condition
Well-Known Member
Regarding 10 ft usb-c cable, does it support >45w charging? If I remember correctly the old ones were very limited.
The Mighty/Mighty+ by Storz & Bickel
- Thread starter Roger D
- Start date
Been Vapin
Fringe Class
Yes, ended up eating 6 capsules. Slept for 13 hours.Did you feel anything? I once tried this but only took 1 capsule (less coconut oil though) but didn't feel much of an effect. Have a nice day!
I agree. Was going to toss or give the oil away, but started to feel sick.to much throat pain to vape or dab. Oil was ready to go. Figured the oil was loaded with cbd and other actives. It was.
Hawaiian
...
Bought the new M+ when it was released. What a brilliant device! I use it everyday now.
I have certain problems with anxiety after vaping. And with time, I found how to manage the high so there's a minimum of side effects. Even without micro-dosing like with my Vapcap. Because, if I microdose with S&B devices, its a lot less enjoyable as a full bowl, imho.
Actually, I vape strains with an average % of THC and 2:1 (CBD:THC).
My strategy is:
I repeat the same steps for 3 sessions, by increasing the temperature for 20-30F each time. So I do my first at 310-330F, then 350-360F and finish at 380-410F.
It might not be enjoyable for everyone. For exemple, if you can do a full bowl in 1 time without any side effects, good for you!
But it could help those, who consume small amounts or rarely.
---
A little bonus song for your sesh!
I have certain problems with anxiety after vaping. And with time, I found how to manage the high so there's a minimum of side effects. Even without micro-dosing like with my Vapcap. Because, if I microdose with S&B devices, its a lot less enjoyable as a full bowl, imho.
Actually, I vape strains with an average % of THC and 2:1 (CBD:THC).
My strategy is:
- Fill the bowl at full
- Set the temp between 310F and 330F (for mornings its the best option, at 330F you'll get more flavor)
- Take 2 or 3 puffs and put it off (I switch off in the middle of 3th)
- Enjoy a moderate, functional, productive buzz (or a more stony, from 357F+)
I repeat the same steps for 3 sessions, by increasing the temperature for 20-30F each time. So I do my first at 310-330F, then 350-360F and finish at 380-410F.
It might not be enjoyable for everyone. For exemple, if you can do a full bowl in 1 time without any side effects, good for you!
But it could help those, who consume small amounts or rarely.
---
A little bonus song for your sesh!
Last edited:
I recommend that you use the dosing capsules. That way you can dump them out right after turning off your Mighty+ so that the herb doesn't keep cooking in between your mini-sessions.
Been Vapin
Fringe Class
Mighty + just randomly had Error 004 while in use. Anyone have this happen?
Beautiful stuff! Glad you're enjoying it!
beyond6strings
Just another traveller in the Cannaverse
My Mighty+ from @Sneaky Pete arrived Saturday and I so get it now.
Put it on a fast charger and was vaporizing in under 90 minutes from opening the box. I set it at 380f and was blown away. I’ve found 375f to be my happy place.
And I just love the dosing capsule. I have 40 and a couple of accessories arriving tomorrow from @VGOODIEZ, and a caddy, WPA, and a filling tray from @Delta3DStudios arriving tomorrow or Wednesday.
I’ve been looking for a reliable portable with a similar vaporquality to my desktop setups, Woodscents and PID controlled Elev8r.
The Might+ delivers that and more.
Put it on a fast charger and was vaporizing in under 90 minutes from opening the box. I set it at 380f and was blown away. I’ve found 375f to be my happy place.
And I just love the dosing capsule. I have 40 and a couple of accessories arriving tomorrow from @VGOODIEZ, and a caddy, WPA, and a filling tray from @Delta3DStudios arriving tomorrow or Wednesday.
I’ve been looking for a reliable portable with a similar vaporquality to my desktop setups, Woodscents and PID controlled Elev8r.
The Might+ delivers that and more.
iammyself
Well-Known Member
I ordered a replacement Mighty+ for my Mighty. I bought it used a couple years ago, and the screen went bad about a year ago. Recently, the battery doesn’t seem to hold the same charge it used to.
So I ordered from Cream City Vapes for $294 before tax and shipping. Sweet deal! I expected it to take a while to receive. I had ordered a Sticky Brick Runt there a couple years ago, and it took almost a month to get. The Mighty+ arrived within a week!
Screen upgrade indeed.
So I ordered from Cream City Vapes for $294 before tax and shipping. Sweet deal! I expected it to take a while to receive. I had ordered a Sticky Brick Runt there a couple years ago, and it took almost a month to get. The Mighty+ arrived within a week!
Screen upgrade indeed.
yep, me. 1month old unit
Hawaiian
...
Oh! isn't good. Try to RMA, they are good at it!
cliffhanger1
Well-Known Member
Received my Mighty+ Medic today.
It comes with USB-C Supercharger and the first load was over 2 hours with it.
How long exactly i dont know. The battery of the device comes at the lowest point.
Had a nice first run with the 3d glass mouthpiece from Vapefiend.
Last edited:
mehh..they want me to send it back to Germany (from australia), so a round-the-world trip & a dismantle?.. I'm humming & hawwing about what to do.. If it doesnt affect performance & lifespan I won't bother, I'll just use as-is rather than the trip & pull apart.
But so far, S&B have been oblique. Not answering my querues through the RMA, not responding to my request to send them video of the fault (they still havent seen it).
Im not even that impressed with the unit, I don't really want a replacement tbh. Wish I bought something else.
I get the feeling S&B's RMA process has been exploited by folk wanting something for nothing, hence the lukewarm response.
Has anyone RMA'd a 004 error & what was the outcome?
Hi! i like your comment, its considered & recent. & I'm wondering, can you tell me if it refers to the same error (004) on the same model (Mighty+) that I've experienced on a 1 month old unit?
How long has your device been doing it/how old is it/is it still trucking?
Most pertinently, how did you come to confidently associate this on/off dct charge error with overheating, & why aren't you concerned about it affecting longevity & performance?
Thanks heaps for your time, Im genuinely curious in what you think. Im a lifer inhaler/insufflater et al, not my first rodeo haha but it is my first S&B product so Ive no grounds for comparison.. I've scraped the web & yours + 2 other semi recent comments mirror my experience, cheers in advance
i would like to know, kind forum humans, if any y'all with a solid, cranking Mighty+ can reproduce error 004 as quickly as this, every time.
It NEVER errors, ANY other time!
I'm suspecting that a significant %age of '21 M+'s do it?? And that its a simple firmware order-of-operations flaw.
If so, ill cancel my RMA!!
Ive inquired directly with but S&B but they are avoiding my questions - oneline reply instructing me to mail it round the world.
May I humbly request intrepid 'nauts replicate my viddy & see what happens?
Literally all Im doing is unplugging/plugging power during heat from cold.
It errors every time, maximum 2 times p/un-p.
Its otherwise a faultless beast. what yall think??
cheers! good community you got here
cliffhanger1
Well-Known Member
Happens it only while it is loading ?Hi! i like your comment, its considered & recent. & I'm wondering, can you tell me if it refers to the same error (004) on the same model (Mighty+) that I've experienced on a 1 month old unit?
How long has your device been doing it/how old is it/is it still trucking?
Most pertinently, how did you come to confidently associate this on/off dct charge error with overheating, & why aren't you concerned about it affecting longevity & performance?
Thanks heaps for your time, Im genuinely curious in what you think. Im a lifer inhaler/insufflater et al, not my first rodeo haha but it is my first S&B product so Ive no grounds for comparison.. I've scraped the web & yours + 2 other semi recent comments mirror my experience, cheers in advance
i would like to know, kind forum humans, if any y'all with a solid, cranking Mighty+ can reproduce error 004 as quickly as this, every time.
It NEVER errors, ANY other time!
I'm suspecting that a significant %age of '21 M+'s do it?? And that its a simple firmware order-of-operations flaw.
If so, ill cancel my RMA!!
Ive inquired directly with but S&B but they are avoiding my questions - oneline reply instructing me to mail it round the world.
May I humbly request intrepid 'nauts replicate my viddy & see what happens?
Literally all Im doing is unplugging/plugging power during heat from cold.
It errors every time, maximum 2 times p/un-p.
Its otherwise a faultless beast. what yall think??
cheers! good community you got here
Which i noticed is that my device shows shortly 1 second strange sign when you plug in the cable.
I haven't had the device on while it's charging.
cheers for following up folks
- ive noticed that 1sec of character glitch when powers connected, pretty common & nothing to worry about imo
- i replicated the error regardless of cable & voltage/amps
cliffhanger1
Well-Known Member
Knows someone if gives it this Adapters in a Version of Hardplastic and not from silicone on the market ?
theherbcafe.com
Delta 3D Studios Mighty+ & Crafty+ Water Pipe Adapter
Delta 3D Studios Mighty and Crafty WPA $29.99 CAD - The Herb Cafe is an Authorized Retailer for D3DS products. Ships from Toronto, Ontario, Canada. No Duty! Fast and Free Shipping Available! Come check out Canada's largest catalog of top quality vaporizers and accessories!
vapviking
Old & In the Way
Knows someone if gives it this Adapters in a Version of Hardplastic and not from silicone on the market ?
Delta 3D Studios Mighty+ & Crafty+ Water Pipe Adapter
Delta 3D Studios Mighty and Crafty WPA $29.99 CAD - The Herb Cafe is an Authorized Retailer for D3DS products. Ships from Toronto, Ontario, Canada. No Duty! Fast and Free Shipping Available! Come check out Canada's largest catalog of top quality vaporizers and accessories!
You've probably seen these? The same store has another, with the steps that let it fit 3 glass sizes.
Crafty and Mighty Vaporizer GonG Adapter
You want to use the Mighty or Crafty Vaporizer on a Bong, Bubbler or small water tool. We offer the fitting for that come in and check it
I don't like the way these mount, nor how far the screen is from the bowl. These can be compensated, but really, I find the Delta3d silicone piece superior. I've had the same one in use for years. The silicone design allows for the adapter, if stressed, to break free without damaging the Mighty.
cliffhanger1
Well-Known Member
This from glass you postet i have already. But i will use the Adapters as mouthpiece not for WPA Adapter.You've probably seen these? The same store has another, with the steps that let it fit 3 glass sizes.
Crafty and Mighty Vaporizer GonG Adapter
You want to use the Mighty or Crafty Vaporizer on a Bong, Bubbler or small water tool. We offer the fitting for that come in and check itverdampftnochmal.de
I don't like the way these mount, nor how far the screen is from the bowl. These can be compensated, but really, I find the Delta3d silicone piece superior. I've had the same one in use for years. The silicone design allows for the adapter, if stressed, to break free without damaging the Mighty.
The 14 glass mouthpiece are good for that, the hot vapor is no problem for me, but the glass gets too hot. (I will test it with Dynavap mouthpiece when it arrives me). The problem is the screen is too much away like you said, but for that i lie one 15 screen above the chamber under the adapter.
Because the glass gets too hot, i wanted to order the silicone one, but i was thinking it is hardplastic. Silicone is not good for the taste i think.
Or knows someone if the silicone WPA gives not a bad taste when using the WPA as mouthpiece. Can someone test it for me ? Please..
Last edited:
vapviking
Old & In the Way
Yeah, I wouldn't enjoy the silicone as a mp, just for the feel of it. But I do think smells and taste from this silicone go away not long after it is made. The maker says soaking in water can get rid of that 'new part' smell.This from glass you postet i have already. But i will use the Adapters as mouthpiece not for WPA Adapter.
The 14 glass mouthpiece are good for that, the hot vapor is no problem for me, but the glass gets too hot. (I will test it with Dynavap mouthpiece when it arrives me). The problem is the screen is too much away like you said, but for that i lie one 15 screen above the chamber under the adapter.
Because the glass gets too hot, i wanted to order the silicone one, but i was thinking it is hardplastic. Silicone is not good for the taste i think.
Or knows someone if the silicone WPA gives not a bad taste when using the WPA as mouthpiece. Can someone test it for me ? Please..
You could use the silicone piece for mounting and insulation + a glass adapter?
2 Pcs Glass Tube Adapter 14mm Female to Male 18mm Essential Adapter: Amazon.com: Industrial & Scientific
2 Pcs Glass Tube Adapter 14mm Female to Male 18mm Essential Adapter: Amazon.com: Industrial & Scientific
www.amazon.com
Or a small j-hook, which is what I prefer for glass.
For the past several months we have really enjoyed the Mighty with the regular cooling unit, and at temps lower that we have for years (in that device). Most bowls now are shared sessions at about 177C with a couple of finishing hits at 190. We're appreciating the flavor more.
We've had to get Mighty to up its' flavor game since it's the last conduction vape in the house!
Petetbay
Well-Known Member
I tried just the silicone wpa, with a glass whip adapter and with a Starry adapter/hula stem. Even at 350*F the adapter alone the vapor was too hot for me, with the whip glass adapter it was better but the glass gets too hot after a few pulls. The hula stem worked good, but turning up to 380*F the glass gets pretty hot, that’s when I remembered I had tried this setup before and had concluded that it was not the way to go. I use the Simrell adapter for DynaVap stems for the cooling unit with a hula stem. I took pics, but just realized attachments still not working. J-hook probably the way to go, you won’t have any heat problems.Or knows someone if the silicone WPA gives not a bad taste when using the WPA as mouthpiece. Can someone test it for me ? Please..
edit: Tried a Gnarly stem, 6” dimpled DV glass stem @ 410*F worked good, got warm but not hot.
Last edited: