Discontinued The Persei Vaporizer for herbs and concentrates.

primeform

Member
Just picked up a nibbler xl and some more 3.7 kiss carts in the meantime. Picked up some Tangelo clear from harborside, some of the tastiest stuff ive had. Been dabbing that on my new rig mostly tho. I should try some in the hercules but need to buy a couple grams of it next time for that beast since I havent gotten it working correctly yet.
 
primeform,
  • Like
Reactions: 215z

Darb

Well-Known Member
@THC SCIENTIFIC so the omicron lite does work with 3.7v herc? Also, what is up with your postage costs to Australia, i would have purchased from you already if i could get postage prices that weren't 2-3 times as expensive as any other American vendor!? I am not trying to be cheeky and get a discount, i just cant see how paying $100 for standard postage on a $60 vape can make any sense...
I'd check out Planet Vape. W9 has prevented me from ordering from them anymore because of the unreasonable shipping prices. Love the products though!
 
Last edited:

Tstat

Dead Foot Designs
Accessory Maker
Well, we are back from Colorado! I just want to say here that the Persei/Hercules performed great at 13000 feet! I had to stop and adjust the rod a couple of times, but it was no big deal on the slopes:

1972383_1409662249294444_1691169644_n.jpg


14553_1409662279294441_15008695_n.jpg


Here is what we were running through it, it's Green Crack:

1003584_1409662255961110_1464715533_n.jpg


We also used this Grape Ape with the KISS cart. Unfortunately, it died again on the last night:

1962589_1409662262627776_1321424606_n.jpg


Recreational stores were all over the place. Some were great, others overpriced. I will make a thread later today in the Lounge detailing our experience :)

10150660_1409662295961106_1614594749_n.jpg
 

Tstat

Dead Foot Designs
Accessory Maker
Yea, what does that mean? Stuff is super tasty and very potenent. I liked it so much I sent some home to myself. I also got a grape cross, but I forget what it's crossed with. My packages should arrive today or tomorrow. I sent all my Persei and Pax stuff, too.
 

kindbeats

Terps Up, Temps Down
Yea, what does that mean? Stuff is super tasty and very potenent. I liked it so much I sent some home to myself. I also got a grape cross, but I forget what it's crossed with. My packages should arrive today or tomorrow. I sent all my Persei and Pax stuff, too.

Bubbles are usually a sign of under purged oil. Ideal shatter is completely clear/bubbleless.
 

Tstat

Dead Foot Designs
Accessory Maker
Interesting. This comes from StrainWise and they have like 8 stores around the state. The shop owner told me that they send their shake and popcorn to a big company that processes it for them.

It really is the best tasting stuff I have ever tried. And I have had a few types from the dispensary here in Providence in addition to what I make with Everclear.
 
Tstat,
  • Like
Reactions: Caligula

Tstat

Dead Foot Designs
Accessory Maker
Hope the other stuff that's coming is OK. Why would they sell up unpurged shatter? And isn't it regulated and/or inspected? I also wonder why there is no strange taste. Wouldn't it taste like shit if it wasn't purged correctly?
 
Tstat,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
Hope the other stuff that's coming is OK. Why would they sell up unpurged shatter? And isn't it regulated and/or inspected? I also wonder why there is no strange taste. Wouldn't it taste like shit if it wasn't purged correctly?

to a sensitive palette yes you can taste it, but it wont taste like shit you just have to know what to look for. As far as regulation no there is none for oils atm not even for flowers.
 
THC SCIENTIFIC,

thevaf

Well-Known Member
@THC SCIENTIFIC I have a 3.7v black rod and an Omicron HVD head and was going to test out the herc using 3.7v but I cannot find my SS tube that fits my AW IMR 18490/18500 battery. Do you sell just the tubes/bottom spring without the HVD head or batteries? I would be happy to test for you.
 
thevaf,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
@THC SCIENTIFIC I have a 3.7v black rod and an Omicron HVD head and was going to test out the herc using 3.7v but I cannot find my SS tube that fits my AW IMR 18490/18500 battery. Do you sell just the tubes/bottom spring without the HVD head or batteries? I would be happy to test for you.

Pm me i have a spare tube that was used a few times for qc check, we can work something out.
 
THC SCIENTIFIC,

Tstat

Dead Foot Designs
Accessory Maker
Ok, last question and then I won't derail the thread any more. Should I be concerned about this stuff? I mean health wise, etc? I still have some of it and 2 other grams on the wa from the same company. Thanks!
 
Tstat,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
Ok, last question and then I won't derail the thread any more. Should I be concerned about this stuff? I mean health wise, etc? I still have some of it and 2 other grams on the wa from the same company. Thanks!

put it in a 120F location with no light and over night should clear it up i think. This is most likely caused by crappy butane.
 
THC SCIENTIFIC,

thevaf

Well-Known Member
Ok, last question and then I won't derail the thread any more. Should I be concerned about this stuff? I mean health wise, etc? I still have some of it and 2 other grams on the wa from the same company. Thanks!

Not really, butane is inert and non-toxic. The only time it is really harmful is if it replaces all the oxygen in your lungs.
However, it does affect the taste, and will cause sizzling/popping on a TI Nail which most dabbers do not like.
 
thevaf,

syrupy

Authorized Buyer
Got a core and a Herc black rod on the way. Really liking using the Hammer with a quartz nail, but it's tough on the batteries, even the AW ones. Also looking forward to playing with the Hercules at 3.7v.

Been doing the herb/oil vaping that @THC SCIENTIFIC was talking about a few pages back. It works better than I expected. Might even look at getting a 2nd SR dedicated for herbs&oil.
 
syrupy,

Mynameismud

Accessory Maker
Accessory Maker
Got a core and a Herc black rod on the way. Really liking using the Hammer with a quartz nail, but it's tough on the batteries, even the AW ones. Also looking forward to playing with the Hercules at 3.7v.

Been doing the herb/oil vaping that @THC SCIENTIFIC was talking about a few pages back. It works better than I expected. Might even look at getting a 2nd SR dedicated for herbs&oil.
Yes its definitely neat. Tried it when i first got my herc. It just can be really messy... I wish there was a capsule you could put in there instead of just the screen. (I guess you could use two screens too) but That way herbs dont get everywhere and itll be easier to get out then just a screen if you wanna go back to oils...
 
Mynameismud,

syrupy

Authorized Buyer
Yes its definitely neat. Tried it when i first got my herc. It just can be really messy... I wish there was a capsule you could put in there instead of just the screen. (I guess you could use two screens too) but That way herbs dont get everywhere and itll be easier to get out then just a screen if you wanna go back to oils...

I totally hear you. With the herb/oil combo, I do it load-as-you-go, just a little oil and flowers in there. Because like you said, it's a bit messy and I'll want to clean it afterwards. Today I'm going to try cutting a very thin disc out of the SS coil (like 5% of coil) and putting that in between. I imagine it like this: the Herc rod heating the oil coil, then a screen, then the 5% coil, then flowers.

Edit: That worked pretty well. The coil was closer to 10%, couldn't get it cut finer with the implements handy. Also just put the short coil on top of the regular coil, as well as not grinding the flower material. Good stuff!
 
Last edited:

Mynameismud

Accessory Maker
Accessory Maker
I totally hear you. With the herb/oil combo, I do it load-as-you-go, just a little oil and flowers in there. Because like you said, it's a bit messy. Today I'm going to try cutting a very thin disc out of the SS coil (like 5% of coil) and putting that in between. I imagine it like this: the Herc rod heating the oil coil, then a screen, then the 5% coil, then flowers.
Yeah let us know how that goes... I never tried small amnts using both because the couple times i tried it was pretty messy like i said. So i figured less meant more mess/ more loading etc...
 
Mynameismud,

Caligula

Maximus
@THC SCIENTIFIC

Okay get this bro...

I had been using my 3.7 Ti KISS on my shorty SS Persei. Worked well until recently, where it would barely heat.

Figured it was the battery.

Put a fresh AW 18350 in but same issue?

Looked and the wick was pretty dirty so I iso soaked it and cleaned it throughly.

After drying I go to do a burnoff and notice that the wire takes a long time to heat up and glow. Well longer than normal.

I try the other EFEST 18350 battery which was done charging. Same issue.

Okay... well at this point, just for fun, I throw it on the Ophos and wouldnt you know it, the shit fired up and glowed!

WTF? Maybe the Persei head? So I tried the other Persei head that I use with my Hercules (so I know for a fact it works).

This time I cant even get the thing to fire! Button wont glow blue on the head and no heat to the wire.

Put it back on the Ophos and it fires up again!

Im at a loss as to WTF is going on here.
 
Caligula,

Caligula

Maximus
Sounds like a battery issue brother!

Dude, that was my first thought too. Thats why I tried two different AW branded 18350 batteries and an Efest 18350. I also made sure each battery was fully charged. Either that's an incredible coincidence and all my batteries are bad, or (more likely) its not the batteries?
 
Caligula,

herbivore21

Well-Known Member
The battery is housed in a capsule isn't it? The issue you are having sounds like something dodgy with the connection between the persei battery and the atomizer. Seems like @THC SCIENTIFIC are pretty brilliant with service though, so I'm sure you'll be sorted soon enough :)
 
herbivore21,
Top Bottom