Discontinued The Persei Vaporizer for herbs and concentrates.

detroit_fan

Well-Known Member
From left to right:

The 8 + Aspire Atlantis
Persei v3 + Kiss Globe + Nibbler G
Core + Hammer Top + Hammer Rod
Aspire CF Mod
Omicron v2 + Kiss Ti
Omicron Lite + Kiss Ti
Vaporizer + Kiss Mini

uu1Utzul.jpg


You can see an Okeanos v2, Protank, and Nibbler GN hiding in the background too.
thank you! that picture helps me so much. looking on the website, i thought the vaporizer would be much smaller than it is in this pic. it doesn't look too much stealthier than my omicron lite. what really suprises me is the omicron size, i thought it was bigger compared to the omi lite. now that i see the omicron is not much bigger than the lite, i think i'll grab one.
 
Last edited:
detroit_fan,
  • Like
Reactions: elmoe420
Word, nice line up pic.

I notice that Okeanos is just sittin there, unattached, even though there are clearly KISS carts on some of those pens...
Opinions on it vs a nibbler g?
 

detroit_fan

Well-Known Member
That pic is going to cost me a lot of $$, cause now I want that vaporizer, and a minicron lite too compare the 2. I also want the omicron now. I might as well just give in and order 1 of everything at this point :)
 

ED421

Well-Known Member
Word, nice line up pic.

I notice that Okeanos is just sittin there, unattached, even though there are clearly KISS carts on some of those pens...
Opinions on it vs a nibbler g?
I have not used the Nibbler G, but I love my Okeanos! It's well built and the only breakable part is $15 to replace. Hits like a champ!
 

BK89

Well-Known Member
I just received my Persei but there appears to be an issue with the top. It will not fire in 7.4v mode (just get the flashing light). I happened to have a 18650 battery and tried that - works no problem in 3.7v mode. Also, I jsut happen to have an old v1 top. 7.4v mode works just fine with that top (so I know its not the batteries). I don't understand why its works fine in 3.7v mode but not in 7.4v mode? Any else ever run into this?
 
BK89,

elmoe420

Well-Known Member
Word, nice line up pic.

I notice that Okeanos is just sittin there, unattached, even though there are clearly KISS carts on some of those pens...
Opinions on it vs a nibbler g?

I only use the Okeanos in two situations. First is when I am out and about because there is very little glass to break or draw unwanted attention. The second is because I am hitting a 7.4v Kiss. In that case I want to both see the vapor and cool it down.

The Okeanos will never compare to a Nibbler in terms of performance. For me the Nibblers are used at home the Okeanos is used when I am headed out for the night.
 

heideana

Well-Known Member
Does anyone know if there's directions somewhere on how to rebuild KISS carts using the Titanium Rebuild kit?

Also, can you use the Core with the 8 vaporizer?

Best and thanks for any help or direction...
 
heideana,

Severmore

Well-Known Member
Does anyone know if there's directions somewhere on how to rebuild KISS carts using the Titanium Rebuild kit?

Also, can you use the Core with the 8 vaporizer?

Best and thanks for any help or direction...
Please see @DieHard 's recipe
It was written with nichrome in mind, but the process should be similar with Ti, though you may need to play with # of wraps.
 
Severmore,
  • Like
Reactions: heideana

spoutti

Well-Known Member
I just received my Persei but there appears to be an issue with the top. It will not fire in 7.4v mode (just get the flashing light). I happened to have a 18650 battery and tried that - works no problem in 3.7v mode. Also, I jsut happen to have an old v1 top. 7.4v mode works just fine with that top (so I know its not the batteries). I don't understand why its works fine in 3.7v mode but not in 7.4v mode? Any else ever run into this?
Yes, with fully loaded batteries, v3 top, and my herc sr71. A hammer top doesnt seem to missfire at all though. You should open a ticket on their web site to get things going
 

detroit_fan

Well-Known Member
at this moment we do not have them. i do apologize.
Ok thanks for checking.

From left to right:

The 8 + Aspire Atlantis
Persei v3 + Kiss Globe + Nibbler G
Core + Hammer Top + Hammer Rod
Aspire CF Mod
Omicron v2 + Kiss Ti
Omicron Lite + Kiss Ti
Vaporizer + Kiss Mini

uu1Utzul.jpg


You can see an Okeanos v2, Protank, and Nibbler GN hiding in the background too.
Do the regular Ti kiss carts fit on the vaporizer or only the kiss mini?
 
Last edited by a moderator:
detroit_fan,

MaxVapor

The Professor
I do huh, well lets just say i used something that was designed for 7.4v and it works with 3.7v.

Have you gone and broken the laws of physics G? You know your shop is probably only 30 miles or so from my house, if you go and open a black hole there is gonna be hell to pay.

As to the AC, have you confirmed wether or not it uses ceramic wicks, and if so are they the black or white (not being racist).
 

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
Have you gone and broken the laws of physics G? You know your shop is probably only 30 miles or so from my house, if you go and open a black hole there is gonna be hell to pay.

As to the AC, have you confirmed wether or not it uses ceramic wicks, and if so are they the black or white (not being racist).

No laws broken just discoveries :-).


As for what the Alpha C has im not saying anything yet.
 

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
When can we expect this new attachment to be released or go up for sale?

The Kiss Alpha Centauri will go on pre orders on April 15th.

Guys please understand this is the first run of the Kiss Alpha Centauri and if there are issues then it will get fixed. The design is modular so fixing it will be a breeze.

Anyone ordering these will be acknowledging that if there is an issue we will handle it at our cost.
 

DieHard

Accessory supplier
Accessory Maker
No laws broken just discoveries :-).


As for what the Alpha C has im not saying anything yet.
Maybe it will have a miniature fission reactor and instant, true sublimation will be achieved.

I can dream.

The Kiss Alpha Centauri will go on pre orders on April 15th.

Guys please understand this is the first run of the Kiss Alpha Centauri and if there are issues then it will get fixed. The design is modular so fixing it will be a breeze.

Anyone ordering these will be acknowledging that if there is an issue we will handle it at our cost.
I'm in!
 
Top Bottom