Rodney
Well-Known Member
hot rodded CU's?? sounds wonderful, but what is it so i can get one??
The Mighty/Mighty+ by Storz & Bickel
- Thread starter Roger D
- Start date
hot rodded CU's?? sounds wonderful, but what is it so i can get one??
Take factory CU and remove the screen. Then, install a titanium mouthpiece in place of the factory mouthpiece. Titanium mouthpiece should not be rotated as the silicone gasket fit is not as good as factory. This is only for use with the factory dosing capsules. I got this tip from another member on this board. I did not come up with the idea. I have found performance and efficiency of extraction to be far better than native use. Airflow is much improved.
Rodney
Well-Known Member
guys i just got this and at first I thought it was not good but after some closer use am finding this very good to use.
www.alibongo.co.uk
Glass Mouthpiece Suitable For Crafty & Mighty | Next Day Delivery Available
A straight glass mouthpiece suitable for a Crafty, Crafty+, Mighty, or Mighty+ vaporizer. Browse the best vape accessories with Free UK Delivery Available.
www.alibongo.co.uk
vapviking
Old & In the Way
guys i just got this and at first I thought it was not good but after some closer use am finding this very good to use.
Glass Mouthpiece Suitable For Crafty & Mighty | Next Day Delivery Available
A straight glass mouthpiece suitable for a Crafty, Crafty+, Mighty, or Mighty+ vaporizer. Browse the best vape accessories with Free UK Delivery Available.
Yes those spikes (dimples) really make a difference. I've been meaning to pick up one of those. I use wpa and a spiked u-hook sometimes, though generally I'm back to the stock c\u these days, having use many methods.
With all the attachments that use this type of attachment 'base', my experience is that the supplied screen is set too far above the oven. I remove that one and either lay a simple flat screen atop the bowl, or form it into a slight dome and fit it in the end of that glass piece, dome-side down towards the bowl.
I don't recall if simply using a capsule is a good solution, but I rarely use caps anymore.
Strolling&Rolling
Well-Known Member
Hi all,
I ordered a Venty but got caught up in the cancelled deliveries due to the device issue, there's no timeframe on when the Venty's will be ready so I'm tempted to just cancel the order and get a Mighty Plus.
Do you think this is a good idea or should I wait? Would I regret the decision to cancel? Is there much noticeable difference with the devices?
I'm currently using a XMAX Starry V4 as portable and have a Volcano Hybrid desktop.
I ordered a Venty but got caught up in the cancelled deliveries due to the device issue, there's no timeframe on when the Venty's will be ready so I'm tempted to just cancel the order and get a Mighty Plus.
Do you think this is a good idea or should I wait? Would I regret the decision to cancel? Is there much noticeable difference with the devices?
I'm currently using a XMAX Starry V4 as portable and have a Volcano Hybrid desktop.
darbarikanada
Well-Known Member
all the reviews I've seen so far say that the venty has much more open airflow but the vapor's still cool. one person compared it to a portable volcano. there seems to be pretty much universal agreement that it's a big step up from the mighty, but if you don't care if it takes more hits to finish a bowl (mighty's ~10 to venty's ~3-4), and if the mighty's slower warm-up isn't an issue, you'd probably be ok with a mighty.
Bonesvapechi
Well-Known Member
I would wait tbh. The Venty is well worth it. IMO
I was referring to Venty user comments that the new vape retains heat longer than the Mighty+ and thus requires removal of the capsule between sessions or otherwise the material continues to be heated after the unit is turned off. If true that would be a deal killer for me.
HughJass
Well-Known Member
If that’s actually a restriction you probably shouldn’t have a mighty or venty at all. It sounds like what you want is something with on demand convection heating, like the bowle or TM. (Only heats the herb when you inhale, like the venty but without the conduction heating you’re displeased with)
Your reasoning is almost the equivalent of saying ‘I’d rather have a Prius over a Porsche because I don’t want to use the tires’.. well yeah that would technically work, but it would be far simpler to just ‘learn how to drive without roasting the tires’ so to speak. (Especially when doing so takes almost no effort or time, and the devices are almost the same price)
I’m sure it is slightly hotter- But I wouldn’t leave the capsule in the mighty or mighty+ either…they still cook in the OG mighty for about 5min or so (I’ve opened one about that long after a session and the bowl was still hotter than I expected)
Regardless you should probably avoid leaving herb in any device. Again it takes less than 30 seconds to take the capsule out and place it into an, airtight and conveniently named, ‘capsule caddy’ to store until your next use.
RustyOldNail
SEARCH for the treasure...
Bought 2 sets of (5) TITANIUM CAPSULES.
FAST heat up, FAST cooldown. Similar performance to the “aluminum” S&B capsules, but with QUALITY build, should last long. Use a discount code, as the titanium isn’t cheap, but well worth it to me.
If you like to RETAIN heat for darker roasting, there is a less expensive Stainless Steel version choice on the same page below.
vgoodiez.com
FAST heat up, FAST cooldown. Similar performance to the “aluminum” S&B capsules, but with QUALITY build, should last long. Use a discount code, as the titanium isn’t cheap, but well worth it to me.
If you like to RETAIN heat for darker roasting, there is a less expensive Stainless Steel version choice on the same page below.
Dosing Capsules w/Caddy (Choose Material) for Crafty/Mighty/Venty/Volc
Choose from Titanium or 304 stainless steel, the pods can be filled and swapped quickly. Five per package, includes capsule caddy with smell proof seal and key ring. Great substitute for the aluminum dosing capsules that are more common for the Crafty/Mighty/Venty/Volcano. These are stainless...
popitup
Well-Known Member
We all have our own styles and preferences! It is not necessary to remove capsules after initial use! All you need to do is to take a clearing draw after you turn the device off. That clears any residual vapor and lowers the oven temp. You can come back hours later and finish a capsule off with no negative effects.
I would not pay for a Venty if it could not out perform a Mighty OG. Right now there are conflicting reports on using capsules with the new Venty and rollout problems are probably making evaluation more difficult. I am in no hurry. I can just sit back and follow how this plays out over the next few months.
SureMustBeNice
New Member
Hi guys. Long time S and B product user here. i had a (faulty) OG Crafty, OG Mighty (clogged airpath, rip) and a Crafty+ that wont see the next spring most likely.
i am going to buy me a new Vapo soon and was thinking about getting a Mighty again. to my surprise they still sell the OG one along with the new + model. price difference is about >100 Euro tho and i wanted to ask you guys if that is worth it or not.
i am going to buy me a new Vapo soon and was thinking about getting a Mighty again. to my surprise they still sell the OG one along with the new + model. price difference is about >100 Euro tho and i wanted to ask you guys if that is worth it or not.
vapviking
Old & In the Way
Why not go straight to the new Venty?
....but if you have narrowed it down, my thought would go with an OG Mighty. Prices will be even lower now that Venty is out, and Black Friday is basically underway, so the timing is good. I haven't had a +, but have had several Crafty's and then a couple of the OG Mighty's.
If my Mighty were dying, I would go to a Venty before the Mighty+, people are saying the experience is qualitatively different with Venty.
SureMustBeNice
New Member
I was thinking about the Venty, but it is priced that high, i could get two OG Mightys for the price. Furthermore i will observe the durabilty of the device. A brand new Vapo with great vapour quality is nice, but If i have to fill RMAs and resend it, thats a bummer. Will wait fort the price to come down a lot and/or until the Venty was run through the stress test for a good amount of time by the hivemind.
Anyways, i am interested to hear how different the OG Mighty and the + version really are.
Octavia
No thoughts, head empty
Not very from what I’ve seen. Vapour is roughly the same, but the main differences I’ve seen are:
Plus:
- Usbc charging, faster charging than OG with a supercharger (3hr regular usbc, 1hr super)
- Ceramic lined oven that heats up faster (~60s vs 90s on the OG).
- Look and feel changes to be slightly easier to hold and charge (namely the power button and charging port are on opposite sides)
OG:
- Includes a grinder and loading tool in the box
- Faster charging than the plus without using a supercharger (2hr)
Here’s a thorough comparison: https://www.planetofthevapes.com/blogs/blog/mighty-vs-mighty-plus
If I missed something let me know, haven’t personally used either but been eyeing them occasionally.
Think I read recently that there were more or larger air holes at the top of the oven? Might have been some pics comparing the two? Think it was a user observation and not something advertised by the factory?
Last edited:
Rodney
Well-Known Member
I have been using my Mighty+ today after using the Tinymight2 for 1 week and at the very start of the session things felt very underwhelming but in all honestly I can still have a great time with the Mighty+ it is just ti does not hit as hard initially as the Tinymight2 or go to as high temp but it is still a very good vape to have a good time with.
Dr. G
Vapman Collector*Vapman Beta Tester
Since I have been waiting for my redo Venty next week...I have brought out the Mighty Plus and purchased the adaptor from POTV and got some glass for it. I am excited to try it like this...the Mighty is a great vape...after using the Venty...the Mighty- it is still a great vape but, I prefer the Venty. Regardless, I am so very excited to get the adaptor for the Mighty Plus and use it differently.
disGRUNTled
Well-Known Member
First post in this thread was on Dec 16, 2016, Mighty still hitting like a heavyweight vaping some Punch Cake .
Once you get your updated Venty and get some time with it please share your thoughts on how it compares to the Mighty+? I suspect lots of members are very interested? I like some of the engineering changes they made with the Venty! The more experience I get with S&B the more I believe they don't do anything without serious thought. The Venty should outperform the Mighty+.
Man, thanks for the acknowledgement cause I really was thinking I might be crazy? It just seems like a sweetspot. I was really shocked and pleased at the improvement! Did you have the Mighty OG and if so is there any difference in performance between the 2 Mighty's? The thing that impresses me is it is not the absolute most thorough extraction nor the biggest clouds but the performance is so consistent and I never mention the vape stays quite a bit cleaner. Very significant improvement in my case.
Dr. G
Vapman Collector*Vapman Beta Tester
Well, I love my Mighty Plus there is no doubt it is Mighty...I still use it even after purchasing the Venty. But, since the Venty is at home...it is far superior in airflow and battery life. Just those two things alone makes me use the Venty more...if I was going to choose because I was purchasing one or the other for the first time...I would choose the Venty. I would save my money because now there are deals everywhere for the Mighty and Mighty Plus...and purchase a Venty. I know that the Venty had a major hiccup starting off...but, in my humble opinion and from my experience...the Venty is a beast. Now, in all fairness...the Mighty Plus is an amazing product. I love it still. Everyone has a different experience...but, these two can be compared...and the technology on the Venty is different and improved. So, it's really an individual taste...