TinyMight / TM 2

[Facticity]

from the little I've seen as far as video, this thing can deliver huge hits. combine that with the fact that in on-demand it's all convection, it'd be pretty impressive if the ABV wasn't dark and at least somewhat uneven, esp. w/out stirring. I'll be curious to hear reviews that talk about the different temperature settings - it seems like most of the early adopters are opting for big hits/high temps, finishing loads in 2-3 hits. I don't think I've seen anyone reporting back on starting low, working up.

or did I miss something?

I do enjoy vaping at mid-range temps, just for a clearheaded high. So I decided to do some research tonight - here's a comparison of temp stepping the TM vs Omnivap with induction heater: https://i.imgur.com/ReTFzKO.jpg
Left: 0.95g (my average bowl size) in the Tinymite - temp stepping 4-5-6
Right: 0.8g in the Omnivap with induction heater and low temp - 3 heat cycles

Honestly, not a bad roast on the TM, considering the Dynavap benefits from a decent amount of conduction.

 

[Shit Snacks]

Wow i'm so sorry!!

IM sorry, meant to put a and/or too!

 

[biohacker]

IM sorry, meant to put a and/or too!

I read the entire thread, but eventually it all kinda blurs. I'm sure you can see how I overlooked it! All good!

 

[LesPlenty]

Vgoodiez is going to stock them

He said he would like to stock them, he just ordered one to try for himself, like any other vaporist.

Edit, I really should refresh my page before writing up posts.

 

[darbarikanada]

- here's a comparison of temp stepping the TM vs Omnivap with induction heater: https://i.imgur.com/ReTFzKO.jpg
Left: 0.95g (my average bowl size) in the Tinymite - temp stepping 4-5-6
Right: 0.8g in the Omnivap with induction heater and low temp - 3 heat cycles

thanks!

 

[Siebter]

Well from the usage vid the ABV looks way too "roasty" as it was described, and uneven, but that's perhaps because 7 was too hot. But i'm fussy about taste, as if I detect burning starches/sugars/chlorophyll it ruins the experience for me.

I don't quite understand the sugar... a chlorophyllic taste is mostly caused by drying herb too fast after harvesting, both aspects are not something a vaporizer can do much about. I might be misunderstanding something here.

khelek41girls usage video was uploaded mainly because of the high demand of the community for info, it does not aim for studio quality and may suffer a bit esp. when it comes to detailed illustration, so for example the contrasts may be more pronounced than in real life.

Any vaporizer can cook the herb unevenly, it's a matter of heating, pack, amount, grind etc. I got some slight unevenness with my first sessions and even that (to me) was neglectable. Meanwhile I've found my perfect pack and usage for both microdoses and bigger amounts, so those small spots of green don't really occur anymore, even though I don't stir.

I recommend the Tinymight (by the way @all: it's *not* written TinyMight :-) ) especially for people who are fussy about taste. I have yet to experience a hit that I'd consider to be „popcorny“, and I don't think this device is even capable of producing a burnt taste. I'd like to quote Zuhdjs comment on that matter because it's exactly what I experience:

I extracted the whole bowl in just 2 hits. No combustion. I'm on hit 8 of temp stepping my second bowl and wow the vapor is potent. And I barely feel it while pulling. It's almost hard to gauge how large your hit will be.

So true.

Edit: Since a lot of attention has been focused on the hard hitting and fast extraction qualities of the Tinymight, I'd like to point out that it also works well on lower temps, which lets you stretch a session nicely if you prefer that. While the clouds will be smaller, the vapor quality remains to be the same. I just did a .075g session on temp setting 5.5 (instead of my usual 7-7.5) and got 5-6 small, but lovely tasting clouds. ABV turned out to be 100% even (medium to coarse grind here). Effects just hit me oh so nicely. And how the fuck is this device able to stretch the flavor of herb so well without even a hint of toasted darkness? I don't know.

 

[Zuhdj]

I agree. Though its a haaard hitting fast extracting vape. It can do some nice temp step sessions

 

[Baron23]

Thanks. Does she have her own site though? I didn’t see that on Page 12. No, I haven’t seen a video of this, only pics on https://tinymightvape.com/ and here. Is this site hers or the direct manufacturer’s? This could be a perfectly wonderful and awesome vape for me.

https://www.kgwoodcrafts.com/

I'm pretty sure its in the thread somewhere but would be nice if she added it to her profile page or something, yeah?

Also, wrt to constant product improvement...that is, that the device is still being improved.....that approach seems to be applauded when it comes to New Vape who also do not version control in particular and will cut in changes as needed. As do many other vape companies.

Not sure why this would be controversial with this vape?

 

[Brewervapesalot]

Just read this thread. I still cant figure out what anyone is legitimately complaining about....

Looks like a solidly constructed portable vape that, from the video, cranks clouds quickly. The screw open battery compartment looks super durable and the analog dial control I personally applaud.

It's not an all glass path, but so what. Many vapes are not. The stainless cooling assembly seems unique in design, and looks fine to me.

Basically, I'd love to try this vape.

Edit: this thing pushed enough of the right buttons for me that I am order #61. Lol. Pretty impulsive, but we'll see!

Edit #2: https://m.imgur.com/q3qi3gU

Looks great, nuts and bolts and all !

 

[Vaporific]

There’s no magnetic cap, correct? I didn’t see on on the retail site. The video, specs and postd herein early on really have me intrigued about this vape. While this likely won’t be available for Black Friday sales, I’m buying a new vape by then and this has made my short list and checks off many boxes...

 

[TommyDee]

<snip>
...And how the fuck is this device able to stretch the flavor of herb so well without even a hint of toasted darkness? I don't know.

If the heater never gets hotter than the setting, combustion should not happened. TM has achieved thermal stability at the herb.

 

[Facticity]

If you aren't getting evenly roasted herb, try placing the cup screen in front of the cooling unit (closer to the heater within the tube). I think having the stainless steel mesh against the back of the herb makes it heat more evenly by keeping it off the cooling unit. This has given me the best results so far.

Edit: With this same logic, using the Mistvape dosing capsules will likely increase efficiency and evenness of roast. In @khelek41girl 's video, using the capsule seemed to create a nice, even AVB. Will try and report back.

Overall, this thing is great. Lasts around 10 chambers for me with varying length of sessions.

 

[Zuhdj]

I've used mine exclusively since i got it. I wanted to see if i would miss anything from the crafty or dyna or grasshopper or sbj. The crafty is definatly my preference for long 20ish min sessions and i like the dyna because it's fun. But also i prefer it for microdosing. But the tinymight completely replaced the function of my grasshopper. It just does the grasshoppers job better and more pleasantly. And I'm going back and forth between this and the sbj for the "getting ripped" vape. {5}

Tldr: This vape can do the function of all of my other vapes. But imo it can only really take the place of my sbj and grasshopper. I have a ghost coming in next week so I'll be comparing it to that too.

 

[invertedisdead]

The crafty is definatly my preference for long 20ish min sessions

Why?

 

[Zuhdj]

Why?

It's easier to get more hits out of because the vapor isn't as thick.

 

[Brewervapesalot]

I've used mine exclusively since i got it. I wanted to see if i would miss anything from the crafty or dyna or grasshopper or sbj. The crafty is definatly my preference for long 20ish min sessions and i like the dyna because it's fun. But also i prefer it for microdosing. But the tinymight completely replaced the function of my grasshopper. It just does the grasshoppers job better and more pleasantly. And I'm going back and forth between this and the sbj for the "getting ripped" vape. {5}

Tldr: This vape can do the function of all of my other vapes. But imo it can only really take the place of my sbj and grasshopper. I have a ghost coming in next week so I'll be comparing it to that too.

I haven't used thing yet, but I'm familiar with the design and using vapes like it. I also have owned the MV1. My bet is that the simplicity of this thing will win out over the MV1.

I really want see your comparison of the vapor temperature, quality, and cloud size.

 

[dzoinp]

me dê papai...

 

[Brewervapesalot]

Any one know of a US link for Mist Vape capsules? Figure try a few of those when I get this thing...

 

[muunch]

Any one know of a US link for Mist Vape capsules? Figure try a few of those when I get this thing...

Perhaps the MistVape website?

http://mistvaporizer.com/shop/index.php?main_page=product_info&cPath=3&products_id=102

 

[Brewervapesalot]

Perhaps the MistVape website?

http://mistvaporizer.com/shop/index.php?main_page=product_info&cPath=3&products_id=102

Thanks!

Edit: what's a good website for glass stems that work with this vaporizer and that I can attach to a 14 and/or 18 mm gong joint?

 

[Zuhdj]

Thanks!

Edit: what's a good website for glass stems that work with this vaporizer and that I can attach to a 14 and/or 18 mm gong joint?

Idk about different glass stems. I'm probably going to get this for mine

https://www.sneakypetestore.com/col...cts/the-master-adapter?variant=23564648153169

 

[Brewervapesalot]

Idk about different glass stems. I'm probably going to get this for mine

https://www.sneakypetestore.com/col...cts/the-master-adapter?variant=23564648153169

Someone said Milaana glass pieces fit? On milaana website, it has mouthpieces with 19mm gong joint, looks like anyway. Will the milaana 19mm gong mouthpiece work with 18 mm gong joints?

18, 18.8, 19 mm gong joints etc., are all pretty intenchangable?

Edit: https://www.rastabuddhatao.com/product-p/smpsm.htm

Fit this vape? Fit a 18 mil gong joint? Didnt I see a post like this already?

 

[Shit Snacks]

Someone said Milaana glass pieces fit? On milaana website, it has mouthpieces with 19mm gong joint, looks like anyway. Will the milaana 19mm gong mouthpiece work with 18 mm gong joints?

18, 18.8, 19 mm gong joints etc., are all pretty intenchangable?

Edit: https://www.rastabuddhatao.com/product-p/smpsm.htm

Fit this vape? Fit a 18 mil gong joint? Didnt I see a post like this already?

Yes 18=18.8=19mm, the variance is joint length

 

[Nano-Doser]

Can any of the guys that have already picked one of these up comment about the vapour warmth and harshness in relation to other vapes? For example how does the vapour compare to a solo 2 with standard stem and the mighty? I've read that the vapour is surprisingly cool and not harsh, but without context that could mean anything. I'm really keen to pick one up but really don't want to be irritating my mouth with uncomfortable vapour. I'm sure the vapour can't be as fluffy and cool as the mighty (unless that little cooling unit works like magic) also, has anyone cleaned the cooling unit yet? I'm wondering how much of a bitch that is going to be? Can it just be dunked in iso? Or is it a requirement to disassemble the unit and clean it? Any info would be awesome! Cheers

 

[mephisto]

Using the short stem and 6.5 setting I feel zero heat at all. That can be misleading as it tends to lead to
over hitting......The coughing fit that I caught yesterday on some super dry Hemp was unexpected. I totally blame it on the cooling unit and effective delivery of the TM. I have not cleaned the cooling unit, and I probably will not until condensed resin gets delivered to my face, or I cannot draw through the device.