Discontinued The Persei Vaporizer for herbs and concentrates.

THC SCIENTIFIC

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
torggzorz said:
it won't work above above 5.6 on the core, or with fully charged 18350 AW IMR x2, but works ok with single 18650... I haven't tried lightsabre mode, guess I will try that :p

EDIT: It worked for one glorious puff in lightsabre mode, but now is back to red flashing :(
Click to expand...

Do this, unscrew the kiss Ac press the button and screw it in, once the ti glows for a second or two it should be good to go.
 
THC SCIENTIFIC,
torggzorz

torggzorz

All your Vape are belong to us
THC SCIENTIFIC said:
Do this, unscrew the kiss Ac press the button and screw it in, once the ti glows for a second or two it should be good to go.
Click to expand...

Oh wow, NICE. That worked like a charm, thank you. I did exactly as you said and screwed the AC into my v4 + core @ 7.4V while the button was pressed and already blue. I got huge rips from the residual oils, and started to glow orange fully throughout coils with a little test at the end of the session. I did have to rescrew the device once again to get it to fire again during the sesson. It seems like it is temperature dependent, now that the device has cooled I'm back to red flashing light. I'm glad I could get it to work, it raises a concern of causing arcing between the persei centerpin and ac centerpin if I have to do this multiple times every session though? I have found that v4 centerpin notoriously hard to clean off... neverless of arcing oxidation... o.O
 
torggzorz,
THC SCIENTIFIC

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
torggzorz said:
Oh wow, NICE. That worked like a charm, thank you. I did exactly as you said and screwed the AC into my v4 + core @ 7.4V while the button was pressed and already blue. I got huge rips from the residual oils, and started to glow orange fully throughout coils with a little test at the end of the session. I did have to rescrew the device once again to get it to fire again during the sesson. It seems like it is temperature dependent, now that the device has cooled I'm back to red flashing light. I'm glad I could get it to work, it raises a concern of causing arcing between the persei centerpin and ac centerpin if I have to do this multiple times every session though? I have found that v4 centerpin notoriously hard to clean off... neverless of arcing oxidation... o.O
Click to expand...

Get it to glow a few times, see if that changes, we have fully tested with 18350's and they work on a full charged status, as for the core there could be issues because the current limit on the core.
 
THC SCIENTIFIC,
vjt324

vjt324

Well-Known Member
I'm also having issues firing the K.AC on 7.4 dual coil. I also tried the single on 7.4 and that didn't work either.
 
vjt324,
B

bdmonkeyj3w

Well-Known Member
Holy shit... firing the herc at 7.4v is outta this world!! I think it tastes better than the 3.7, at least through the life of the bowl. The life of the bowl however... 7.4 doesnt conserve shit! Dont need hammer top/mode for that at all. If i purchase an sr 71 and put it on my sr 74 bottom plate, will i be able to stuff it in a herc?
 
lonelyhero

lonelyhero

the lost soul
Company Rep
The sr71 is a complete herc just doesn't include a coil you can just drop in one from your 74 that's what I did
 
lonelyhero,
Darb

Darb

Well-Known Member
I know it's not ready yet but will the V2 Iris possibly be offered as a complete vaporizer? Maybe packaged with the 8 bottom tubes. Just a thought I had while enjoying my V1 Iris and SR-71
 
tharealmclovin

tharealmclovin

Well-Known Member
Darb said:
I know it's not ready yet but will the V2 Iris possibly be offered as a complete vaporizer? Maybe packaged with the 8 bottom tubes. Just a thought I had while enjoying my V1 Iris and SR-71
Click to expand...
I kinda like the contrast of the chrome on my black tube. But if a matching tube came with, I would not be mad.
 
tharealmclovin,
lonelyhero

lonelyhero

the lost soul
Company Rep
Dropped my 8 for the first time today and my fuse broke and there are indents on the bottom of both batteries now pretty upset been a really shitty week
 
lonelyhero,
  • Like
Reactions: masaki
vjt324

vjt324

Well-Known Member
masaki said:
AC dual coil + Okeanos @7.4 is pretty fucking awesome!

I also got a chance to try the 1701 which I like as well.
Click to expand...

Do you have a v4 top?
Is your top firing the 7.4 consistently??!

I can get mine to fire but only if I screw it on at the same time I press the button.

Edit.
Just tried it w the chrome v2 top I just bought and it works. It's a fucking Monster in the okeanos. This might finally put that tool in rotation. I just got a nail sized hit, easily a .1

Now it only has to work on my pretty new touch top and well b great.
 
Last edited:
DaNi_DuB

DaNi_DuB

Vapor Enthusiast
@THC SCIENTIFIC or @SamuraiSam , any update on the new hammer rods? Specifically, will they be backwards compatible with the bender? I'm pretty sure you guys are phasing bender out (just don't hear people talking about it like they used to) & I just want to stock up on heaters just in case.
 
DaNi_DuB,
  • Like
Reactions: bdizz
torggzorz

torggzorz

All your Vape are belong to us
THC SCIENTIFIC said:
Get it to glow a few times, see if that changes, we have fully tested with 18350's and they work on a full charged status, as for the core there could be issues because the current limit on the core.
Click to expand...

Got it glowing a few times, now it seems to work consistently without too much fuss in 7.4V mode. Now just need those glass globes to come out, I broke mine real quick like I knew I would LOL :) Thanks for the metal top cap option at least! Boroglass globe for ac?!
 
torggzorz,
D

darkshade

Member
I just realised somthing, I have absolutely no idea how to fill the nibbler xl, can't find ANY info anywhere online either! I seen the video where Gary shows you how to insert but there is zero info on how much or how to fit it. Admititly I have not really played with it at all, not trying to break it before my herc comes in!
 
darkshade,
lonelyhero

lonelyhero

the lost soul
Company Rep
darkshade said:
I just realised somthing, I have absolutely no idea how to fill the nibbler xl, can't find ANY info anywhere online either! I seen the video where Gary shows you how to insert but there is zero info on how much or how to fit it. Admititly I have not really played with it at all, not trying to break it before my herc comes in!
Click to expand...

as a general guidline keep the water below the uptech logo personally id fill it either really low or just under the logo the then add or subtract water till it feels best for you
 
lonelyhero,
  • Like
Reactions: darkshade
You must log in or register to reply here.
Top Bottom