TinyMight / TM 2

onesixty2

Well-Known Member
K
HA galaxy?
Yeah, Galaxy. Has some good blue-green shades when you look at them close up. Light passing through makes a warm amber glow.

So far both are pretty good! One bowl of CBD each at 6.5. Decent cooling on the HA nearing the end of a session the glass against my lips did feel a bit warm but nothing near as bad as the Grav Upline / octo without added beads. The GVB was definitely cooler overall which was to be expected due to both its length & additional airpath obstruction. Both good pieces to have for variety flavor to me, a different stem always feels nice to rotate through, and I'm happy to say I've got an Ed's, HA, and GVB setup. I love my TM2 and all the artists supporting it.
 

Shorner

Well-Known Member
Yeah, Galaxy. Has some good blue-green shades when you look at them close up. Light passing through makes a warm amber glow.

So far both are pretty good! One bowl of CBD each at 6.5. Decent cooling on the HA nearing the end of a session the glass against my lips did feel a bit warm but nothing near as bad as the Grav Upline / octo without added beads. The GVB was definitely cooler overall which was to be expected due to both its length & additional airpath obstruction. Both good pieces to have for variety flavor to me, a different stem always feels nice to rotate through, and I'm happy to say I've got an Ed's, HA, and GVB setup. I love my TM2 and all the artists supporting it.
I have a Galaxy too....I would like to try other stems from other makers but the postage to UK is just ridiculous 🙄
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
I have a Galaxy too....I would like to try other stems from other makers but the postage to UK is just ridiculous 🙄

As I said above, if you're talking about GVB, have you tried reaching out to him? That is necessary to get the accurate international shipping rates unfortunately, site problems (though UK shipping could be special bad?)
 

alex91

Well-Known Member
Those of you canadians who ordered the TinyMight 2, were you charged any duties/taxes? And how long did it take for your order to arrive?

Also, what grinder would you recommend for it? I have my eyes on the Raw Life v4 Grinder, but it’s a coarse grind. Another option is the BCG. In that case, which plate would you recommend?

Thanks.
 
Last edited:
alex91,
  • Like
Reactions: Elfstone

Shorner

Well-Known Member
As I said above, if you're talking about GVB, have you tried reaching out to him? That is necessary to get the accurate international shipping rates unfortunately, site problems (though UK shipping could be special bad?)
I can't be doing with jumping through hoops to be honest, I like to visit a website put things in a basket and use PayPal...I'm lazy 🤣
 

vapeape77

Well-Known Member
Would love it if TM offered the Ti stem in the shorty version, feel this would matchup better in public with my TRWW mp. I’m sure it’s because the titanium heats up too much or a lack of demand….

Anyway I have two shorty glass so all good, just baked 6 TM rimmed baskets on the go walking with good flavor and clouds running session mode at lower temps.

Edit: by the way, the “official” rimmed TM baskets don’t fit all of their standard glass. In one of mine only 1 of 8 rimmed baskets fit it without falling out, but the other fits fine ( Ti and Grav work too).
 
Last edited:

lordpilko

Well-Known Member
I see a lot about the OGB jhook. However seems its not eay to get in thr EU. Anyone know of a decent jhook easily accessible in the EU?
 
lordpilko,
  • Like
Reactions: dimmusp

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
I can't be doing with jumping through hoops to be honest, I like to visit a website put things in a basket and use PayPal...I'm lazy 🤣

I mean, then that's your loss to be honest, if you are in the UK trying to order stuff from other countries, and can't be more flexible, then yes you're going to be quite limited in what aftermarket pieces you can acquire

I see a lot about the OGB jhook. However seems its not eay to get in thr EU. Anyone know of a decent jhook easily accessible in the EU?

Yeah this is the one made by someone else in France that is pretty similar style:

Or you can get the cheap version from DHgate linked in here and elsewhere
 

Cheebsy

Microbe minion
Would love it if TM offered the Ti stem in the shorty version, feel this would matchup better in public with my TRWW mp. I’m sure it’s because the titanium heats up too much or a lack of demand….

Anyway I have two shorty glass so all good, just baked 6 TM rimmed baskets on the go walking with good flavor and clouds running session mode at lower temps.

Edit: by the way, the “official” rimmed TM baskets don’t fit all of their standard glass. In one of mine only 1 of 8 rimmed baskets fit it without falling out, but the other fits fine ( Ti and Grav work too).
Message @dzoinp he can do you a ti stem in pretty much any size I think 👍
 

los

Well-Known Member
Nice! I think he is literally in process of loading them up now lol good timing
I was testing out the stem I just bought from him, and it really takes the tm experience up a few levels. 5 cooling balls and cooling spikes, appx 4”.
Took a deep pull and I was hooked, I had to check if he had put some new stuff up.

I’m definitely getting a few more pieces from him besides the 2 I’ve already picked up. It’s like R&D for the upcoming customs Im going to order.
 

Zuhdj

Charles Mingus
So I've tried vtc6, p28, and 30q batteries and my Tinymight will not get to a temp that actually works. I've cleaned the contacts. I'm very close to calibrating the heater and maybe even sending the vape in, though I'd really rather not pay 75$ to fix I vape that just stopped working out of nowhere. What now?
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
So I've tried vtc6, p28, and 30q batteries and my Tinymight will not get to a temp that actually works. I've cleaned the contacts. I'm very close to calibrating the heater and maybe even sending the vape in, though I'd really rather not pay 75$ to fix I vape that just stopped working out of nowhere. What now?

If it just stopped working out of nowhere, the way to fix it would not be recalibration... As I've said in the past. If you determined it's not any possible battery issue, o-ring airflow or bent disconnected thing, no drop damage from you... Then no reason you would have to pay $75 to have it fixed under warranty...
 

badbee

Well-Known Member
So I've tried vtc6, p28, and 30q batteries and my Tinymight will not get to a temp that actually works. I've cleaned the contacts. I'm very close to calibrating the heater and maybe even sending the vape in, though I'd really rather not pay 75$ to fix I vape that just stopped working out of nowhere. What now?
If this is a unit that was working and now seems not to it is likely a problem with the electrical path. Look in this thread for instructions on how to clean the battery cap, bend up the internal battery connection on the PCB and clean and/or shim the metal strip that connects the top plate to the PCB. Recalibrating is likely not the correct fix.

Edit: Also check for air leaks, remove the top retaining ring and the o-ring and sleeve below it, clean them and reinstall, make sure o-ring look centered and symmetrical, not overly flattened or ripped.
 

Shorner

Well-Known Member
I mean, then that's your loss to be honest, if you are in the UK trying to order stuff from other countries, and can't be more flexible, then yes you're going to be quite limited in what aftermarket pieces you can acquire
I could also say the same for the sellers.....some of those postage costs are never right for a piece of glass that weighs nothing...if they can't be assed to sort their postage costs on their websites then they are limiting the business they get.
 

Zuhdj

Charles Mingus
If this is a unit that was working and now seems not to it is likely a problem with the electrical path. Look in this thread for instructions on how to clean the battery cap, bend up the internal battery connection on the PCB and clean and/or shim the metal strip that connects the top plate to the PCB. Recalibrating is likely not the correct fix.

Edit: Also check for air leaks, remove the top retaining ring and the o-ring and sleeve below it, clean them and reinstall, make sure o-ring look centered and symmetrical, not overly flattened or ripped.
i have done these things already. Thus my mild frustration with the whole thing
 

GoldenBud

Well-Known Member
i have done these things already. Thus my mild frustration with the whole thing
I hate to calibrate things without screen, *hmmm... if people asked what TM3 should have, definately some kind of screen..but who knows, it's expensive..

anyway, how to calibrate : (Thanks Tweakz)

“Please make sure that the screen is not falling on the heater.
You can adjust the temperature range easily:

1) first of all, remove the battery lid and insert it again to reset

the device

2) turn the temperature dial to minimum position

3) make a successful triple click as if you were trying to turn it on.

The.unit should give you short burst of vibrations and not start as

the temperature is set to the lock position

4) wait 2 seconds

5) repeat the triple click successfully, until you have done it

EXACTLY five times.
IF you were successful, the unit will start to vibrate continuously and you will have a white color of light coming from the back of the device.

6) Now turn the temperature dial to 0-10, when 0 -minimal temperature setting , 6 default , 10-maximum temperature , and turn on the device with a triple click.

7) To save this setting press and hold the button until all vibrations have stopped.”
 

Thumos

Well-Known Member
Here’s those Grav mouthpieces I ordered, decent glass imo, plus let’s me mix in other stems.


Love it! I got impatient and put a couple grav octos together with some heat shrink. A nice cooling stem on this TM2 has me 100% satisfied. I cannot believe how much nicer this whole setup is than smoking. I've gotten some great guidance and advice here. I wish the whole world could be as friendly and helpful as my cannabis fam. Blessings!

 

Oil420FL

Well-Known Member
TM @ 9, with a preheat of 4 sec, on-demand (wooden WPA), fast draw, I understand now why people say it can replace the FP.. I was seeing visuals with my eyes closed..
So TM2 @ 6 through water with a steady 12-second draw won't get me visuals with my eyes closed? ;-) I'll try the 4-second preheat. And I guess I need to follow the advice about charging the batteries more often, since I'm seeing only wispy vapor when they're about half discharged
 
Top Bottom