It's wild how long it can go with small sips, had it 6 days and still amazed every time how many puffs I can get.
Anyone any tips for using ruby balls please, wand temp higher or lower than the standard zirc?
-
SCAM WARNING! See how this scam works in Classifieds.
The Tempest by Mad Heaters & Phatpiggie
- Thread starter oddjobold
- Start date
Anyone any tips for using ruby balls please, wand temp higher or lower than the standard zirc?
The heat cycle length is great. The weed taps out before the vape does. I think Tempest 2 with hash or concentrates gives an amazing joint experience. It's my favourite hash vape for sure because of that.
jungpunk420
Well-Known Member
Damn son! I thought for sure you combusted!A full bowl one heat extraction video. I did it with cbd since I had to work on some things, so you can expect better results with thcalso, the abv image looks more dark than what it is.
Edit: most of the puffs are mtl
General Disaster
Stationary momentum!
It won't provide the effect of the carbon monoxide created by combustion so the effects will never be quite the same, but that said, it was when I got my first tempest last year that I started to really find an acceptable substitute which if not the same, came with it's own bonuses (beyond the health side).
HoodiesAndHondas
Active Member
Th V2 manual isn’t done yet (and they don’t ship with the devices anyway). It’s all online.
A few V2-specific things at the top of the page here: https://madheaters.co.uk/pages/tempest-2-manual
cybrguy
Putin is a War Criminal
Ten years post cannabis combustion (and about 25 years past cigarette self destruction) I no longer lust for that carbon monoxide induced oxygen deprivation that comes with combustion. Once I started vaping, I really never looked back and I barely enjoy a hit off a joint these days when I am offered.
Last edited:
kokolokokolokon
Well-Known Member
@sentabi i would recommend a double-triple-quad flame for the v2. I remember brenyo recommended a concrete one from amazon. I would recommend the one i have (triple flame with good tank and stone instead of click) but damn, i bought it from aliexpress and now i dont find it 
if i find it I will share it here.
Anyway you still can use a single flame, with power (but not a giant flame). A flame which can “cover” the heating zone
if i find it I will share it here.Anyway you still can use a single flame, with power (but not a giant flame). A flame which can “cover” the heating zone
Wozz
Well-Known Member
Sorry for the confusion
The V2 manual isn't ready yet.
Well, I've not seen it I should say.
I was trying to say that I knew if I waited to read the manual there'd be a way to easily locate each bowl setting. That I was sure Brenyo would have thought about this , and addressed it. He has
Brenyo's explanation for how to use the tool will be included in the manual id imagine.
His advice was easy to follow.
The tool made it quick n easy n to set small and mid bowl size.
The "Cadrim" is my goto torch.
ThisIsMyVapestick
Member
Ah, glad to hear it. My guess for your flavor problem was a dirty glass wand bowl. Was it just an iso soak, with the balls removed, that fixed the flavor? My primary T1 head is at the point that it needs a good polishing to clean up as it has some chaz on it and iso soaks are doing nothing for the color. I just need to completely disassemble the head, deep clean it, polish it, and while I've got it all apart, I need to again try to figure out what's wrong with the click disks (only one click). Considering a similar process helped out your situation, I'm now wondering if my flavor can be improved by doing that. Guess there's one way to find out.
General Disaster
Stationary momentum!
Oh? So you won't be interested in helping me develop a new type of vape with a built in supply of monoxide and a little value to adjust how much you get!
cybrguy
Putin is a War Criminal
No offense meant but the sad truth is people will do whatever it takes to get high. When I was a kid, a lot of the people around me were doing things like huffing deodorant and glue. I even sniffed glue myself a few times. Talk about giving up brain cells for a buzz...
My point is, while you may not be able to make a living from it, I'm sure you could find some takers for your monoxide generator.
Sorry folks, way off topic...
This will bring it back. Does the thicker induction sleeve make the spinning of the device when using a torch less necessary?
My point is, while you may not be able to make a living from it, I'm sure you could find some takers for your monoxide generator.
Sorry folks, way off topic...
This will bring it back. Does the thicker induction sleeve make the spinning of the device when using a torch less necessary?
Last edited:
General Disaster
Stationary momentum!
It was only a joke, I didn't think anyone would actually take it seriously in this thread.
Alcohol?
kokolokokolokon
Well-Known Member
It is necessary but less. In the video i posted you can see i dont spin it continuously. And it makes it much more comfortable and easier to take a look at the VI
Minsc_NBoo
Well-Known Member
So it's technically a week since I got my T2 last Saturday (it's nearly 1am right now... It counts)
I can't wait to see more people get their deliveries! I won't gush too much now, but I am blown away by the vapour production I am getting. It's so easy with the wand too.
I'm using the timeout method. 280c to 290c for using natively (540f/555f) and 300c-310c on a bong (570f/590f). The majority of the time this will fully extract in 1 cycle
I gave it a very quick clean earlier. Its easy to take apart and put back together. There is only 1 oring on the stem, and 2 on the bowl that need a little lube
I just used kitchen roll (paper towels?) to give it a wipe down in the bowl and mouthpiece, wiped the CU and gently twisted the paper directly down the stem. It still needs a proper ISO soak to get it sparkling, but it's good enough for a few more days usage
Finally, a word of warning. The big bowl I had 2 hours ago hit me like a sledge hammer. I'm going to try the 0.15 setting for a bit
I can't wait to see more people get their deliveries! I won't gush too much now, but I am blown away by the vapour production I am getting. It's so easy with the wand too.
I'm using the timeout method. 280c to 290c for using natively (540f/555f) and 300c-310c on a bong (570f/590f). The majority of the time this will fully extract in 1 cycle
I gave it a very quick clean earlier. Its easy to take apart and put back together. There is only 1 oring on the stem, and 2 on the bowl that need a little lube
I just used kitchen roll (paper towels?) to give it a wipe down in the bowl and mouthpiece, wiped the CU and gently twisted the paper directly down the stem. It still needs a proper ISO soak to get it sparkling, but it's good enough for a few more days usage
Finally, a word of warning. The big bowl I had 2 hours ago hit me like a sledge hammer. I'm going to try the 0.15 setting for a bit
TheDandelion
New Member
Hi everyone!
I'm new to the world of vaping and am very excited to purchase a Tempest 2 upon release having sadly missed the pre-order.
I wanted to ask, will the final release 'silver' version look similarly to the titanium version? I'm not really into the coloured versions of the T1 and would love to get my hands on a clean metal look T2 if possible.
Do we have an idea of what the silver version looks like? Thanks so much.
I'm new to the world of vaping and am very excited to purchase a Tempest 2 upon release having sadly missed the pre-order.
I wanted to ask, will the final release 'silver' version look similarly to the titanium version? I'm not really into the coloured versions of the T1 and would love to get my hands on a clean metal look T2 if possible.
Do we have an idea of what the silver version looks like? Thanks so much.
Last edited:
.d
Wubba Lubba dub-dub
It should look almost the same, no noticable difference except the weight I believe. Maybe a bit different shade of it
TheDandelion
New Member
HaggisHunter
Well-Known Member
6 nights in and 6 fulls nights sleep I've had in a row. That's no happened since I started having issues with a trapped last January.
I'm using less meds, I'm getting more mileage out my meds and I'm getting better effects, last administration of meds is about 9:30, I'm falling asleep by 10 and I'm getting a full nights sleep without waking up. This just hasn't been happening, a lot of times the pain is so bad I end up getting up to stop me disturbing my wife, so she's also getting a better night's sleep too.
There's an extra level of extraction in the 2 and it's absolutely making a difference when it comes to my pain management.
I'm going to share some of my thoughts on it at some point, but at the moment there's only one thing I really don't like, the green indicator....
For whatever reason, if I'm at home, under our normal lights, I just can't see it, that and it's absolutely pulling the the strings of my OCD
Before I was using a Dynavap, she noticed the difference more when I started using the original tempest.
Looking forward to seeing it though.
I'm using less meds, I'm getting more mileage out my meds and I'm getting better effects, last administration of meds is about 9:30, I'm falling asleep by 10 and I'm getting a full nights sleep without waking up. This just hasn't been happening, a lot of times the pain is so bad I end up getting up to stop me disturbing my wife, so she's also getting a better night's sleep too.
There's an extra level of extraction in the 2 and it's absolutely making a difference when it comes to my pain management.
I'm going to share some of my thoughts on it at some point, but at the moment there's only one thing I really don't like, the green indicator....
For whatever reason, if I'm at home, under our normal lights, I just can't see it, that and it's absolutely pulling the the strings of my OCD
I haven't noticed, but my Mrs thinks it might be a tiny bit more noticeable than previous.
Before I was using a Dynavap, she noticed the difference more when I started using the original tempest.
As @.d said, difference might be marginal, depends on what type of aluminium and what the finish is like, I've seen some very similar finishes between the two materials in my own line of work.
Looking forward to seeing it though.
Dirigible_Molecule
Retired rebel.
Same for me. I haven't turned on my WOHW ball vape since Ti arrived. As I hoped, the bowl is big enough and the extraction is complete to get me to sleep. Medical user for pain and insomnia.
I have an olympic level tolerance after many decades so I need a number (ahem) of full bowls just before bed. I now use a resin full spectrum Co2 extract indica cart at night ( only for that purpose as I dont like them), but I haven't woken up and had to use it recently!
Enjoy sleep and improved family life 8)
TheDandelion
New Member
Wow that's great to hear - I've been considering all day whether to buy the WOHW or just wait for the Tempest 2. Looks like I should just be patient and get the Tempest before considering a desktop ball vape.
I only started vaping this month trying the Mighty+ and Dynavap so far. I much prefer the butane powered device intake method as a ritual.
Fearless Disaster
Well-Known Member
I believe the regular heat shields will be aluminum. A raw polished aluminum can look pretty shiny but also different than raw polished steel or titanium when put right next to each other. I think the more highly polished, the more all the materials look silver and similar but I don't have much experience with raw polished aluminum. If its anodized like the other colors it might take a slightly matte finish. here is a picture of a clear anodized aluminum flashlight I have:
I believe this was polished before anodizing, although I don't know how highly polished and shiny it was.
Last edited:
It’s noticeably different; the aluminum is much brighter silver. It will match the brushed aluminum Reload, all colors will be matching with the Reloads.
Might be a silly question but how much of the tempest 2 is titanium, isit the whole thing or just the heat shield? Loving it by the way. Didn't think there would be too much difference in performance but the V2 manages to be smoother and produce massive hits. Shines when you run it through water, looks like smoke at times
HaggisHunter
Well-Known Member
Definitely worth a go first. This thing rips, and with a smaller footprint than a desktop it might well be more convenient for you, I'd definitely recommend the wand to go with it
All titanium other than the aluminium heat shield on the release model.
T2 US shipping update
I currently have a few parcels en route to the US with different couriers to test what happens. I’m still waiting for them to arrive, so the newsletter announcement will be delayed by a couple of days to allow me to assess the situation more thoroughly. It's very likely that there is a working solution that I can't announce
I will do EVERYTHING I can to ship the parcels with zero or minimal tariffs as soon as possible. The longer the wait, the more free goodies you can expect with your order.
The second batch of full titanium stock is expected to arrive around May 16. Once it does, I’ll begin packing all US orders so they can ship as soon as a solution is in place or there is a change with the tariffs.
By default, all US orders are on hold, so you don’t need to contact me unless you wish to cancel your order. To cancel, please use the contact form and select "Cancel Order." Note that refunded full titanium Tempests cannot be reserved until the situation is resolved and repurchased.
I currently have a few parcels en route to the US with different couriers to test what happens. I’m still waiting for them to arrive, so the newsletter announcement will be delayed by a couple of days to allow me to assess the situation more thoroughly. It's very likely that there is a working solution that I can't announce
I will do EVERYTHING I can to ship the parcels with zero or minimal tariffs as soon as possible. The longer the wait, the more free goodies you can expect with your order.
The second batch of full titanium stock is expected to arrive around May 16. Once it does, I’ll begin packing all US orders so they can ship as soon as a solution is in place or there is a change with the tariffs.
By default, all US orders are on hold, so you don’t need to contact me unless you wish to cancel your order. To cancel, please use the contact form and select "Cancel Order." Note that refunded full titanium Tempests cannot be reserved until the situation is resolved and repurchased.
Last edited: