The Mighty/Mighty+ by Storz & Bickel

[Vaporcussion]

I will say the vapor is harsher on my throat then expected. Running about 375 - 385 F.

Try the recommended range of 356- 374 (180-190C)

 

[Dramma Lamma]

Heyo, looking for some advice on the battery replacement.

I feel it's time to get it done, but I'm concerned they are going to try to upcharge me as the LCD does not turn on instantly when you power it up, but it does vibrate and the screen normally comes on by the time its heated up. It's probably a joint for the LCD that has gone out and as it heats up it expands to make full contact.

So if they are usually prety nice about overlooking little wonkiness with the unit then it seems a no brainier to get it serviced. But if they are stingy and I'll wind up having to basically pay for a new one then it's not worth it to send it off and I'll just hang on to it till it dies and look at replacing the cells myself which can't be that hard compared to laptop maintenance.

Anyone have any kind of similar situation recently care to share their experience?

 

[biohacker]

Lot of work for nothing more than using it the normal way...trust me...I use water stems and really there is not a lot of difference in my opinion....next year will mark the 50th year I've been enjoying marijuana..

I trust you, but there is a MASSIVE difference with using water filtration IMO. Cooling, filtering, and moisturizing simply do not occur to the same extent with the stock cooling unit.

And what you call work, I call FUN! I like water tools like a third lung, and I get MUCH more out of the experience than using it the normal way as you say! And, don't forget that everyone is different! Some people can combust, hit vapes dry at high temps, and have fucking calluses on their lungs. That's great, but some of us are more sensitive, health conscience, and like the ability to be able to take MASSIVE hits (did you see my EXHALE dude???)..... only 0.1g too.

 

[Ech0_]

I trust you, but there is a MASSIVE difference with using water filtration IMO. Cooling, filtering, and moisturizing simply do not occur to the same extent with the stock cooling unit.

And what you call work, I call FUN! I like water tools like a third lung, and I get MUCH more out of the experience than using it the normal way as you say! And, don't forget that everyone is different! Some people can combust, hit vapes dry at high temps, and have fucking calluses on their lungs. That's great, but some of us are more sensitive, health conscience, and like the ability to be able to take MASSIVE hits (did you see my EXHALE dude???)..... only 0.1g too.

Definitely have to agree with this, with a full bowl in mighty at 180c I cannot directly inhale into the lungs without fighting off gagging, starting at 195 will make me cough almost instantly everytime, literally cannot toke off it... But run the mighty through my "The Honey Bubbler" and I can kick it off at 210c and no issues unless i really go for the stupidly big rips that completely fill my lungs to brim.

 

[Vaporcussion]

And, don't forget that everyone is different!

What a concept! : ))

 

[shredder]

Try the recommended range of 356- 374 (180-190C)

While vaping herb, and depending on the herb, we start at 340F. At that low of a temp you may only get taste and not much vapor, but we gradually go up in temps ending around 380F. You can finish sooner and perhaps get more effects at hotter temps tho.

I prefer low temp vaping because of asthma, but low temp hits are the most flavorable. You do leave more in the abv, but the trade off is less wear and tear on your lungs. Worth it IMHO.

And now the last few months, we mostly vape rosin. With rosin we start at 395F and soon go to 410. The taste stays good until the very end. And it does resin up your cooling unit faster, but you also get more effects.

Whatever style you prefer the mighty (like the "Dude") abides!

 

[SiDankies]

So are the dosing capsules better than using the regular oven?

 

[Aimless Ryan]

Not to me. I think.

 

[Vaporcussion]

While vaping herb, and depending on the herb, we start at 340F. At that low of a temp you may only get taste and not much vapor, but we gradually go up in temps ending around 380F. You can finish sooner and perhaps get more effects at hotter temps tho.

I prefer low temp vaping because of asthma, but low temp hits are the most flavorable. You do leave more in the abv, but the trade off is less wear and tear on your lungs. Worth it IMHO.

And now the last few months, we mostly vape rosin. With rosin we start at 395F and soon go to 410. The taste stays good until the very end. And it does resin up your cooling unit faster, but you also get more effects.

Whatever style you prefer the mighty (like the "Dude") abides!

Hey shredder!
I only wrote that to the person who mentioned the Mighty being harsher than expected, and he was vaping 375 and up. So I figured I'd get him into 356 land.

As for me, I am like you! A low temp vaper......... 333 is my start unless I'm outside, then 345. After multiple bowls, (when the bowl is hot) I even got flavor at 318

What is rosin? I have rosin for my bass bow so I can bow my vibraphone, lol
Is that the same as wax?

So are the dosing capsules better than using the regular oven?

Not better, just different. Definitely more convenient. Super convenient, actually. Effortless dump/reload. You use less material by using a capsule. Some people save their ABV in the capsule unit they get home. Some make/add screens to micro dose in the capsule.
(I prefer to micro dose pouring a small amount into the bowl, and using the mesh pad)
Some take the screen out of the CU because the capsules have screen lids.
Also with capsules, you can also heat the unit to temp, first, then drop the capsule in for no wasted terpenes....

The Mighty is so great because of all the options. Small pack, big pack, moist, dry, coarse grind, fine grind, even nuts! It all works. Try that, Ghost MV1

 

[latulipe999]

So are the dosing capsules better than using the regular oven?

The cleanliness of the regular oven, using dosing capsules, is for me the biggest pro argument. ( specialy in illegal states/country ).

I can leave my home only with my smell-proof caddy full of capsules without grinders and bud.

With dosing caps, the quality of extraction, and the length of the sessions does not change for me.

 

[biohacker]

So are the dosing capsules better than using the regular oven?

Not to me. I think.

Same here, although convenient, I could never replicate the experience I wanted using them. Must be due to more material in oven, and more conduction? I just found the experience somewhat wispier, and weaker.

What is rosin?

Oh boy!

It's the nectar of cannabis gods!

http://fuckcombustion.com/threads/rosin-technique-easy-diy-solventless.17470/

The Mighty is so great because of all the options. Small pack, big pack, moist, dry, coarse grind, fine grind, even nuts! It all works. Try that, Ghost MV1

But the Ghost is supposed to be SO much smoother, even compared to the Mighty's cooling unit! According to some famous reviewers And full convection lol

 

[Tommy10]

Hey bio! Got a mighty love it good to be thread buddy's on another vape haha

Also love the capsuals should ship with heaps! Anyone got a cheap link they are sweet, fit loaded in the back side of the grinder! Also, thought $400 plastic vape was iffy till I held it, thought plastic grinder was not even worth putting in my box! Krauts proved me wrong again! Got maybe 5 grinders wizzer and tend to finger chop a lot! Only been using mighty grinder when I grind, which isn't often! Anyone else's mighty go great with torn bud? Sorry havnt read thread just love this thing.

 

[biohacker]

good to be thread buddy's on another vape haha

Hey bro! We've come along way since the Herbalaire thread eh!? So happy to see you following all of my favourites like the Mighty, Sv3, Grasshopper, etc!

See ya in the Newvape Flowerpot thread next!

 

[Tommy10]

Been in the thread! Couldn't work out Aussie plug enail or any of it so nailed the idea and got an evo. Probably still get a FP at some point though
I can't believe I didn't get s mighty sooner, wasn't so much the money more the perceived value.
Let me tell anyone on the fence, if treating yourself isn't going break the bank and you're just being cheap. The unit is price accordingly for what has so far been superb performance and feel rough as nails. considering I was gonna get a more session like portable regardless, if you're in the same boat and can stretch it but just don't see where the money goes, it's all in there

 

[Razshiro]

Been in the thread! Couldn't work out Aussie plug enail or any of it so nailed the idea and got an evo. Probably still get a FP at some point though
I can't believe I didn't get s mighty sooner, wasn't so much the money more the perceived value.
Let me tell anyone on the fence, if treating yourself isn't going break the bank and you're just being cheap. The unit is price accordingly for what has so far been superb performance and feel rough as nails. considering I was gonna get a more session like portable regardless, if you're in the same boat and can stretch it but just don't see where the money goes, it's all in there

Well said^^, i love my mighty too, best session vape !!! The mighty would be in the arsenal of each "happy vaporist"

 

[Aimless Ryan]

thought plastic grinder was not even worth putting in my box! Krauts proved me wrong again!

Volcano (Mighty) grinder fucking rules. I've had more than a few expensive grinders, and the $5/free Volcano grinder seems to have become my favorite; even though I hate every other 2-piece grinder (big-time manual dexterity issues).

 

[Tommy10]

Yea very glad. I was gonna go the boundless but for $220 Aussie retail vs $400 I feel like money very well spent. Was thinking about sourcing one if the Chinese convection things on the cheap. I really don't mind paying for quality, I also really don't mind getting something you love on the cheap. This is not a purchase I'll ever regret. I probably wouldn't replace it straight away if it broke due to cost. Like say if I lost my VC minimum ordering a glass standard one that day, it's just happening. Bit like if I crashed a bmw uninsured vs my work truck. To others this is a work truck, it is gonna fill a lot of POU that i didn't even consider when purchasing so very practical buy, but to me it is still more of a luxury item that I'm glad I treated myself too. I like tech, don't use a PC hate them, and drones are expensive. From an appreciation of cool gadgets perspective you'll smile every time... Could be worth it to some people right there

 

[vapviking]

A word of caution on the S&B orange plastic grinder. Be on the lookout for tiny bits of the tips going missing. It's happened on more than one grinder I've had and left me wondering Where the fuck did that piece wind up?
So I discontinued use, even though I really like how they work. Went back to trusty old OG Cosmic 4 piece, which pays a dividend over time, in kief...

 

[Mr.Sifter]

Best grinder i know.
Will check for little plastik parts splitting off.

Ok, or i will buy a new one every year.
They are impossible to clean.
Whish they had a clear lid on both sides.
2strains

 

[darbarikanada]

A word of caution on the S&B orange plastic grinder. Be on the lookout for tiny bits of the tips going missing

same thing happened to me once. good grinder, but it's a good thing it's orange, so you can see the broken bits clearly.

 

[Aimless Ryan]

Best grinder i know

I agree.

 

[ktmstick]

A word of caution on the S&B orange plastic grinder. Be on the lookout for tiny bits of the tips going missing. It's happened on more than one grinder I've had and left me wondering Where the fuck did that piece wind up?
So I discontinued use, even though I really like how they work. Went back to trusty old OG Cosmic 4 piece, which pays a dividend over time, in kief...

Have also discontinued use of mine months ago due to the broken bits. Can't think vaping ground up plastic is very good for you.

 

[Vaporcussion]

Oh boy!

It's the nectar of cannabis gods!

Oh no; here we (I) go!

Also love the capsuals should ship with heaps! Anyone got a cheap link they are sweet, fit loaded in the back side of the grinder!

Back of the grinder! Hadn't thought of that for caps, another good option, thanks

Best grinder i know.
Will check for little plastik parts splitting off.

I forgot about that, yes, it happened to me as well, and the piece was so tiny.
The reason I stopped using plastic grinders is half the weed got stuck/absorbed in the plastic, I felt I was losing way more terpenes. So I threw them out. (Sorry Aimless Ryan) However, they are easier to hold/twist because of the molded shape....

I can leave my home only with my smell-proof caddy full of capsules without grinders and bud.

Exactly! And if you like to fill bowls, you can leave home with a smell proof doob tube, (no grinder or capsules) Super easy bowl fill, as it matches the shape of the bowl. The black doob tubes also match the Mighty, looks like a third battery!

 

[Flower of empathy]

haven't got any issues with broken plastic tips, maybe bc i've the habbit of removing almost every small stem before grinding - i like to fill up Havanna (Cannabis) Club bottles with those stems and let them sit a few weeks, gives the rum a nice weed tasting turn (depending on dosage...) and somehow i have the suspicion the hemp fibers absorb some of the fusel alcohols, it tastes less sharp/harsh (pure buds don't do that so much)
Anyone tried cleaning the grinder or even the CU in a dishwasher? (for the rlly lazy ones )
Up to now i only cleaned the grinder with a 15 min bath in warm milk and a sturdy brush with warm water and soap afterwards, works fine

 

[vapviking]

When I used the grinder, for cleaning I would give it a 5 min alcohol soak and then scrub a little with the brush.