The Mighty/Mighty+ by Storz & Bickel

[vapviking]

Welcome to posting in the forum.
You may be starting at a higher temp than necessary, if you want to temp step your way up.
Start maybe 170 (some folks even lower) and up by 10-15 every few draws.

If you had increased the temp to 195 and started with capsules, 1. You could just be using up the material a little faster because higher temp=faster extraction and 2.There is less to start with in a capsule.

Of course, number of draws per chamber can vary a lot with potency of material.
I think more important is, are you getting the type of extraction you enjoy? For some folks, 1000% extraction is never the goal; they enjoy flavor and a lighter head.
But Mighty is going to give very, very good extraction even at 190, so it's not so surprising that hits above that might be wispy.

 

[XÆA-12]

Yes Im getting the effect quite as I want but the feeling in the lungs is differently than it was with the fenix but I guess that I just have to get used to it.
When I start my session on a lower temp it also produces good vapor but only for a few hits and as soon as I decrease the temp it stops

 

[darbarikanada]

I got a Mighty a couple days ago and the first few Sessions were Great it Produced a good amound of vapor and the herbs lasted für about 12 puffs at 190 degrees C. I increased the Temperatur in 10 degree steps Till max But After 190 degrees there was no real vage coming out. Is this normal because betöre the Mighty i used the fenix one and I usually Started at the lowest temperature and ended on the highest but compared to the mighty it still produced a decent amound of vapor?! Now After someone days I used the Mighty with the capsules and the same herbs at 195 degrees and it only vapes for about 5 puffs? Is this normal for the mighty and the herbs are maybe to dry or is it possible that its broken?

the temperature at which the mighty stops producing vapor will vary, depending on the strain, grind, age of the weed. for example, older, drier, finely ground weed might not produce much vapor above 180ºC.

 

[Djsleepy]

My order from Mighty on the way! Stuff is a movin'!

 

[happynomoretobacco]

Yes Im getting the effect quite as I want but the feeling in the lungs is differently than it was with the fenix but I guess that I just have to get used to it.
When I start my session on a lower temp it also produces good vapor but only for a few hits and as soon as I decrease the temp it stops

is the mighty worth six times the money compared to the fenix?

 

[Manity]

is the mighty worth six times the money compared to the fenix?

YES

 

[vapviking]

is the mighty worth six times the money compared to the fenix?

That's gonna be very subjective and individual preference-based. Something 'worth it' to me may not be so for someone else.
I would buy a Mighty over just about any other portable, it fills a great spot in the line-up. Great for an individual, even better for session w/two or more folks, it's very friendly once you get past the hand grenade look of the thing!

 

[Djsleepy]

Received my order ! Keep your eyes peeled out for your deliveries!

 

[dillsnufus]

Trying so hard to wait for the mighty+ . Hope it’s worth it

 

[disGRUNTled]

The Mighty is such a hard hitting vape...One bowl of Gorilla grapes & I am stoned outta my mind....Listening to Action Bronson.

 

[Socks And Sandals]

Real quick guys, has anyone been able to log into their PIU account? A really cool dude named Alex told me they are making some major changes to the site but didn't say if we would ever be able to log into our old accounts again. I have already sent my mighty back to them but I'm worried about the package.. I first took it to the UPS store, then they told me to take it to USPS? I have never seen anything like this.. I have a tracking number now but it's USPS.. that's my first issue I'm worried about.

Also my 4/20/20 order from S&B still hasn't shipped.. What the fuck is going on with them? I remember some of you said you had orders from them well before I did.. did you guys get your orders?

I'm really hoping PIU will just replace the whole Mighty. It really shouldn't have fingerprints behind the screen and shouldn't be dropping 25 degrees between pulls either..

 

[vapviking]

Real quick guys, has anyone been able to log into their PIU account? A really cool dude named Alex told me they are making some major changes to the site but didn't say if we would ever be able to log into our old accounts again. I have already sent my mighty back to them but I'm worried about the package.. I first took it to the UPS store, then they told me to take it to USPS? I have never seen anything like this.. I have a tracking number now but it's USPS.. that's my first issue I'm worried about.

Also my 4/20/20 order from S&B still hasn't shipped.. What the fuck is going on with them? I remember some of you said you had orders from them well before I did.. did you guys get your orders?

I'm really hoping PIU will just replace the whole Mighty. It really shouldn't have fingerprints behind the screen and shouldn't be dropping 25 degrees between pulls either..

Wouldn't it just be shooting themselves in the foot, to drop all their customer accounts? Of course they are not doing that, and as Alex likely advised, be patient during the transition.

Did you have a pre-printed return label? If so, that would be the logical carrier, right? Or, why would UPS send you away?

I understand it's frustrating to spend this kind of $ and then be so deflated. The USPS, imho, does a pretty awesome job. I send cash through regular mail sometimes, I'm that confident in the service. I'm just as confident in PIU and S&B that this will all end well for you. It is odd to have no shipping from S&B.
If you only had to return the main unit, you'll have double the accessories; they almost always send a boxed unit when replacing.

 

[idboehman]

I thought my PIU account would be lost too with the transfer to the new site so I emailed them and they said I could create a "new" account with my original accounts email and name etc and all my order history would be transferred over to the new site; I can confirm that this worked as they said.

I have a tracking number now but it's USPS.. that's my first issue I'm worried about.

For what it's worth, I have always found USPS more reliable than UPS / FedEx and vastly prefer to use them over private companies if given the option. But to reiterate what vapviking said, it'd be very weird for UPS to send you to USPS unless you had a pre-paid shipping label that was for USPS.

Also my 4/20/20 order from S&B still hasn't shipped.. What the fuck is going on with them? I remember some of you said you had orders from them well before I did.. did you guys get your orders?

I ordered on 4/10 and have still yet to have my order ship either. There was someone else in either the Mighty or Volcano or Volcano Hybrid threads that had ordered on or around 4/10 or 4/20 and has received confirmation that their order has shipped.

 

[disGRUNTled]

 

[Socks And Sandals]

Wouldn't it just be shooting themselves in the foot, to drop all their customer accounts? Of course they are not doing that, and as Alex likely advised, be patient during the transition.
Did you have a pre-printed return label? If so, that would be the logical carrier, right? Or, why would UPS send you away?

I understand it's frustrating to spend this kind of $ and then be so deflated. The USPS, imho, does a pretty awesome job. I send cash through regular mail sometimes, I'm that confident in the service. I'm just as confident in PIU and S&B that this will all end well for you. It is odd to have no shipping from S&B.
If you only had to return the main unit, you'll have double the accessories; they almost always send a boxed unit when replacing.

Thanks for the reassurance! What happened was that the original label from PIU was UPS. I go to the UPS store, I email them the PDF of the label (since my printer was out of ink) and at the very end they tell me to take this to any local post office. I then said, "What? Are you telling me that the Postal service is handling UPS now?" She said yes.. I don't understand it myself.. all I know is that I checked the USPS Tracking number I was given at the post office and It was delivered to PIU today. I just don't understand what happened.. Did they just transfer the label over to USPS with the same info? Hell if I know.. I'm not going to worry about it other than to email PIU the tracking number and let them know it was delivered.

I did a whole lot of Shipping and Receiving back in my day with Fed Ex, UPS, USPS and even DHL. I've never heard of anything like this before is all. But thanks for the reassurance with PIU!

I thought my PIU account would be lost too with the transfer to the new site so I emailed them and they said I could create a "new" account with my original accounts email and name etc and all my order history would be transferred over to the new site; I can confirm that this worked as they said.



For what it's worth, I have always found USPS more reliable than UPS / FedEx and vastly prefer to use them over private companies if given the option. But to reiterate what vapviking said, it'd be very weird for UPS to send you to USPS unless you had a pre-paid shipping label that was for USPS.



I ordered on 4/10 and have still yet to have my order ship either. There was someone else in either the Mighty or Volcano or Volcano Hybrid threads that had ordered on or around 4/10 or 4/20 and has received confirmation that their order has shipped.

Thank you man, I'll try to create an account with that same email address and let you know how it goes. It sucks you didn't receive your order from S&B.. My order was on 4/20 so you should be getting yours before I do. Goodluck!

Edit: IT WORKED.. All my previous purchases are showing! Thanks brother!

 

[BigJr48]

@disGRUNTled I like the whip set up, is it a DIY?

 

[disGRUNTled]

@disGRUNTled I like the whip set up, is it a DIY?

Its a NewVape whip & stand ..

 

[RustyOldNail]

@disGRUNTled I like the whip set up, is it a DIY?

The NV whip uses a metal 14/18mm male/female joint connector, and black silicone hose. You can make your own, I prefer my glass connectors, and clear silicone, easier to see when you need to clean it.

$25 for NV whip:

https://www.newvape.com/products/wh...1&_sid=c86ce5660&_ss=r&variant=32344460558476

 

[sk8man121]

Been a while, y'all, but who is just not fucking with temps anymore and rocking the Mighty at 410 through water? I often wonder if I'm overdoing it in an attempt to "ultra-do" it, as it does lead to coughing fits.

How are you all best extracting large (ie: .5g) loads in your mighty with optimal comfort? These are the things I need to know.

 

[RustyOldNail]

Been a while, y'all, but who is just not fucking with temps anymore and rocking the Mighty at 410 through water? I often wonder if I'm overdoing it in an attempt to "ultra-do" it, as it does lead to coughing fits.

How are you all best extracting large (ie: .5g) loads in your mighty with optimal comfort? These are the things I need to know.

I cough too much at higher temps. And while I can use my separate water rigs, it’s nice to keep the mobility of the Mighty. I bought the “sipper-bubbler”, (link below) for a different device, but along with the Mighty WPA, I can now vape at higher temps without coughing. It surprised me how a tiny bubbler can make a big difference. It’s quite hand holdable.

https://puffitup.com/collections/glass/products/the-sipper-bubbler-mouthpiece

 

[Djsleepy]

Question: are.the cooling units from the mighty and the crafty the same minus the logo? S.and B has Sent two incorrect and the reason is the mighty.labeled incorrectly so now got two cu for crafty do they work the same.they look the same?

 

[RustyOldNail]

Question: are.the cooling units from the mighty and the crafty the same minus the logo? S.and B has Sent two incorrect and the reason is the mighty.labeled incorrectly so now got two cu for crafty do they work the same.they look the same?

???? How can they be the same, the devices are two different sizes. Perhaps, I’m confused on your question?

 

[Djsleepy]

???? How can they be the same, the devices are two different sizes. Perhaps, I’m confused on your question?

I don't have.a.crafty to compare to size , but this cooling unit has the storz and bickel logo not mighty as on all four of my others, I verified that the s and b logo is the crafty and the Mighty says mighty per website...but when I compare to one's I got with s and b logo ,.the cu's seem to match my Mighty cu's in looks, size, hole orientation, etc.

If the cu's aren't.interchangeable, then they must be putting the.wrong logos/lock caps on cu's... Hope that explains

 

[RustyOldNail]

I don't have to crafty to compare to size but this cooling has the storz and bickel logo not mighty as on all four of my others, I verified that the s and b logo is the crafty and the Mighty says mighty per website...but when I compare to one's I got with a and b logo ,.the cu's seem to match my Mighty cu's in looks, size, hole orientation, etc.

If the cu's aren't.interchangeable, then they must be putting the.wrong logos/lock caps I n the wrong bags... Hope that explains

The Crafty is the smaller single battery version. The CU’s are of different sizes. I can’t speak of logos, if it fits on your Mighty, then it’s the right version. Now I’ve heard their are fakes and clones of S&B products, so make sure you buy from reputable dealers.

 

[Djsleepy]

The Crafty is the smaller single battery version. The CU’s are of different sizes. I can’t speak of logos, if it fits on your Mighty, then it’s the right version. Now I’ve heard their are fakes and clones of S&B products, so make sure you buy from reputable dealers.

This is from S and B let me ask this ...are the.lock caps/logo same size?

Edit : after looking at pic of crafty I see what you mean about difference looks like same lock different logos ,so they put a crafty / s and b logo/lock on the mighty cooling units...