preference. Anyway, I don't think anything is wrong with your device.

I have noticed a difference. Some product I have is finer and more dry than others. It clouds up at a lower temp.

I also suspect that the Dynavap clicks at a higher temp than you have set for the TM.

I will do quite a few hits at 4 and I can definitely tell the unit is getting warm. When I turn it off and remove the WPA Adapter to check the product, the glass is quite warm. You can check these things.
 
Last edited:
andrew`124c41+,
  • Like
Reactions: Bad Dog

Shit Snacks

Milaana. Lana. LANA. LANAAAAA! (TM/FW7/OAB/CC-H&A)
Hi its me again. So after getting a TM for Christmas i have changed the CU a bit with some sapphire/ruby balls i had lying around which feels good although i probably need a few more.

I still dont get good hits unfortunately compared to my Dynavap. Its one mostly wispy hit while the Dyna gives me 2-3 huge hits (without combusting of course)
Its maybe the different inhale? I can drag on the Dyna until the cool-down click comes but its hard to draw long on the TM as its so open that i get tons of air so quick.
I have made some pictures of the oven and the black o-ring. Does everything seem in order?

Man i really wanna love this device. I see a lot of people getting huge hits even of CBD and multiple at that while i can do one hit period. 0 Vapor on consecutive hits even on Temp 4.

Someone described it to me as a Dyna+IH in a compact device which sounded amazing and exactly what i wanted but right now im only using it when i want to test it more but use the Dyna to get huge rips and get medicated.

Its sad to me because i know the TM can do more as ive seen the rips of other people. Maybe its that im using not enough bud? Ive seen people talk about micro dosing in the TM with 0.01 though literary putting in 2 dots of green with not even the screen coated and getting a small cloud.
Im kinda lost besides thinking my TM has an issue as i cant believe a 60$ Dynavap hits much harder with tons of clouds.

Oh also HAPPY NEW YEAR!!!!! :clap::party:

I'd recommend skimming through the thread, using the search feature at the top for beginners tips even, it sounds like you're really just not using it properly, it's nothing like a dynavap... You definitely want to load more than two dots, you actually always want to cover the screen at minimum, inhale hot air through the herbs to create the vapor, a finer grind means more clouds, and yeah I temp step the dial, below 3 up to above 6:tup:
 

HashOnMyMind

New Member
Ok so nothing unusual from the pictures like the oven not centred or the o-ring not properly seating? Maybe i got paranoid from reading half the thread :lol:

Maybe i try start hitting at 7 or 8 but thats probably too hot for me. I experiment some more.

Thanks guys!
 

derosavapore

Solo canotto!
Hi its me again. So after getting a TM for Christmas i have changed the CU a bit with some sapphire/ruby balls i had lying around which feels good although i probably need a few more.

I still dont get good hits unfortunately compared to my Dynavap. Its one mostly wispy hit while the Dyna gives me 2-3 huge hits (without combusting of course)
Its maybe the different inhale? I can drag on the Dyna until the cool-down click comes but its hard to draw long on the TM as its so open that i get tons of air so quick.
I have made some pictures of the oven and the black o-ring. Does everything seem in order?

Man i really wanna love this device. I see a lot of people getting huge hits even of CBD and multiple at that while i can do one hit period. 0 Vapor on consecutive hits even on Temp 4.

Someone described it to me as a Dyna+IH in a compact device which sounded amazing and exactly what i wanted but right now im only using it when i want to test it more but use the Dyna to get huge rips and get medicated.

Its sad to me because i know the TM can do more as ive seen the rips of other people. Maybe its that im using not enough bud? Ive seen people talk about micro dosing in the TM with 0.01 though literary putting in 2 dots of green with not even the screen coated and getting a small cloud.
Im kinda lost besides thinking my TM has an issue as i cant believe a 60$ Dynavap hits much harder with tons of clouds.

Oh also HAPPY NEW YEAR!!!!! :clap::party:
At first, a happy new year to all of you!
Well, I could imagine you draw too hard. Slowly inhaling at the beginning and when you feel some vapor in ya throat you can speed up.
I do no steps and rip it only one time with small loads at temp 6,5.
For me no TM right now, I broke my one and only stem two weeks ago. Now I wait for two up-taster stems.
If I will like them?
The TM is a true fog machine, possibly the hardest hitting portable.
 

cybrguy

Putin is a War Criminal
Not true.
Several outlets stock it in the EU.

Ahhh... I didn't know that. Do they also stock parts?

I noticed today on one of my TMs that repeated tightening of my torx screw has flattened the oring in the stem tube and kind of squirted it into the cavity. I want to get a couple replacements for it but TMs shipping cost is double what a couple orings would cost. Has anyone found this thin oring anywhere out in the wild or at one of these EU vendors, or are we limited to getting them directly from TM? I'm guessing the latter.
 
cybrguy,

dzoinp

TiStems by measure
Accessory Maker
Ahhh... I didn't know that. Do they also stock parts?

I noticed today on one of my TMs that repeated tightening of my torx screw has flattened the oring in the stem tube and kind of squirted it into the cavity. I want to get a couple replacements for it but TMs shipping cost is double what a couple orings would cost. Has anyone found this thin oring anywhere out in the wild or at one of these EU vendors, or are we limited to getting them directly from TM? I'm guessing the latter.

23mm
 

Dio

Sacraponator
Hi guys!

So my friends tinymight button broke. I opened it up and it seems the two soldering points that hold the button in place are broken.
I filled in the return form on the website a week ago. Do any of you guys know how fast these issues are taken care of these days?

Thanks!
 
Dio,

Bad Dog

Yeah I pissed on the rug...... so what
once they contact you and send return labels the process should only be a week, maybe less going on reports I've been reading. the contact email from tinymight might take a little while itself though, been a week so I would send another quick brief email with your order number, any conformation number or whatever from your filed return, just saying broken button need return labels. good luck
 

kokolokokolokon

Well-Known Member
Hello everyone! My TM started to work great after some days of use...now the oring has arrived:rofl:

A question: Is It possible to anodize the bot/top metal plates?
Would be nice to darken the wood and make the plates look like brass or cooper :D
 
Top Bottom