TinyMight / TM 2

invertedisdead

PHASE3
Manufacturer
"Tinymight has two usage modes which is easily selectable when you turn the unit on. When started in "on-demand" mode, the vape heats up when the button is held pressed, and when button is released it goes back to standby. In session mode, the vape heats up automatically and stays at a stable temperature level until turned off."

"Tinymight has an adjustable temperature dial on the bottom panel. It has 10 steps with half steps in between, so a total of about 20 different temperature settings are available between the range of 120 - 240 degrees Celsius. It is fully temperature controlled with extremely accurate electronics controlling the heater in real time."

Pretty neat, looks kinda like a regulated Milaana
 

Baron23

Well-Known Member
Yes, I too find it interesting but not nearly enough info.

They don't show the chamber and how its loaded so I don't know if this is a "load the tube" type vape or "load the oven" type vape.

Need good pics of the oven and whatever that is sticking up into the glass stem.
 

chlorophyll_man

AVB Inspector
whatever that is sticking up into the glass stem
Hiya, I think that's probably the stainless steel cooling unit mentioned in the specs.

'Parts that require cleaning from time to time are the glass tube and cooling unit within, and sometimes also the stainless steel mesh that protects the heater. Glass tube with cooling unit can be rinsed with hot water and detergent, or submerged in solvent such as isopropyl alcohol. The internal parts are easily removed by opening a threaded ring in the front panel, and the parts slide out easily.'

Sounds like an internal oven/bowl then.
EDIT: Instagram photo of the instructions looks like the loading chamber is actually in the tube, sorry.
 
Last edited:

Zangano Cruel

IG zan.cru (code) zancru (5% NV checkout discount)
Very interesting one.
I just checked their IG page.
By the looks of it, seems like a insert in the oven, Solo style stem.
Cooling unit, might be hold in place, by a slight tampering, of the unit itself??
Looks like that bowl, can be “pod style” too??
@Tinymight

Cooling unit sits on top of bowl, and can be seen through the stem, in the photos...

Stay vaped!!!
Mantente de la mente!!!

AED1-F46-B-540-C-4281-BC11-D826-DA75-D5-FC.jpg
 

PPN

Volute of Vapor
Www.tinymightvape.com

Anyone try out one of these yet? Haven’t seen much info but the website says it’s convection heat, on demand or session, with fast heat up and replaceable battery.
Looks like something I would buy!

Not a lot of infos but pictures speak themselves about building quality... and the pricetag is decent.

Would like to read some user feedback before to take the plunge!
 

Abysmal Vapor

Supersniffer 2000 - robot fart detection device
Already shot them an e-mail with questions and invitated them to join onboard . I dig the looks,like something sold in IKEA ,lol..
My main wonderings are bout the heater .High mass sounds intersting ,but also cruise is mentioned. I wonder how does it achieve the TC. Is the temp calculated via TCR,or there is a probe/sensor,thermostatic or just analog power presets ? Low battery protection ?
How is the stem held to the units since there are no o-rings or ground joints from the looks/writings ?
 

flammy

Well-Known Member
I've had a chance to chat with the owner a few weeks back and I invited him here too...nice guy. I think he is just trying to get all of his ducks in a row before making a formal intro.

I am very intrigued by this as well and also wanting to hear more feedback. I believe that there are a few units in the wild but I haven't heard a single thing from those folks yet unfortunately.
 

stickstones

Vapor concierge
Now that the word is out...I've had a test unit for a few months now, and I'm impressed. I made some suggestions, and don't know what he is shipping out currently. But, this thing has a lot of on-demand calories, and a session mode. I feel like I can trumpet this unit like I did the Tubo when it first came out. It's a big hitter with some cool features!

I don't have much more to say until I see a production unit, because he was going to make some significant changes to the unit I got. But, in terms of performance, I think this is a safe buy. Easily one of my top 10 portables, maybe even top 5, when it comes to heavy hits. I can't share anything about the heater yet, but it's different and similar to stuff already out there, and very potent.

My main drawback is the glass stem that doesn't easily travel in a pocket. But, if you like the Arizer/Milaana stem style vape, this one rocks!
 

Verax

Well-Known Member
This thing looks cool. Would love to see some usage vids, but even without that, I'll probably grab one.

I've blown my proverbial load on vapes already, at least for another couple weeks, but this looks like something I would love to try out. On my short list for future vapes for sure.
 

Zuhdj

Charles Mingus
Now that the word is out...I've had a test unit for a few months now, and I'm impressed. I made some suggestions, and don't know what he is shipping out currently. But, this thing has a lot of on-demand calories, and a session mode. I feel like I can trumpet this unit like I did the Tubo when it first came out. It's a big hitter with some cool features!

I don't have much more to say until I see a production unit, because he was going to make some significant changes to the unit I got. But, in terms of performance, I think this is a safe buy. Easily one of my top 10 portables, maybe even top 5, when it comes to heavy hits. I can't share anything about the heater yet, but it's different and similar to stuff already out there, and very potent.

My main drawback is the glass stem that doesn't easily travel in a pocket. But, if you like the Arizer/Milaana stem style vape, this one rocks!
What it seems like (to me) is grasshopper esque performance or milaana esque performance(depending on the mode) with a milaana looking package and 18650 batteries (yay). If I went and bought one would you say this is about what I could expect? I was gonna get a tubo but they don't sell them anymore and its aio conspicuous. Pull the trigger or no?

Basically what I'm trying to say is I have a crafty a grasshopper a simrell vortex and an sbj. and I once had a miqro and an edge. Will this fit in with these vapes or will it be a downgrade? I'd be using it for sharing, for sessions to change it up from the crafty (or when the crafty is charging) and on demand when I don't have water (I don't use the grasshopper dry). Is this finally the vape I've been looking for? Lol
 
Last edited by a moderator:

invertedisdead

PHASE3
Manufacturer
Now that the word is out...I've had a test unit for a few months now, and I'm impressed. I made some suggestions, and don't know what he is shipping out currently. But, this thing has a lot of on-demand calories, and a session mode. I feel like I can trumpet this unit like I did the Tubo when it first came out. It's a big hitter with some cool features!

I don't have much more to say until I see a production unit, because he was going to make some significant changes to the unit I got. But, in terms of performance, I think this is a safe buy. Easily one of my top 10 portables, maybe even top 5, when it comes to heavy hits. I can't share anything about the heater yet, but it's different and similar to stuff already out there, and very potent.

My main drawback is the glass stem that doesn't easily travel in a pocket. But, if you like the Arizer/Milaana stem style vape, this one rocks!

Thoughts on the "cooling unit?" in the mouthpiece? Does it eliminate scooby snacks like those Arizer stems tend to get? How pure would you say the flavor is?

This vape seems pretty sweet, I like the simple mechanical type layout a lot. Though it seems like the temp adjustment on the bottom might not be ideal for people who like to temp step throughout the whole session.

The manual mode is still responding to TC, correct? It's not manual like a Milaana?

Like the idea of being able to use this on demand or in a session without messing with box mod software.
 

flammy

Well-Known Member
Now that the word is out...I've had a test unit for a few months now, and I'm impressed. I made some suggestions, and don't know what he is shipping out currently. But, this thing has a lot of on-demand calories, and a session mode. I feel like I can trumpet this unit like I did the Tubo when it first came out. It's a big hitter with some cool features!

I don't have much more to say until I see a production unit, because he was going to make some significant changes to the unit I got. But, in terms of performance, I think this is a safe buy. Easily one of my top 10 portables, maybe even top 5, when it comes to heavy hits. I can't share anything about the heater yet, but it's different and similar to stuff already out there, and very potent.

My main drawback is the glass stem that doesn't easily travel in a pocket. But, if you like the Arizer/Milaana stem style vape, this one rocks!

This is definitely on my list but I've heard elsewhere that he has taken in feedback and making tweaks. If the maker was stateside, I probably wouldn't mind pulling the trigger early but a little more hesitant since firmware upgrades, etc will be tougher given the vape's Finnish origin.

I'd love to see some function vids (or just one) and a heads up on when final productions units roll out. To be clear, I have no idea if the current version offered is the final version or not but announcements/info provided to the gen public has been a little sparse. To be fair, I think this is a one man show and he has a lot on his plate right now.

Hearing a comparison to the Tubo however does make this seem very promising.
 

Alex3oe

Accessory Maker
looks quite interesting, maybe Santa will have some in his sack this year for us :science:
 
Alex3oe,
  • Like
Reactions: Verax

stickstones

Vapor concierge
The cooling unit works...cools the vapor and keeps bits out of your mouth. I don't know what the final cooing unit will look like, but it slides up and down so you can adjust bowl size.

The temp adjustment works whether it's on-demand or session...it's not a manual vape.

Heater is spiral like lil bud, but still different.

I also think it's a one-man show, so keep supply and availability expectations in check.

I don't know if he's selling them yet, and if he does, what improvements he has already included.
 

Verax

Well-Known Member
The cooling unit works...cools the vapor and keeps bits out of your mouth. I don't know what the final cooing unit will look like, but it slides up and down so you can adjust bowl size.

The temp adjustment works whether it's on-demand or session...it's not a manual vape.

Heater is spiral like lil bud, but still different.

I also think it's a one-man show, so keep supply and availability expectations in check.

I don't know if he's selling them yet, and if he does, what improvements he has already included.

Good stuff, thanks @stickstones !

Looking forward to hearing / learning more about this one
 

mephisto

Well-Known Member
Being from Finland, could this be a spin-off from the maker of the Apollo? It sure looks like similar
character with regard to the mattte 'finnish" and the trim work. If Sticks puts it in the top ten, and calls it a heavy hitter, thats enough for me to take a bite. I got away from the plastic vapes only to be completely consumed by artisanal wood craftsmanship. Man, I thought I was good for awhile. VAS is fucking flaring!!!!
If I had kids, they would be hungry little bastards.....
 

Zuhdj

Charles Mingus
Being from Finland, could this be a spin-off from the maker of the Apollo? It sure looks like similar
character with regard to the mattte 'finnish" and the trim work. If Sticks puts it in the top ten, and calls it a heavy hitter, thats enough for me to take a bite. I got away from the plastic vapes only to be completely consumed by artisanal wood craftsmanship. Man, I thought I was good for awhile. VAS is fucking flaring!!!!
If I had kids, they would be hungry little bastards.....
You gonna get one?
 
Zuhdj,
  • Like
Reactions: ataxian
Top Bottom