TinyMight / TM 2

WalkBoii

Member
Hello, has anyone had their silent mode not turn off? I took out my battery and put it back in and still no vibration. Any help would be appreciated!

Nevermind I got it lmao
 
Last edited by a moderator:
WalkBoii,

dzoinp

Well-Known Member
Accessory Maker
After 6 months... time for cleaning and waxing(one coat)
dirty threads cleaned too
image.jpg

edit: photos with the right light...
g27tO62GfQnuf465C6DhayhbYWBQMe4ZpPav0RBFid5gK06Ms0Yk2ACmF8NyHfXwYcvmgx7CtFXURdSR5LKVZ5zad-izZx_V2qyscuUCl_ZqV-6ny1CFE4AclWSbE40I5nbGUtaiZ6FehaloKhr843SKgZwcexhZwhSY5myyrNwz9r1krZDdDYUhZFd95i6zb7Qo-vgxhsbgsIOsgaLvyyKKx1DUtAvO7DrUshjytR96DLqtzzluy2xGSCt0W4z-ti7EjZoVFEsDmK7s4D1fnchYhJ2qeBZSdPQYm1uRyFSbPmgzCGadj992FvMT4ZEQdndIeaajGa8NPn-W_tNPAfDQuAQgky5AnpV0cTIferG1sziUmR8nj86sGeaRcOPYrJYGWoCdC9RqT79LSBpIqnZNLYHny8wZNev7HkSI5nKM_kGVYbf2zcR81YTjfX7OsOWPgvjhjTkjMZYBrC0FPBfowEedKmjHMfreMY48aQ9PUC2KOZgKL6hB8F0lMFnk3jHGsUXXLTygiTfgyTdL9DvpDqY5GmItnHmXWZorDvVcmSaW33K2-HgveMSnTXcaiokiUaYX7z0onXyWVr_z2YIqtPhU0U1-MWGVEVYZA1K8YRK2gFQF5h2FSkQEQHC5XHt1Tx1013En3pQ4mrwbrngql2bxnp7vkeIE4UgtQLHLpeYPydDrBMUzcVtS=w662-h881-no

image.jpg

🇵🇹
 
Last edited:

Chomu

New Member
i just got my tinymight today and have been vaping some hemp flower, is it me or after 2 hits the flavor goes away and starts tasting like corn/burnt popcorn. My AVB always looks pretty even and slightly dark brown so its not combusting either. Its my first vape so not sure if thats the normal experience
 
Chomu,
  • Wow
Reactions: Tweakz

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
i just got my tinymight today and have been vaping some hemp flower, is it me or after 2 hits the flavor goes away and starts tasting like corn/burnt popcorn. My AVB always looks pretty even and slightly dark brown so its not combusting either. Its my first vape so not sure if thats the normal experience

I presume you are on a temperature above six? Also when you say hemp flower, I don't know if you mean some sort of low-grade CBD type herb because that would also explain the taste lol Try letting go of the button sooner and keep drawing after too
 
Shit Snacks,
  • Like
Reactions: abcd5432

Chomu

New Member
I presume you are on a temperature above six? Also when you say hemp flower, I don't know if you mean some sort of low-grade CBD type herb because that would also explain the taste lol Try letting go of the button sooner and keep drawing after too
Yea im using temps above 6, and i am vaping CBD herb from Hemp Hop which is considered top shelf so i dont think thats it. Ill try lowering the temps and drawing less
 
Chomu,

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Yea im using temps above 6, and i am vaping CBD herb from Hemp Hop which is considered top shelf so i dont think thats it. Ill try lowering the temps and drawing less

I have no idea what hemp pop means, but I've gotten nice CBD herb here in Cali and it still did not taste as good as regular herb in my experience... I mean everything is always hit n miss, sometimes it's good weed but it just tastes bad! I usually go for the fruity flavors myself... Anyway yeah definitely try starting at lower temps, I milk the low temps starting below level 3 typically, and yeah it's not drawing less it's less time on the button, less time activating the heater since it will retain some heat so if you let go of the button and keep drawing you will get a nice, smoother hit and more controlled extraction.
 

dzoinp

Well-Known Member
Accessory Maker
tks @Rollingstoned :wave:
the mod screen it's not for everyone...:mental:
I think it makes it easier, especially for anyone who stirr the material for full extraction, avoids the darker ring too... and doesn't need any care or maintenance than the stock screen:nod:

yestarday, when i was blowing the air intake holes, with my compressor, the top inner clear o-ring, jump out the unit... :doh:
@Vaporific , i manage to insert the o-ring in place without any disassemble! easy... try that with a smal screwdriver;)


ah! and ... for those who serve the shell:
vaping with lots of test tubes is not for me ... I'm not a scientist.:science: I work and need practical and fast things on the go
🇵🇹
 
Last edited:

fareast

Well-Known Member
Yea im using temps above 6, and i am vaping CBD herb from Hemp Hop which is considered top shelf so i dont think thats it. Ill try lowering the temps and drawing less
I find that a lot of "quality" CBD is pretty blah tasting. There are some exceptions (Tangie CBD from CBD Hemp Direct), but I think the focus in the current stage of CBD breeding is on CBD production and that flavor is, for now, a secondary consideration.
 

Vaporific

All who wander are not lost...
Hi all. I need to buy more Cooling Unit orings and I’m not placing another accessory order with the TM dude (Maker :) ) as I have one en route already (and the extra clear ones he sent are a bit narrower than the red ones in which I only have the orifinal. I found this way back: https://fuckcombustion.com/threads/tinymight-vaporizer.44563/page-37#post-1439569

Can someone who’s bought them externally confirm the correct size?

Regarding CBD increased production would be great and also increasing CBD percentage in strains would be welcome by many. Here in Grassachusetts, most rec dispensaries have very few CBD heavy strains though that’s starting to increase as I saw a new dispensary’s menu yesterday with a few above 5%, which is a lot from my observations. I’m sure on the West Coast (incl CO) it’s a bit different and also for MMJ users who usually have access to strains that rec users don’t (that’s a local thing by me anyway). And for the record I haven’t used pure or high content CBD but I’ll try anything once, especially in the Tinymight :). :peace:
 
Vaporific,

Siebter

Less soul, more mind
Hi all. I need to buy more Cooling Unit orings and I’m not placing another accessory order with the TM dude (Maker :) ) as I have one en route already (and the extra clear ones he sent are a bit narrower than the red ones in which I only have the orifinal. I found this way back: https://fuckcombustion.com/threads/tinymight-vaporizer.44563/page-37#post-1439569

Can someone who’s bought them externally confirm the correct size?

Those would replace the red o ring above the aluminum cylinder / under the aluminum ring, not the ones from the cu.
 
Siebter,

Vaporific

All who wander are not lost...
Those would replace the red o ring above the aluminum cylinder / under the aluminum ring, not the ones from the cu.
Oh, OK. Thanks. I have an extra one of those. I’m looking for CU oring replacements. :peace:
 
Vaporific,

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
tks @Rollingstoned :wave:
the mod screen it's not for everyone...:mental:
I think it makes it easier, especially for anyone who stirr the material for full extraction, avoids the darker ring too... and doesn't need any care or maintenance than the stock screen:nod:

yestarday, when i was blowing the air intake holes, with my compressor, the top inner clear o-ring, jump out the unit... :doh:
@Vaporific , i manage to insert the o-ring in place without any disassemble! easy... try that with a smal screwdriver;)


ah! and ... for those who serve the shell:
vaping with lots of test tubes is not for me ... I'm not a scientist.:science: I work and need practical and fast things on the go
🇵🇹

Serve the shell? No idea what that means, but I feel like this was directed at me lol but I also work and for me the various glass attachments are practical, if not out and about portable, but for home use it is very leisurely and still very fast... Also I guess I see no use for the mod because I already do not need to stir for even extraction and already have very minimal maintenance... for me, it seems to be a negative to have to pay attention to how much I load because it's then going to get packed down, and again I see no value in adding another screen with more metal between the heater and the herb... But clearly some folks are enjoying it, so, as always, to each their own, of course!

When I use that custom prototype stem, the rimmed basket screen is what holds the herbs, so the mod would not work for that, unfortunate since that rimmed screen gets stuck in the TM every time and just makes it a hassle to unload, now THAT is a more impractical testtube stem, though it is very practical loading and in use at least? :lol:

@Vaporific I actually haven't really seen the different tiers for medical and recreational at all in California myself, of course I haven't been to that many places I suppose! But it seems like this isn't so common anymore here? Colorado I know I've seen both though... I really should try to get some nice high CBD herbs or crystals, I just don't really know where to begin, so laziness wins!
 

imor jones

Well-Known Member
Hey peeps, having my TM now for 2 month and loving it. I almost just using the TM over all my Others.
Good machine ;)

I want to relativize my previous post.
I am still also love to use other vapes like the g43, splinter z, vrod, sticky brick, my tubo is in the tuning center in the moment.
But the TM might be the best over all concept...it's the one I recommend now, if people want to buy a vape...
 

dzoinp

Well-Known Member
Accessory Maker
When I use that custom prototype stem, the rimmed basket screen is what holds the herbs, so the mod would not work for that, unfortunate since that rimmed screen gets stuck in the TM every time and just makes it a hassle to unload, now THAT is a more impractical testtube stem, though it is very practical loading and in use at least? :lol:
:cheers:🤜🤛
Yeah! I already used my TM like you describe, dremel is needed
but this way it's almost impossible to stirr, and there will be a lot of green behind ... at least with that amount.
IMG_20200212_000234.jpg

IMG-20200212-005210.jpg

:whip:
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
:cheers:🤜🤛
Yeah! I already used my TM like you describe, dremel is needed
but this way it's almost impossible to stirr, and there will be a lot of green behind ... at least with that amount.
IMG_20200212_000234.jpg

IMG-20200212-005210.jpg

:whip:

Haha yeah I don't have any equipment to do that, would be nice if we could get some of these made with a smaller rim like this!
 

JoeKickass

Well-Known Member
I'm so excited for my TM to be delivered today! I'm going to do a major comparison to my GH, but from everything I've read I think it's going to be my new go-to vape!

... I've gotten nice CBD herb here in Cali and it still did not taste as good as regular herb in my experience...
...I find that a lot of "quality" CBD is pretty blah tasting. There are some exceptions (Tangie CBD from CBD Hemp Direct), but I think the focus in the current stage of CBD breeding is on CBD production and that flavor is, for now, a secondary consideration.
I actually really like Casino Cookies from CBD Hemp Direct, the smell/taste is actually better than a lot of good THC flower!
I love CBD right before bed, for some reason THC keeps me awake but CBD puts me right to sleep.

I actually regularly mix CBD with my THC flower, here is my thinking:
JoeKickass" said:
For thousands of years cannabis was used by humans as a medicine, and a way to bring the body into homeostasis, with few significant side effects recorded. Cannabis averaged ~10% THC, ~5% CBD (roughly a 2:1 ratio)

In an effort to increase the "high", modern cannabis has been cultivated to increase levels of THC, at the expense of CBD. Modern cannabis can be >20% THC and is almost always ~0% CBD

Problem:
Although cannabis has historically been proven safe and helpful, modern THC-dominant cannabis is not as beneficial to overall health and causes sides effects like anxiety, tension, and mild schizophrenia-like effects.

Solution:
Combining modern THC and CBD dominant strains in a 2:1 THC:CBD ratio allows us to experience cannabis as it has been enjoyed throughout history, and how we have evolved to use it. Health benefits are increased, and side effects are reduced.
 

dzoinp

Well-Known Member
Accessory Maker
Haha yeah I don't have any equipment to do that, would be nice if we could get some of these made with a smaller rim like this!
I'm tired of looking and I can't find a 15mm ring ... they are all 16mm.

But wait... @Shit Snacks, this setup has the same metal as my mod screen: :tup::peace:
original heater screen / domed rimmed screen / coling unit screen
And with my mod I pack directly in the steam, I can stir it because the greens are 5mm below the end of the stem, and to dump just blow like the @Siebter :lol:
 
dzoinp,
  • Like
Reactions: karec

bgrpph

Well-Known Member
aloha folks- for those wondering about delivery time , i finally ordered TM on 6/9-,order complete 6/12, shipped 6/25, received in Hawaii 7/1- great shipping time. Immediately put in a charged VTC6, used long stem with CU on lvl 5- 2 hits of Secret Weapon 2- nice & tasty- My 1st stem vape - been using mainly my Ghost MV1 the last few yrs, & on occasion my Mighty & EVO. Thanks to all here for all the great info as i learn the TM tips/tricks.
 

nickb

SSV w/ Standard HC, LSV HC, thermovape all,
I ordered my Tinymight on June 16th, said out of stock up to 4 weeks for delivery, but i recieved it June 29 I wasnt even expeting it, i was stoked, this vape is very good in almost every way, I do feel like the buttom could have been a bit larger the seems like if any it would be the weak point if this vape has any. It hits very well big clouds, I wish a vape like this would come out with a ceramic heater also I feel like a little smaller diameter in the stem would make for milkier hits.and maybe 2 batteries.. otherwise this is a stellar vape. Hits hard. Good size no complaints so far great vape
 

VapeEnthusiast

Troy's Army
Received my tinymight today! Enjoying it so far.

Unfortunately, the button seems to be jammed as though the spring is damaged. Has anybody experienced this? If so, any tips for fixing it?

I've emailed the maker - hopefully he has advice if no one else does.

Thanks!
 
Top Bottom