Discontinued The Persei Vaporizer for herbs and concentrates.

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer

I hope not. If you think we are expensive wait till NASA builds a vape.

You know it cost em a few million to build a pen that can write in space.

But the titanium coils are in research when we got feed back on the different sizes of coils. Mind as well do all at once right?
 
Last edited:

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer

Yes i did Bob, i noticed the link when i clicked on it and looked at it.

Also please note the original tanks? they are made from stainless steel. Something that we have already looked at was titanium versions as well. There are current restrictions we are trying to over come. That is why we came out with the coils based on wires. We can control the pore size enough even that air is still free flowing yet retaining the oil.

Once i figure this out We will have titanium versions and we will be up and running without issues. You know bob i might be a high school drop out but im no moron.
 
THC SCIENTIFIC,

Bob Loblaw

Astralnaut
never said you were, but people do miss stuff. i think he was just trying to give you some info. as was i? no matter
 
Bob Loblaw,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
never said you were, but people do miss stuff. i think he was just trying to give you some info. as was i? no matter

I know bro just that bottom line I took it to heart.

But for now the Ti is still in the works trying to figure out how we can make the coils and whats the best way. Wire coils like the current version or the Porous Ti just takes time. The more feed back we get the better we can make it.

The good thing about us is we can change with every production run. We are more fluid like that. That is why everything is modular. Helps if anyone wants to upgrade keeps customers happy that they dont have to spend more money in the long run.
 

bellas

Well-Known Member
I am looking to get an upgrade on my Persei cap. I have the old push on cap and I just invested in the Bender. I read that it isn't recommended to use the Bender with this cap because of having to press on for so long. I have only been able to find a new click on click off cap if I buy the Hammer. Problem is when I bought the Bender it came with the Rod. So it would cost me $79.00 for a new cap. Thanks for any suggestions.
 
bellas,

Mynameismud

Accessory Maker
Accessory Maker
As for the coils we are working on a titanium version so it can be torched clean. The ceramic is just not an option because fear of people scraping it and inhaling the dust.
What about the K.I.S.S cartridges? Doesnt it have a ceramic rod instead of a wick? I know i scraped my vapes with this type of design all the time to try and clean them and get the gunk off...or different ceramic? Or does the coil protect the ceramic?

But the titanium coils are in research when we got feed back on the different sizes of coils. Mind as well do all at once right?
Does that mean different sized coils and Ti version will be rleased at roughly the same time?
 
Mynameismud,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
I am looking to get an upgrade on my Persei cap. I have the old push on cap and I just invested in the Bender. I read that it isn't recommended to use the Bender with this cap because of having to press on for so long. I have only been able to find a new click on click off cap if I buy the Hammer. Problem is when I bought the Bender it came with the Rod. So it would cost me $79.00 for a new cap. Thanks for any suggestions.

Please call the office I think we should have the hammer tops sold separate.



@Mynameismud

I wouldn't recommend using the sharp edges on the ceramic. You can spread your oil like you spread peanut butter on the ceramic. Although it isn't that brittle we arnt taking the chance on having it in Herc because it's a part that comes in direct contact with the user.

As for the Ti coils we are working on a few ways to implement first we have to research a bit longer.

But we when we do release the different sizes it will be Ti hopefully.
 

vaporchaser420

Active Member
I was having the same problem as Caligula where my rod would develop a crust of black carbon, it actually happened to me twice and it killed 1.6 of my coils (I'm on my last coil cut 40percent) it completely unraveled, the first time I assumed it was because I threw some bubble hash with no screen into it, it tasted combusted to me and after I scraped some black chunky peanut butter stuff off the top, I continued to use as normal with wax, shatters etc w/o cleaning it, after a while I noticed it took me at least 1 minute to get it hot enough where I could get a decent hit, so I decided to clean it, my rod was completely stuck and a hard black carbon hockey puck had formed at the base of the top chamber, it was a nightmare to get it out, and I had to use a knife to scrap off the carbon build up, after clean up it started to hit like a champ and no more long wait time, I was getting massive hits within seconds, so lesson learned if I put anything not pure like bubble hash or herb I should clean it right after, well it happened a second time and this time I made sure I only used concentrates but this time instead of developing a hockey puck at the bottom it developed into a corndog like shell at the top of the rod, and the reason I noticed this was because it took me forever to get it to heat up, I'm not sure why this is happening but if it takes you forever to heat up it might be because of this mystery carbon build up, I do have to admit that I don't clean my sr-71 that often I just keep throwing more wax in when needed, which I think may be the problem. anyone know whats going on would help, thanks everyone
 

Silver420Surfer

Downward spiral
@asimplebeast Too funny!!
I had a friend ask me if I was carrying an ASP when he first saw the Persei/Herc.

+1 for Core to be released soon!


I was having the same problem as Caligula where my rod would develop a crust of black carbon, it actually happened to me twice and it killed 1.6 of my coils (I'm on my last coil cut 40percent) it completely unraveled, the first time I assumed it was because I threw some bubble hash with no screen into it, it tasted combusted to me and after I scraped some black chunky peanut butter stuff off the top, I continued to use as normal with wax, shatters etc w/o cleaning it, after a while I noticed it took me at least 1 minute to get it hot enough where I could get a decent hit, so I decided to clean it, my rod was completely stuck and a hard black carbon hockey puck had formed at the base of the top chamber, it was a nightmare to get it out, and I had to use a knife to scrap off the carbon build up, after clean up it started to hit like a champ and no more long wait time, I was getting massive hits within seconds, so lesson learned if I put anything not pure like bubble hash or herb I should clean it right after, well it happened a second time and this time I made sure I only used concentrates but this time instead of developing a hockey puck at the bottom it developed into a corndog like shell at the top of the rod, and the reason I noticed this was because it took me forever to get it to heat up, I'm not sure why this is happening but if it takes you forever to heat up it might be because of this mystery carbon build up, I do have to admit that I don't clean my sr-71 that often I just keep throwing more wax in when needed, which I think may be the problem. anyone know whats going on would help, thanks everyone

"...I do have to admit that I don't clean my sr-71 that often I just keep throwing more wax in when needed..."

I think you've already answered the question. :nod:
 
Last edited:
Silver420Surfer,
  • Like
Reactions: ataxian

Caligula

Maximus
Yup, I had that "corndog" thing going. I'm guessing it will become good practice to have burn off sessions with the bare rod at regular intervals.

The coils on the other hand.... ill get you mine ASAP G.
 

Silver420Surfer

Downward spiral
You could go by taste, or maybe vapor production. You also mentioned heat up time, as soon as that starts to take longer to heatup, maybe.
 
Silver420Surfer,
  • Like
Reactions: ataxian

Silver420Surfer

Downward spiral
good advice thanks, btw I see you had a dart how does it compare to the Hercules?
My dart experience started good, but I found the taste of my vb dabbler better so i switched to it. Compared to the Herc, I don't think they are in the same class. Taste with my Herc is heads above taste i got from my dart. Vapor production, also goes to herc. Good clouds with dart...INSANE clouds from my Herc. Had quite a few times where it was feast or famine regarding getting a good hit consistently(something I havent had an issue with using the Herc,after geting my technique down). Size/stealth goes to the dart. Good solid construction on dart. I never felt I got my dart completely clean despite following all recomended instructions. Liked that TET/Thermovape was made in US. Great and friendly customer service the few times I had to contact them. It just wasn't for me. I have a friend who enjoys his very much. I was just looking for a different experience. I like that if needed, I can get medicated in 1 big rip from using the Herc. Not the best comparison, but hopefully hits enough points to give you an idea.
 

vaporchaser420

Active Member
My dart experience started good, but I found the taste of my vb dabbler better so i switched to it. Compared to the Herc, I don't think they are in the same class. Taste with my Herc is heads above taste i got from my dart. Vapor production, also goes to herc. Good clouds with dart...INSANE clouds from my Herc. Had quite a few times where it was feast or famine regarding getting a good hit consistently(something I havent had an issue with using the Herc,after geting my technique down). Size/stealth goes to the dart. Good solid construction on dart. I never felt I got my dart completely clean despite following all recomended instructions. Liked that TET/Thermovape was made in US. Great and friendly customer service the few times I had to contact them. It just wasn't for me. I have a friend who enjoys his very much. I was just looking for a different experience. I like that if needed, I can get medicated in 1 big rip from using the Herc. Not the best comparison, but hopefully hits enough points to give you an idea.

thanks for the comparison I feel justified in my purchase of the Hercules and not trying to scramble to get a used dart.
 

ataxian

PALE BLUE DOT
, I can get medicated in 1 big rip from using the Herc.

I hear you loud and clear on that comment.
I don't need more gear that does the same thing?
I'll run out of room!
Flavor wise I'm pretty impressed.

More SHATTER to load tomorrow.
On top of the FULL MELT.
Everything taste good so why break it down?

My plan is every 5 grams to clean with 99% ISO.
So far I only ran about 1 gram SHATTER & 1 gram FULL MELT!

3 grams to go.
30% COIL & WHITE ROD
 
Top Bottom