Discontinued The Persei Vaporizer for herbs and concentrates.

arrr

Well-Known Member
Anyone use the AC on a 510 mech mod?

Would love to know if all atomizers work in 3.7v mode with an 18350 AW irm battery.
 
arrr,

torggzorz

All your Vape are belong to us
Just tested mine on my king V2 mech, seems to work just fine with a 510-601 adapter

EDIT: All three coils do function (single coil the best I think) but you will probably get better performance if you can upgrade to an 18650
 
Last edited:
torggzorz,
  • Like
Reactions: arrr

BK89

Well-Known Member
My AC dual coil is working great with the V2 chrome top I just bought .

Yep, me too. I got the chrome v2 and the AC works great on it. But I think there may be something wrong with my v4 top. I still cannot get it to work in 7.4v mode with the AC (both the single and dual coil). Tried with two pair of freshly charged AW IMR batteries (and one pair is brand new). I keep getting the three blinking red lights. Same batteries work great with the chrome v2 top.
 
BK89,
  • Like
Reactions: DieHard
I'm using my chrome v2 top for my experiments as well, if that makes a difference.

The alpha C paring with the okeanos and using that setup on the 8 is like




the load as you go experience i've been hoping for for the last 3+ years
I can't help but notice you've been waiting for a craaazy expensive LayG setup.

Heat wands are not my thing. Seemed to slow when i can pull out a big and pull monster rips.

Edit: just loaded my fresh 18650 with the single coil, held for 7 seconds and barely got any vapor. Covered the coil so i couldn't even see it, still no vapor. Kinda frustrating that my gear is not compatible. Was looking forward to using it all weekend at a tournament, but I can't trust it enough. Guess it sits next to the herc, while I use my $15 globes until I get new tops. But my Perseis are so old, they are out of warranty.
It's definitely not the best case scenario, but at least for the price of the AC, you could get one of those older tops upgraded and rock out with a killrar Persei/AC combo by next week.

So tempted buy a couple of the chrome v2 but man I dislike chrome idk why
You dislike it so much that $20 seems unreasonable? I hate anodized colors, but if they were offering the color v3's on the website for $20, Id grab a possibly unreliable top and a hideous color monstrosity. I mean... $20 is pretty cheap... So cheap it mashes all the impulse buy buttons in my brain.

Edit: Bender's supposed to be coming to my house today; can't wait for him to get here!
 
Last edited:

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
Kiss Alpha Centauris are sold out. All orders placed today by 5pm will be going out after that its sold out with maybe 1 or 2 left.
 
THC SCIENTIFIC,
  • Like
Reactions: TommydCat

lonelyhero

the lost soul
Company Rep
No I don't dislike chrome enough not to buy I just picked up a chrome hammer top and I'm sure I'll be adding at least 2 of the chrome v2's in the near future as backups
 

tharealmclovin

Well-Known Member
Got home to double check my single coil. Reads 9.9 ohms on the iris. So it's a bad coil.

According to Sam I am the lucky winner of the first DOA Cart. Yay for me. :(
 
tharealmclovin,
No I don't dislike chrome enough not to buy I just picked up a chrome hammer top and I'm sure I'll be adding at least 2 of the chrome v2's in the near future as backups
I was pretty excited to finally have a body for my hammer top, since chrome models are out of production. I'm impressed by the solid feeling of the v2 in chrome. Feels like it could double as a weapon, lol. The button on my v2 top is ridiculously recessed, but if I use my index finger instead of thumb, I have a grand old time. I understand not loving chrome, since shiny is the exact opposite of low pro, but at $20 it's tough to complain.

On that note, my v2 has a weird seam on the inside of the tube that appears to be a crack, but the body has no indication of crack or imminent failure on the outside, so Im just using it while waiting for my collection of serviced w9 items to return. I might just gift it to a homie to get them into w9 products, since the globe, atomizers, KISS carts, and omicron I've spread around seem to do an awesome job of converting people.
 
ragnorokk,

thegoo

Well-Known Member
@THC SCIENTIFIC
I am happy to report that I finally received my Kiss Alpha C, there were only 1 or 2 small shavings that needed to be discarded, other than that PERFECT. Thanks again for all your hard work, G!

Edit:
@THC SCIENTIFIC can you give me any tips on how to properly fill the Nibbler G with H2o? I cant get it right and the water keeps leaking through the bottom
 

darkshade

Member
see this is where the issue is, the non V4 tops have a bad low voltage circuit. Meaning the V4 tops are way better to handle the .6 ohm loads the kiss alphas need to get up and go.

I am running a brand new V2 persei i got a week and a bit ago, does this mean that my persei wont be able to handle the alpha?
 
darkshade,

arrr

Well-Known Member
@THC SCIENTIFIC about to place an order. Any coupon codes?

Also does the 510 globe come with the new black ceramic wick and to ti coil?
 
Last edited:
arrr,

Jerrymech

Active Member
Got my AC today. Running it on a cheap X6 vv battery and everything works great. Flawlessly in fact. Quality product.

This is my first experience with the ceramic heater and I'm loving it. This is what I've been looking for.

I like my okeanos but id like a more substantial bubbler to use with the AC. Are there any that work with the AC coils?

Thanks!
 
Last edited:
Jerrymech,

darkshade

Member
@THC SCIENTIFIC about to place an order. Any coupon codes?

Also does the 510 globe come with the new black ceramic wick and to ti coil?

Try w9tech

Got my AC today. Running it on a cheap X6 vv battery and everything works great. Quality product.

This is my first experience with the ceramic heater and I'm loving it. This is what I've been looking for.

I like my okeanos but id like a more substantial bubbler to use with the AC. Are there any that work with the AC coils?

Thanks!

A nibbler is being designed specificly for the alpha so just hold on as its on its way :)
 

eckstrakt

Member
@SamuraiSam received my replacement top and my old herc insulator back today. However, the 4 AW batteries, KISS cart and the 10 PTFE insulators were not included with the order.

can you check on those for me please? thanks
 
eckstrakt,

mixchu69

Well-Known Member
Hey THC Scientific,

Can you make the nibbler that you make for the AC work with the herc too? I don't want to buy 2 different nibblers.
 
mixchu69,

elmoe420

Well-Known Member
Hey THC Scientific,

Can you make the nibbler that you make for the AC work with the herc too? I don't want to buy 2 different nibblers.

The Nibbler XL for the Herc is just a little bit too big for the Kiss AC unfortunately. With some rubber bands I was able to rig it up to mostly work. So it looks like we'll need a custom AC Nibbler.
 
elmoe420,
Top Bottom