Discontinued The Persei Vaporizer for herbs and concentrates.

Scott G

Scott G

Ridin Dirty
hansdampf said:
any news about the herculesV2? i dont know if it was already answered, so sorry if yes.. i remember something about the hercules ready for 420? but i'm not sure..
Click to expand...
i wouldn't count on it. they have just recently started testing on it.
 
Scott G,
TommydCat

TommydCat

Well-Known Member
The nail you use for the Hammer really seems to impact the effectiveness. For instance, I have a Cosmic adjustable 19mm TI nail that makes puddles. I have a glass nail that seems to work just fine! (And I usually hear it's the other way around)

Perhaps we should poll what nail/equipment people are successfully using with the Hammer?
 
TommydCat,
  • Like
Reactions: Scott G
Bob Loblaw

Bob Loblaw

Astralnaut
TommydCat said:
The nail you use for the Hammer really seems to impact the effectiveness. For instance, I have a Cosmic adjustable 19mm TI nail that makes puddles. I have a glass nail that seems to work just fine! (And I usually hear it's the other way around)

Perhaps we should poll what nail/equipment people are successfully using with the Hammer?
Click to expand...
agreed! the leela should be a perfect fit for this, but until then i use a small 14mm cup nail. stab and dab. best results. i do love my demo leela for this and am sure the final cut will be even better!
 
Bugsy

Bugsy

VapeHare
Bob Loblaw said:
agreed! the leela should be a perfect fit for this, but until then i use a small 14mm cup nail. stab and dab. best results. i do love my demo leela for this and am sure the final cut will be even better!
Click to expand...


Bob can you describe the Leela to us......I was just about to buy a nail.
never mind see the link
 
Bugsy,
Scott G

Scott G

Ridin Dirty
got any recent video of your demo leela bob? i see you got some youtube demoing going on. you get the hammer going pretty good.
 
Scott G,
THC SCIENTIFIC

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
Guys I'm working on the Hercules as we speak I should have a working prototype end of week.

Also a cool feature we added was you can completely take the Hercules apart all the parts and clean it or reclaim any oil lost. Just wait for it please. We removed all solder And wires. This thing is sweet once it's done testing starts next week.
 
Bob Loblaw

Bob Loblaw

Astralnaut
THC SCIENTIFIC said:
Guys I'm working on the Hercules as we speak I should have a working prototype end of week.

Also a cool feature we added was you can completely take the Hercules apart all the parts and clean it or reclaim any oil lost. Just wait for it please. We removed all solder And wires. This thing is sweet once it's done testing starts next week.
Click to expand...
can't wait!!
 
ataxian

ataxian

PALE BLUE DOT
The HAMMER!
Thanks Bob for posting the videos!
Can't wait to use with the BENDER!
Just think it works for LEALA as well!
The_Hammer_Black_Top_2B__83334_zoom.jpg
 
DubCRider

DubCRider

Well-Known Member
Th
Scott G said:
i got the 1200* one i believe. i got the one that comes with the top that has the button you don't have to hold down. i hear you on the taste, but when i personally am at the rig, i'm looking to drop bhombs and the hammer just can't do it how i want. (perhaps there is a technique for this i haven't mastered) hopefully i never get in the situation where i got no gas for my torch. tend to keep a case or two of tane in the closet anymore. plus now i only bust the torch out on the weekends instead of multiple times everyday. persei has replaced the rig during the week and replaced having to burn up flower when out and about but when i'm ready to get a one hit blast, rig and torch always got my back.

i'm still puffin on a single 2.4ohmer so who knows, maybe the rig can be phased out completely when i finally get around to double 5ohmers... but for now, 2.4 is kicking ass and taking names! haven't burnt up any flower since i've got this thing and that alone is fucking awesome. i'm loving this vapor only lifestyle!
Click to expand...

The one that comes with the on/off top is the 750*, the 1200* has it marked.
 
DubCRider,
  • Like
Reactions: OF
r0me

r0me

Well-Known Member
DubCRider said:
Welcome to the fun of sharing! It beats a friend knocking over an expensive bong and never getting payment...

Do you have the 750* or 1200* hammer? I wasn't impressed myself while using the 750* for oil but the 1200* gets the job done. I wouldn't say it replaces a torch in normal situations but it does a good job when you run out of fuel after store hours. I also find it to give a tastier hit since its not as hot as a torched nail preserving terpenes.




Here is front and back photos of the three generations of tops. If yours looks like the one on the left side in either photo you should follow the instructions in the post you quoted.

75EF74A7-80C8-42E7-AE5C-50A6F6838621-1702-0000028BF879AEBC-1.jpg


DC5F7F51-5034-4E5D-A16C-7AF66928EC59-1702-0000028C0ABAB4AF.jpg
Click to expand...
okay! thanks for the quick response. so what exactly do i send in and where do i send them, thanks for you time again!
 
r0me,
ataxian

ataxian

PALE BLUE DOT
DubCRider said:
Th

The one that comes with the on/off top is the 750*, the 1200* has it marked.
Click to expand...
The Hammer attachment is used for vaporizing herbs in your water bowl, or extracts with your titanium nails. The Hammer Rod will have a 6 month warranty from date of purchase with original reciept. The Persei top has a limited lifetime warranty. The top features a 2 minute cut off timer and can reach temperatures of up to 1200F in about 45 seconds. It is not recommended that you use this top for any oil cartridges as it can and will damage your cartridges.The Hammer works best with the pass through system.

So I ordered something that doesn't work with the BENDER?
 
ataxian,
  • Like
Reactions: Scott G
Scott G

Scott G

Ridin Dirty
DubCRider said:
Th

The one that comes with the on/off top is the 750*, the 1200* has it marked.
Click to expand...

i see. thats my problem i guess. the delta9 site is very misleading with that top. ataxian posted its exact description above. doesn't say anything about 750* and specifically mentions 1200*. live and learn i suppose.
 
Scott G,
Bob Loblaw

Bob Loblaw

Astralnaut
it's not necessarily. does it say 1200 on it? i was pretty sure they had run thru their stock of 750 hammers. it was the first one. not useable for much, honestly. you can buy a 1200 cart separately, just in case.
 
Bob Loblaw,
  • Like
Reactions: kindbeats
Scott G

Scott G

Ridin Dirty
i'll double check when i get home so we know if the new units are sent out 750 or 1200. i'll even toss up a pic to verify... home is only.... 6 hours away.... meh... work.... ::looks at persei:: gonna step outside for a few!
 
ataxian

ataxian

PALE BLUE DOT
Scott G said:
while we are talking about it... what CAN you use the 750* hammer for?
Click to expand...
I will receive the new top today (I believe?)
I'll see how it works with the BENDER.
The 1200 HAMMER worked so well in my case.
750 HAMMER?
What does it do?
Good question Scott!
 
ataxian,
  • Like
Reactions: Scott G
You must log in or register to reply here.
Top Bottom