Md_Hybrid
Stuck under a 🪵
I received them today, as you can see they'll hold a little more than the original baskets which was a nice surprise.
Last edited:
TinyMight / TM 2
- Thread starter kuzko
- Start date
PDwasmy1st
Well-Known Member
tear a piece of rizzla off and wrap it around the metal tanks where they join enough of a buldge in the rizzla as to keep it from moving inside the glass mouthpiece , which is the job the orange rubber ring did , i think there were 2 in there? i took both out never used themEven though English isn't my native language, I'm not bad a it and i can't figure out at all what you're describing neither. And I read it a few times.
I have so many questions. WTF is rizzla? It might be a brand of rolling papers? Are the "metal tanks" the cooling unit? How is this better?
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Yeah possibly a quick inspect. There was no signature required but had a big sticker mentioning customs inspection with an arrow. I have never had one, I’m excited to try it but have a really low tolerance.
Awesome, quoting you in the main thread to reply, I do recall having a customs inspection notice on something once too?? Anyway I would suggest you start with the low temps, long slow draw, you don't need to load much, but that should help you manage with the tolerance a bit
Just compared it to the Mi and it’s way smaller, and the stems fit! I ordered some HA 4 pill stems that should be here tomorrow.
Nice, yeah I just love using it with interior basket screen plane in backwards RBT stem as WPA through hooks or other dry glass...
I'm not sure, other people posted about using session mode for burn offs, I'm not sure if I would so much, I don't think it would need that much burn off and you wouldn't want it to be running too long on too high ideally, but I'm sure it's safe that's just me
Vapetrees
Vaped Out
It just smells funky. Can’t describe the smell but I don’t like it. Maybe it’s the oring smell inside where the stem goes? Maybe just new device smell?
CleanHippie
Well-Known Member
Looks great ! It is funny cause i was just thinking about that today and was going to propose it to the maker). I would really add some extra art looks to its simple beauty.
I want mine in seemless flower of life pattern <3 !
Imo walnut is not the best wood for etching because it is so dark and the black lines get lost in the grain
I would love to have a flower of life pattern on my TM2 once it arrives, so beautiful!
Does anyone offer a service like this?
Md_Hybrid
Stuck under a 🪵
Did you take the "bucket" out and clean it with ISO first?
Vapetrees
Vaped Out
Not sure what you mean.
I’m a noob at this. I can take out parts by the heating chamber?
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Not sure what you mean.
Unscrew the top ring, you can then pull out the o-ring, and pull out a metal tube, to clean them all for yourself. You can also gently clean the inside upside down with lightly dampened q-tip iso, and let everything air out, that usually helps things neutralize.
Elfstone
Mew
From who did you purchase them, how many at what cost if I may ask?I received them today, as you can see they'll hold a little more than the original baskets which was a nice surprise.
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Look above the text in his post, he quoted the post with the link lol this thread is so long bc not enough people take the time to read all of it bc it is too long
fangorn
Well-Known Member
if you want to send it to me at my post office box... I can take care of it for you!
just insert 2$ with the tinymight for the service, I'll settle for it! I would like you to add the stems too... so that I can soak up the atmosphere of the vaporizer, so that the engraving is well connected!
and... no need to give me your address for the return... I'll manage
(sorry, that was too tempting!!!)
Momor
Well-Known Member
Yes rizzla is a brand of rolling papers and i also think the metal tanks are both parts of the CU. It seems to act as an o-ring in the middle cooling unit but it's not made of silicone, that he wants to avoid iirc.
Ok, understood. If you're using the original assembly of the cooling unit I think that you may lose a little bit of airflow doing this because you're feeling a part of the gap between the parts of the CU where air travels.
As long as you're happy with the result, that's what matters.
Elfstone
Mew
Thank you for the link, l just placed an order with Etsy for 20 at $11.99I received them today, as you can see they'll hold a little more than the original baskets which was a nice surprise.
https://www.etsy.com/se-en/listing/496354191/pipe-screens-6mm-x-12mm-14x-12-5 I feel 20 are to last for quite awhile
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
OK, had to skip a few pages but I'm back in here reading again. Don't anyone tell TinyMight. I wouldn't want them to feel overconfident...
Just live vicariously through me buddy, any surprise I caved to ordering walnut TM2 planning to get red later as well?? But I have to be honest, I've been using my original, really no complaints, so I don't think you're going to feel too much pressure yet, eventually I'm sure you'll grab one, will be nice for the fully polished evolution, but for your needs probably fine without, I guess I am trying to be a good influence for once!
RustyOldNail
SEARCH for the treasure...
Dr. G
Vapman Collector*Vapman Beta Tester
I use mine everyday...no smell. The padding is outstanding.
noobvaperct
Well-Known Member
That's literally what any forum-based website is. Mods can sticky and monitor, but the same questions for any topic will always get asked, always.Indeed, not a “thread” anymore. Unfortunately, It’s a repetitive Q&A page…..
RustyOldNail
SEARCH for the treasure...
Geez, I learn something new every day….
There’s also something called the “SEARCH” feature, which I LEARNED how to use, so I could perhaps FIND the ANSWER, before posting yet another QUESTION, that had already been ANSWERED!
cybrguy
Putin is a War Criminal
Heh heh. No surprise. But your point is correct. I have barely used my backup because my first one still works great. Yeah, I've had to tighten it a few times and once jiggle the haptic motor, but generally a fine product that I use every day and still works mostly without issue. A third would really be guilding the lily for me even tho it has some improvements.Just live vicariously through me buddy, any surprise I caved to ordering walnut TM2 planning to get red later as well?? But I have to be honest, I've been using my original, really no complaints, so I don't think you're going to feel too much pressure yet, eventually I'm sure you'll grab one, will be nice for the fully polished evolution, but for your needs probably fine without, I guess I am trying to be a good influence for once!
We'll see what the future holds. Maybe I'll feel the need to give one to my brother...
noobvaperct
Well-Known Member
Agreed, it's probably more work to make a post versus search, lol.Geez, I learn something new every day….
There’s also something called the “SEARCH” feature, which I LEARNED how to use, so I could perhaps FIND the ANSWER, before posting yet another QUESTION, that had already been ANSWERED!
Vapetrees
Vaped Out
DaVapeGuy
Well-Known Member
Is this a legit site/battery for tm?
www.imrbatteries.com
Molicel P26A 18650 2600mAh 35A Battery
Looking for a high-performance and reliable 18650 battery? Check out the Molicel P26A. With a capacity of 2,600 mAh, a maximum continuous discharge rating of 35 amps, and a long cycle life, this versatile cell is perfect for a range of applications, including high-performance flashlights, power...
www.imrbatteries.com