Alligator427
Well-Known Member
Very high, but combuste two time.
Not really closed to the spot. Need more investigations
Thermal Accumulator by phattpiggie
- Thread starter Custom Flower Hardware
- Start date
Not really closed to the spot. Need more investigations
coolbreeze
Well-Known Member
My TA1 got cleaned three times the first day! (and none since!)Very high, but combuste two time.
Hah! Now that you mention it, I'm sure my technique could use a little work. ; )Not really closed to the spot. Need more investigations
Smknbud
Well-Known Member
Mine arrived today.....really are nice stems. With the TA oversize o-rings the fit is perfect.....stock o-rings and the TA3 had some wiggle to it.
That's beautiful bro!Mine arrived today.....really are nice stems. With the TA oversize o-rings the fit is perfect.....stock o-rings and the TA3 had some wiggle to it.
Alligator427
Well-Known Member
Ok, I finally search here a little bite how the people use their wand and found the good way. 15s manually at 325°C and after in auto : I have a huge flavor hit. Never heat twice or I need to find a lighter temperature/time for the second heat.
Tempest head is nice, but I felt that need more heat retention and a bowl little bite bigger to use with water. With the TA3, I have just what I need.
Tempest head is nice, but I felt that need more heat retention and a bowl little bite bigger to use with water. With the TA3, I have just what I need.
Last edited:
So got the TA3 and dug out the old wand from a box in my garage. After reading the mixed reviews I was entirely surprised. Fucking thing blew my head off. One cycle at max temp and the bowl was absolutely totally roasted. Not worth saving the AVB.
And it gets consistent heating every single time. One cycle extracts the hell out of any bowl. This thing works like a charm.
I tried some hash, and it was great, but the heat retention wasn't as good as I hoped. Anyone swapped the balls for rubies of something similar?
Also any tips for some simple and not wet too expensive wooden stems in Europe? Im not big on luxury items, but simple and functional designs.
Hat off to @phattpiggie, this is the shit!
And it gets consistent heating every single time. One cycle extracts the hell out of any bowl. This thing works like a charm.
I tried some hash, and it was great, but the heat retention wasn't as good as I hoped. Anyone swapped the balls for rubies of something similar?
Also any tips for some simple and not wet too expensive wooden stems in Europe? Im not big on luxury items, but simple and functional designs.
Hat off to @phattpiggie, this is the shit!
coolbreeze
Well-Known Member
This should work, if you're interested I can try it later.
https://recommendedvapesupplies.co.uk/products/dynavap-dna-stem-vaphit
They make others with dimpled stems, too which will work well, with the caveat that the glass will get hot and the thicker the better. A maria near the heater will stop the heat from spreading and give you something to hold, if you can find something like that.
SlickHenry
Well-Known Member
I recommended this stem a few posts back. It is very good and I confirm it doesn't get hot at all with the TA3. Obviously it is glass so requires a bit of care but overall I am very happy. If you want a wooden stem then there are cheaper options out there but you will probably want a mouthpiece/condenser which adds to the cost.
Sorry if it didn’t come out clear, but it’s a wooden stem I’m after, I got plenty of glass! Had a revolve gen1 with wooden sleeve but it didn’t work out. Phatpggie has some stems on vapegoodiez, but shipping and tax and all they are way above my budget atm.
I guess I could use my old dv omni condenser/mp if I had a stem that was thick enough to handle the heat.
Thanks anyways.
I guess I could use my old dv omni condenser/mp if I had a stem that was thick enough to handle the heat.
Thanks anyways.
Franco
is (most likely) vaping
An Ed's tnt stem should work. LCV has them in stock.
coolbreeze
Well-Known Member
Sorry, you were clear, I just got distracted looking for something I couldn't find, found the glass ones instead, and...wait, what was the question? ; )
But I did find you something both artisan and reasonable, and glass lined (it's removable). I have the blackwood one of these and it's superb. I don't see mention but mine has a short SS liner near the end for the tip:
Embout bois exotique et verre en interne pour DynaVap Aezhenn
Tuyau en bois exotique avec le tube en verre interne Wood'N Glass Line de l'artisan français Aezhenn, corps en bois pour vaporisateur DynaVap
www.vaporisateur.net
ibnganja
Well-Known Member
Hi Guys,
Been a while, I been away. And been smoking, forgive me for I have sinned.
im getting back into vaping and I love my trusty TA.
I have the same one as in THIS PICTURE
It seems to be clogged. I can't inhale or exhale through it. I tried cleaning with 99% alcohol but something seems stuck. Maybe hardened oil over the past year? any ideas how to clean it?
I also had another question:
I may be wrong -- but I remember at one point PP mentioned that those who bought the original TA will get a discount for the new v ersion? or replaced with the new v ersion? I bought my TA when they first came out, been a while, can't remember how long. Are there any new versions?
Been a while, I been away. And been smoking, forgive me for I have sinned.
im getting back into vaping and I love my trusty TA.
I have the same one as in THIS PICTURE
It seems to be clogged. I can't inhale or exhale through it. I tried cleaning with 99% alcohol but something seems stuck. Maybe hardened oil over the past year? any ideas how to clean it?
I also had another question:
I may be wrong -- but I remember at one point PP mentioned that those who bought the original TA will get a discount for the new v ersion? or replaced with the new v ersion? I bought my TA when they first came out, been a while, can't remember how long. Are there any new versions?
Orvaxxx
Well-Known Member
Stem in France and KaluVap are French woodworkers who you can contact on Facebook or Instagram.
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
thread got busy after the announcement, but yes hopefully you are not too late for the upgrade program wherever you bought it! Reach out to get one of the new models which were detailed here earlier as well
Thanks. But holy fuck thats a horrible website!Sorry, you were clear, I just got distracted looking for something I couldn't find, found the glass ones instead, and...wait, what was the question? ; )
But I did find you something both artisan and reasonable, and glass lined (it's removable). I have the blackwood one of these and it's superb. I don't see mention but mine has a short SS liner near the end for the tip:
Embout bois exotique et verre en interne pour DynaVap Aezhenn
Tuyau en bois exotique avec le tube en verre interne Wood'N Glass Line de l'artisan français Aezhenn, corps en bois pour vaporisateur DynaVap
Smknbud
Well-Known Member
Came in yesterday and I'm loving it so far! Stays incredibly cool even after back to back bowls! I actually prefer the stem over the WPA I was using. I get more potent hits or maybe I'm just imagining it lol. Really loving my TA3!
That's really nice looking. Enjoy!
The XL stems do a great job with cooling. I added the DV xl condenser (nice that his mouthpiece is custom made to fit it) to mine along with a TRWW intercooler.
After about 8 or 10 bowls, yeah no heat issues! Besides a couple of double deckers on the stunner, My testing tonight was exclusive to the TA3. Maybe the stem got warm? I am high as fuck right now!
Came in yesterday and I'm loving it so far! Stays incredibly cool even after back to back bowls! I actually prefer the stem over the WPA I was using. I get more potent hits or maybe I'm just imagining it lol. Really loving my TA3!
VapingYogi
Pranayama; of a sort.
I am surprised that after >100 bowls total I have yet to combust once in the TA3... I expected it to be a messy smokey learning curve but nope...
@Kalu & @Aezhenn (France) are making awesome custom stems.
I've been using my TA3 since weeks now and I have to say I'm charmed by its simplicity and efficiency. The device handles heat well, and can be pushed to its limits without combustion (compared to the more sensitive Tempest, for example).
I've also tried it with ruby beads of the same diameter, and it seems to take a little longer to heat up, but keeps the heat longer, I think.
With its mini-sleeve, I can easily handle it and store it when it's hot.
Thanks @phattpiggie for your generosity!
Last edited:
VapingYogi
Pranayama; of a sort.
thank you for stem makers, I really want stem specifically for my TA@Kalu & @Aezhenn (France) are making awesome custom stems.
I've been using my TA3 since weeks now and I have to say I'm charmed by its simplicity and efficiency. The device handles heat well, and can be pushed to its limits without combustion (compared to the more sensitive Tempest, for example).
I've also tried it with ruby beads of the same diameter, and it seems to take a little longer to heat up, but keeps the heat longer, I think.
With its mini-sleeve, I can easily handle it and store it when it's hot.
Thanks @phattpiggie for your generosity!
I love my Revolve Gen 2 but I want something made specifically for the TA
where did you get your stem (sorry if I missed it)
Came in yesterday and I'm loving it so far! Stays incredibly cool even after back to back bowls! I actually prefer the stem over the WPA I was using. I get more potent hits or maybe I'm just imagining it lol. Really loving my TA3!
Last edited:
Electrofever
Well-Known Member
fangorn
Well-Known Member
I quite like using it too!
the fact of only having glass stems to try with the TA is undoubtedly a blessing for me...
with the glass, the flavors are really good.
(too bad I didn’t try the Tempest with a glass stem!!)
I burned once... one of the rare times I wanted to do a second heat...
Currently, my avb is clearer than during my first tests... technique to improve!
and so it will essentially be used instead/alternating with the Terpedo...
(the only problem with this one is the chamber is too large, and the fact that I have to manage a hemp fiber filter to resolve that... it adds an additional step and accessories which risks influencing the test of scope).
so there you have it, when the TA was in transit, I remember thinking that I could have refrained from buying it, that I already had vapes that would give me the same result, and that I had made a bullshit...
but today, I don't regret having made this purchase at all!!!
I don't have the budget this month, but it will be a pleasure to do some research to find a stem for it!
the fact of only having glass stems to try with the TA is undoubtedly a blessing for me...
with the glass, the flavors are really good.
(too bad I didn’t try the Tempest with a glass stem!!)
I burned once... one of the rare times I wanted to do a second heat...
Currently, my avb is clearer than during my first tests... technique to improve!
and so it will essentially be used instead/alternating with the Terpedo...
(the only problem with this one is the chamber is too large, and the fact that I have to manage a hemp fiber filter to resolve that... it adds an additional step and accessories which risks influencing the test of scope).
so there you have it, when the TA was in transit, I remember thinking that I could have refrained from buying it, that I already had vapes that would give me the same result, and that I had made a bullshit...
but today, I don't regret having made this purchase at all!!!
I don't have the budget this month, but it will be a pleasure to do some research to find a stem for it!
