so the downstem is removeable? it looks like it haha. I want a globe type bong where i can add a whip(remove the mouthpiece) but also remove the downstem so when I do clean the downstem doesn't break from the iso sloshing around
-
SCAM WARNING! See how this scam works in Classifieds.
The Tempest by Mad Heaters & Phatpiggie
- Thread starter oddjobold
- Start date
zeebudz
Well-Known Member
Never heard of a downstem breaking from swishing around ISO...
cybrguy
Putin is a War Criminal
Downstem and mouthpiece both come off. Much easier for cleaning. I have a couple of other mouthpieces I occasionally throw on there. Being tall and relatively narrow, it is not the best piece for throwing a whip on. This is my favorite for that. Very heavy.
The cheap glass thread is a better one for this conversation...
Last edited:
kokolokokolokon
Well-Known Member
Only hash. No cotton, no fiber. Half bowl full of hash. A kind of hash a little sandy but flavorful, “thin”. With other kind of hash this would be a mess
It gave me more hits but, after the third hit i started to cough hard
leanpubpackage
Well-Known Member
Just torched the zirconium balls in a spoon for the first time. Very satisfying to see them go from brown to white. These days, it's the little things...
Does not look like stoner activity if you ask me lol
After experimentation, 2.5mm zro2 remains my favorite balls for the tempest…and zro2 overall for my ball vapes.
Good power and flavor without the harshness I seem to get with rubies and boro
i still have yet to do this and have owned mine for some time now. what is the most basic torch that will do the job? i only plan to use the wandJust torched the zirconium balls in a spoon for the first time. Very satisfying to see them go from brown to white. These days, it's the little things...
kegstandman420
Well-Known Member
I just took my stock zrc balls out to clean and put 3mm boro in. I turned the wand down from 600 to like 580 and combust 1st pull. Don't think I've combust once with the stock balls even at 600. I'm pretty sure my zrc are 3mm not 2.5, there seemed to be roughly 45. The boro Def made me cough more, but i went to the quad flame after the combustion incident. What's the final drop going to come with 3mm or 2.5mm zrc?
kokolokokolokon
Well-Known Member
Love that cleaning box. Less ISO needed in the cleaning.
I would go for 2,5mm zirc/glass as basic balls and maybe give the chance to choose between some options
Suki
Well-Known Member
any ETA on this?
kegstandman420
Well-Known Member
So the head, along with vi and click disks can be iso soaked without damage? That box is an awesome idea!
love the idea! sorry to bring a negative question but since its 3d printed the iso doesn't deteriorate the case? I'm very unfamiliar with all the 3d printing materials so to see one with hold iso sounds impressive!!
Probably by the end of the month.
yes
Only after a very long time, for example if you leave iso in it for over a year. It should be washed after you empty out the iso and rinse the parts within the box.
666Honeybadger
Unknown member
Cool!
I wonder if that store will also have a EU bankaccount for payments?
My bank charges me for "international/non-EU" transactions
hence my question...
Yes it will have an EU EUR account and EUR card payment.
Last edited:
666Honeybadger
Unknown member
My man!!!
So no "handling fee" for border patrol and no mandatory donation to my bank!
This means i can get some extra goodies with my upcoming order instead!
Maybe another Reload (i have plenty really but they are so hard to resist) or possibly another sleeve? How about an extra tip?
Ooooh, too many options!
Thanks Brenyo, great solution for EU customers!
kegstandman420
Well-Known Member
So I've been messing with the 3mm boro, and for me I had to turn the wand almost back to 550. Still tasted burnt on the first pull. Definitely like the zrc more ATM. Boro may be better for half bowl 1 and done with a quicker heat up time just IMO.
Smknbud
Well-Known Member
Curious why you went PETG vs PLA? Any plans to make STL available on Makerworld like you so kindly did for the Wand stand?
VapingYogi
Pranayama; of a sort.
man... now I need this too
lower the temp, you need to drop the temp in the wand by 50-75f, the boro heats up more in the same time
I have both a Revolve Gen 2 - which I am using with a Thermal Accumulator - and I have the Tempest. The Revolve Gen 2 is handling the TA3 totally fine (with a Tempest wooden sleeve) but the reclaim screen seems to restrict the airflow noticeably - which is good for the TA as I MTL but its the only thing that I notice that's different in my general use of both of them side by side
This reminds me, the spherical Rubies, when I was playing with spherical Rubies in the Tempest I found that it took longer to heat up and cool down but without increasing the amount of vapour in any meaningful way. I didn't like the extra power that was required to get the spherical Rubies to a adequate temp - its great in devices with a coil as it seems to handle the temp really well in that situation, but I don't like them in my wireless or manual vapes.
Last edited:
Do you mean revolve with a Dynavap tip? No offense but comparing Dynavap to Tempest is like comparing a bicycle to a rocket ship. Doesn't make sense to even compare.
I'm sure there will be plenty people putting a Tempest tip on a Revolve stem though.
Smknbud
Well-Known Member
First, thank you yet again for sharing an stl file you created.
I have Bambu Lab petg filament and since that's what you used I shall also. And I also have that extra o-ring you included with my Reload.....so pretty much set.
I'm a happy camper.