TinyMight Vaporizer

doctapeppa

Well-Known Member
It is here! I am out of town until Monday night, so my wife gets it all to herself for a few days. :rofl:
Will be a fun way to arrive home.

E1-A3-B9-B3-8146-444-E-A0-DC-2-E30242-A2-AF9.jpg
0.jpg

We got ours at the same time and they look so different! I love that uniqueness that natural wood gives these. Super happy.


Edit: after comparing these two pics for a bit there's definitely some camera/color stuff going on because the bags should definitely look identical and they don't. But whatever, they are undoubtedly uniquie. Time to try the function a bit more.
 
Last edited:

RustyOldNail

SEARCH for the treasure...
420 purchases rolling in. Loving this combo, ditanium wpa / OWW Inception j hook. I really like the fact that I can convert my 4 dry stems to wpas now (not a fan of the silicone master adapter for this)


Great, just got the exact same setup.
Unfortunately, I haven’t found the right size orings for the ditanium MP, so it can seat in the TM OG small stem.
 

NimChimpsky

Well-Known Member
Great, just got the exact same setup.
Unfortunately, I haven’t found the right size orings for the ditanium MP, so it can seat in the TM OG small stem.
Nice! Yea I am using the TM stock short stem there with the CU o-rings. Those rings def have slightly different sizes, I found some were too small to secure the MP properly, others fit perfectly though took a little toothpick poking to get even.
 

Max3334

Member
Hi, I have a tm that I feel like the heater hasn’t been that strong. I would get like 1 decent hit at 10 and 1 small one after and abv still had a lot life. I tried to calibrate it I think I was successful 1 and I’m not sure I can’t seem to do it again I followed the step and it does not engage to the white led after the initial 3clics with the green light
 
Max3334,

Shit Snacks

Milaana. Lana. LANA. LAANAAAAAAA
Hi, I have a tm that I feel like the heater hasn’t been that strong. I would get like 1 decent hit at 10 and 1 small one after and abv still had a lot life. I tried to calibrate it I think I was successful 1 and I’m not sure I can’t seem to do it again I followed the step and it does not engage to the white led after the initial 3clics with the green light

If you're not able to fully extract at level 10, sounds like you could have one of the other issues, air seal gap or the battery power connections... Not sure what you might have tried, before attempting recalibration...?
 

Max3334

Member
If you're not able to fully extract at level 10, sounds like you could have one of the other issues, air seal gap or the battery power connections... Not sure what you might have tried, before attempting recalibration...?
If you're not able to fully extract at level 10, sounds like you could have one of the other issues, air seal gap or the battery power connections... Not sure what you might have tried, before attempting recalibration...?
The air gap seal is where the stem
How right and What kind of issues would I be having if it’s the battery power connection.
 
Max3334,

cybrguy

Wear a Mask, Damnit
The following link has some suggestions. I really think the calibration thing should only be done if other troubleshooting methods fail...
 

Max3334

Member
The following link has some suggestions. I really think the calibration thing should only be done if other troubleshooting methods fail...
I just emailed tm about this to see if it can get service.
 

SquirrelMaster

Well-Known Member
420 purchases rolling in. Loving this combo, ditanium wpa / OWW Inception j hook. I really like the fact that I can convert my 4 dry stems to wpas now (not a fan of the silicone master adapter for this)

What a combo!
Pulled the trigger on one yesterday, can’t wait to get it in my hands and put it through it’s paces...Any tips for best results without me searching through 415 pages of posts? Lol
Charge it first then pack it as wide as you can deep. I dump my flower in and barely tamp it if at all. Start low, say temp 4 and work your way up with 10 sec+ draws OR start at 7 and feel it's power. Don't hold back, the heater can keep up pretty good. Stir after the first two hits if you're using a higher temperature, you'll get a feel for it. This vape extracts so well, every hit is fantastic.
 

Shit Snacks

Milaana. Lana. LANA. LAANAAAAAAA
My favorite way to use it is through a water piece in session mode. I was happy enough with mine that I bought a backup.

By the way I used mine in session mode for the first time in a long time, one hit at level five through a hydro tube, turning it off before I finished inhaling to clear the hit. Anyway confirmed what you said about haptics, there is an extra vibration when you turn it on in session mode, so full battery gives you five vibrations instead of the normal four :tup:
 

RustyOldNail

SEARCH for the treasure...
By the way I used mine in session mode for the first time in a long time, one hit at level five through a hydro tube, turning it off before I finished inhaling to clear the hit. Anyway confirmed what you said about haptics, there is an extra vibration when you turn it on in session mode, so full battery gives you five vibrations instead of the normal four :tup:

Funny, I’ve never used my TM on my water rigs, but now that I got that Titanium MP 14mm, goes right in my rigs, and I can leave the stock short stem with the CU intact. So, first time using the TM in session mode, and thought I felt a FIFTH vibration, nice confirmation I’m not totally shot.....

Oh, and thanks for reminding me to try the TM through a hydrotube, I have a14mm female Hubba Bubbler from DT. I just tried the TM with my new Sneaky Pete Mega Globe using a silicone hose, didn’t work very well, so I’m going to the hydrotube next.
 

dzoinp

Well-Known Member
Yeah, I tried my extra RED TM CU orings, a bit too thin. :(
try the smaller ones (mouthpiece) from crafty/mighty
By the way I used mine in session mode for the first time in a long time
Since you speak in session mode ...
Only mention for those who do not know that there is a boost in session mode. just press the button in session and the temperature goes up 1.5 step
 
Funny, I’ve never used my TM on my water rigs, but now that I got that Titanium MP 14mm, goes right in my rigs, and I can leave the stock short stem with the CU intact. So, first time using the TM in session mode, and thought I felt a FIFTH vibration, nice confirmation I’m not totally shot.....

Oh, and thanks for reminding me to try the TM through a hydrotube, I have a14mm female Hubba Bubbler from DT. I just tried the TM with my new Sneaky Pete Mega Globe using a silicone hose, didn’t work very well, so I’m going to the hydrotube next.

Thats disappointing to hear. I have a globe coming soon and was planning on running my TM through it. Though I was planning on using the cooling mouthpiece instead of the whip. though
 
2minTurkish,

RustyOldNail

SEARCH for the treasure...
Thats disappointing to hear. I have a globe coming soon and was planning on running my TM through it. Though I was planning on using the cooling mouthpiece instead of the whip. though

I’m still playing with it. As some previous buyers mentioned, it’s a lot of air volume. Any devices that have restricted draw are hard for me to even fill the Mega Globe with vapor. Tried my glass Dynavap stems, with and without carb hole, better experience using my smaller water rigs.

And while the TM has more wide open free flowing draw, I can’t finish in a single draw. The 15” silicone hose is too short, replaced it with the Herborizer replacement hose 3-feet long with glass connectors. I haven’t tried the glass stem MP. Perhaps if you have great lung power the Mega works better. At least it was on sale.
 
Top Bottom