TinyMight / TM 2

[dimmusp]

Good Vibes has plenty of TM stems available, this one probably hits super smooth and is such a price being all clear:

Tinymight U Hook With Cooling Marbles, Cooling Spikes, And A Tapered Mouthpiece – Store

8 inches in length

goodvibesboro.com

Some really nice looking headies too

Is that the same type/size of U hook that you use with your TM2?

It looks a bit unwieldy. How easy is it to hold it? Can you set the vape down on a table, etc?

Thanks

 

[jbm]

It looks a bit unwieldy. How easy is it to hold it? Can you set the vape down on a table, etc?

It is a bit unwieldy. You can set the TM down flat but it won’t stand.

 

[kilo]

looks a bit unwieldy. How easy is it to hold it? Can you set the vape down on a table, etc?

I've pretty much settled on using the tinymigh.t_bowl WPA with a horizontal sherlock and it's also pretty unwieldy. Since I only use the 'on demand' setting, I've settled on just taking the TM off the WPA and resting the glass on its side, using the handle as a leg to keep the bowl angled up a bit. That's probably the easiest thing to do with the pictured unit as well, unless you want to construct some sort of holder. Since the WPA came with the suggestion that the TM might cool more effectively when upright anyway, I don't consider it that much of an inconvenience.

 

[Shit Snacks]

Is that the same type/size of U hook that you use with your TM2?

I've posted photos with mine here before, mine is actually smaller, shorter, without a bend at the mouthpiece...

It looks a bit unwieldy. How easy is it to hold it? Can you set the vape down on a table, etc?

I don't think the photos are so ideal, because the TM should be turned fully around, that way you hold it easily in one hand, and you can set the TM down on the table on its side flat, with a glass on the other side... Does that make sense? You can see it in the picture I posted of mine... Very easy to set it down and hold it with one hand

 

[dimmusp]

I've posted photos with mine here before, mine is actually smaller, shorter, without a bend at the mouthpiece...



I don't think the photos are so ideal, because the TM should be turned fully around, that way you hold it easily in one hand, and you can set the TM down on the table on its side flat, with a glass on the other side... Does that make sense? You can see it in the picture I posted of mine... Very easy to set it down and hold it with one hand

I think so, thanks!

 

[Dopamine]

What is the biggest bowl you’ve packed and got good complete extraction? Using in on demand.

 

[Rodney]

What is the biggest bowl you’ve packed and got good complete extraction? Using in on demand.

hard to say as only so much can fit in the caps or bowl. I do 0.1g and that all extracts good. I do 0.2g on ocassion and again it extracts good but takes a longer draw.

Anything above 0.2 around will not extract as good as lower amounts the way I do it and blocks the vapour path making less vapour get to you.

Just stick to 0.1 or 0.15 for best results imo.

 

[kilo]

What is the biggest bowl you’ve packed and got good complete extraction? Using in on demand.

There seem to be diminishing returns when it comes to larger loads. When I first got the t_bowl I thought, great, I can load this thing right up, but I noticed that, even with stirring, the extraction was sub-optimal. I think I've been sort of nostalgic about the big bowlfuls I used to pack when I was combusting but I've come to accept a .2 maximum with my vapes.

 

[Dopamine]

I guess that is the realty we have to accept. Although it still ain’t so bad.

 

[Durbandream]

What is the biggest bowl you’ve packed and got good complete extraction? Using in on demand.

I don't know what the exact size is but with a WPA or their 15-ball stem I can completely fill the bowl and get full extraction. My other stems just get too hot to finish that way.

 

[Dr. G]

Greetings Everyone, I just signed up for a chance to purchase the Purple Heart version of the Tinymight 2. It is gorgeous. Just a heads up to those of you who wanted to have one...Sign up.

Go to their website...the announcement is there.

 

[LAWTHEONE]

https://imgur.com/a/QEh5547

Beast

 

[Eblaze1992]

When I purchased my tiny might 2 they were still offering a 10-year warranty. I'm assuming my warranty is grandfathered in. Has anyone reached out and know for sure?

 

[Grass Yes]

When I purchased my tiny might 2 they were still offering a 10-year warranty. I'm assuming my warranty is grandfathered in. Has anyone reached out and know for sure?

A couple of people have asked about this, but if I were you I would reach out to TM to verify this particular device is covered.

 

[jbg87]

When I purchased my tiny might 2 they were still offering a 10-year warranty. I'm assuming my warranty is grandfathered in. Has anyone reached out and know for sure?

I think you had to register it by a certain date to get the 10 year warranty locked in, and any registered after that date would be getting the new warranty.

 

[MrGreenspoon]

When I purchased my tiny might 2 they were still offering a 10-year warranty. I'm assuming my warranty is grandfathered in. Has anyone reached out and know for sure?

When I bought my TM2 in 2022 you had to register your device within 1 year after delivery and before the end of December 2023 to get the 10 year warranty.

I registered 2 devices and the status is still pending and „warranty expires on“ says „n/a“.

So I think as Grass Yes said asking them is the only way to know.

 

[El Duderino]

I didn’t specifically ask them about the 10 years but regarding the status their answer was the following:

Hello! Warranty is considered active regardless of the status ,once the info is entered to the system. Please do not worry about it and have a nice day !

 

[Rodney]

I didn’t specifically ask them about the 10 years but regarding the status their answer was the following:

Hello! Warranty is considered active regardless of the status ,once the info is entered to the system. Please do not worry about it and have a nice day !

They told me the same thing when I enquired about the status as pending. They said do not worry about what the status says as long as you enter the details it is all good.

 

[sashka69]

Purpleheart is ready. Got my mail and bought one immediately.

I really enjoy the upgrades. Especially the new heater, I'm curious to compare to my tm2 I bought in February.

"zirconia ceramic and the support rods of the heater are more than double strength compared to the earlier design"

Let's see when it's here in my hands.

 

[dimmusp]

Unfortunately, €400 (+€21 for shipping within the EU) is verging on abusive pricing... They could have thrown in free shipping at least

 

[Vaporific]

Purpleheart is ready. Got my mail and bought one immediately.

I just got the email today too. I will order from home (out now).

Here’s the end of the email:
“As the release of this model has taken much longer than we ever expected, and to respect the patience of many of you who have waited long time for this:
We will include a little gift with each purchase, an additional long stem with glass balls, so there will be now total of 3 different stems included.”

I’m stoked! What they told me in a precious email is this:
“we are waiting to try a zirconium alternative to the glass part around the heater and mark new milestone in the improvement of the concept . We really hope things to work out with this new part and create something that is truely drop restant. Of course Zirconium can also break but it is 20 times stronger than glass,so this would be a huge improvement . “

All good! ))))))))))))

 

[MoltenTiger]

The TM2 is certainly not cheap but mine has held up super well and has proved to be quite robust despite missing the new durability upgrades

It really has been an amazing device and has had heaps of use and survived so far all drops and being flung off my passenger seat. I saw curtains but for once luck was on my side. These heaters work hard and deal with a tough life. Not much is really going to survive this shit forever. I'll gladly purchase again if necessary.

It's awesome they have kept up with passionately fine tuning this marvelous creation, a big pattern of getting things right - rare to see with vapes

 

[Dr. G]

Greetings and heads up...the Purple Heart is NOW AVAILABLE. I remember many of you wanted one. I just ordered mine!

 

[invertedisdead]

I’m having dejavu

 

[Dr. G]

Did anyone else order the Purple Heart? Tinymight is just so perfect so well made...