newVaper420
Vapor Enthusiast
Yeap. It originally came as Celsius. I switched it to Fahrenheit and never had to again.
The Mighty/Mighty+ by Storz & Bickel
- Thread starter Roger D
- Start date
Yeap. It originally came as Celsius. I switched it to Fahrenheit and never had to again.
Eatrocks
Well-Known Member
Ye same here, stays on F or C once u set it. Have u timed the auto shutoff with your phone to check?
I wonder if the material flies around? I would imagine it to be like a vacuum cleaner, with all the material sucked up against the screen? I think the benefit to smaller bowls isn't so that the material doesn't fly around: it is so it concentrates and increases the air pressure through the material. I'm not a scientist, so I could be full of shit.
TheMadDabber
I ° The Magician
Youre full of shit, you say?....No,I think youre on to something. Many times after taking the cu off I see plenty of material stuck at that top screen. That might be another reason why I have been getting throat and lung irritation. Maybe Im pulling too hard and all those hot bits of plant materials are making their way in my respiratory tract. I do notice that when I take deeper and harder pulls I have irritation, though the temp remains from 170c-175c. I have ordered a water tool and adapter hopefully that woukd remedy the problem. I will be making edibles until I feel better and retest it.
I have yet to tamp it down actually, since Ive read many conflicting statements.
Actually, thats my idea with the capsule that the material would stay in a smaller space. Do you tamp down the material in the capsule? Would it be good to let the capsule sit inside the chamber and heat up before taking a pull? I can imagine the capsule retains a good amount of heat.
By the way, I just read your signature, its pretty funny.lol
Mighty just came back from warranty as brand new machine! I'm loving the 2.0 version isn't it a big smaller also? Feels alot sturdier I'm gonna handle it with silk gloves from now on I LOVE it and S&B 
Is there any other portable that works even nearly as good? Haven't been around and cba to study because mighty will be enough for me
One thing i'm bummed about is buying that vapefiend 'fuck your vape'- mod for 40€ or something but can't always win I'm not sure I will even try it on with my new vape.
Is there any other portable that works even nearly as good? Haven't been around and cba to study because mighty will be enough for me
One thing i'm bummed about is buying that vapefiend 'fuck your vape'- mod for 40€ or something but can't always win I'm not sure I will even try it on with my new vape.
Last edited:
Try a fine screen over your load like my picture on the previous page. The CU nests the screen firmly against the bowl. It may filter more particles. The screen in the CU isn't fine enough for my taste.
TheMadDabber
I ° The Magician
I like this idea too! The liquid pad only recieves minimal heat, so it probably wont transfer that metallic taste I usually get when I put it in the chamber.
HellsWindStaff
Dharma Initiate
What your SN? mines 119xx and I believe they started phasing out the 1 min auto shutoffs to the 2 min auto shutoffs around 15xxx, (June 2015).
If the temp isn't staying at F or C , that's not right, so its good its staying! Like @subway13029 said you can hit +- to switch between the two. Mine came C, switched to F, stayed F until one day when I decided I wanted to switch to C because I was curious to what I was vaping at, switch back to F after and it's stayed
Eatrocks
Well-Known Member
Yea I've never had a weird taste from the pads or a worse draw resistance. The capsules did though.
Got to try a oil in her...mmm...vapes it so good. Just a tiny drop on the liquid pad on top of a thin layer of abv. Oil was completely vaped, shined a light thru the pad and couldn't see any residue and abv was clean as well.
newVaper420
Vapor Enthusiast
What your SN? mines 119xx and I believe they started phasing out the 1 min auto shutoffs to the 2 min auto shutoffs around 15xxx, (June 2015).
If the temp isn't staying at F or C , that's not right, so its good its staying! Like @subway13029 said you can hit +- to switch between the two. Mine came C, switched to F, stayed F until one day when I decided I wanted to switch to C because I was curious to what I was vaping at, switch back to F after and it's stayed
My serial number starts with MY2EKxxx
When the mighty first came out, and according to vape critics review, every time he would turn the unit on and off, it would go back to Celsius. I was just commenting that doesn't happen with mine. Not sure when they fixed it.
I removed the screen in the CU, and just use a fine screen over my load. I find the CU doesn't get as dirty as before. Since what gets trapped in the CU is usually just the condensed vapor (hash oil, terpenes and the like), I generally let it build up so that I can harvest and reuse this decarboxylated, golden nectar.
Within the 1st 4-5 months of issue. I got one when they first came out. It needed to be replaced due to warranty issues, and the firmware on the new unit stayed on choice.
Last edited:
Mr.Sifter
Well-Known Member
stonedbob
100% THC
I use extra screen too, yet I like the taste of a clean vapor
HellsWindStaff
Dharma Initiate
Ahh, I forgot they changed the SN configuration but yours is most definitely a new model, you should time your auto shutoff, for science
Eatrocks
Well-Known Member
Yah I bought a mighty from the same vendor as him prolly 2 weeks before and got a MY044xxx sn.Ahh, I forgot they changed the SN configuration but yours is most definitely a new model, you should time your auto shutoff, for science
It could be to combat the fake mightys.
It doesn't even fit my new unit..well spent 40e got zero hits off of it
Reggie Watts
Well-Known Member
Once a week. I use it about twice a day.
Hey people. Just been offered a trade for a mighty on Craigslist and needed a little expert advice. Is there anything I should look out for? Fakes, what serial numbers are new revisions, tell tale signs of defaults?
Any advice would be welcome, I think I've got space in my line up for one (and as its a trade it's easily justifiable) I just don't want to buy a bunk unit.
Cheers people
Any advice would be welcome, I think I've got space in my line up for one (and as its a trade it's easily justifiable) I just don't want to buy a bunk unit.
Cheers people
Green Kiwi
Well-Known Member
@laavamara , your right, unmodified, it's not a good fit.(if it fits at all).
So my thoughts after receiving them were a bit like :well they(vapefiend)can put this
useless thing were it FITS......
Now if you look at the original CU connection you see 2 lips which closes the connection,
The shape of those lips is what you should try to coppy on your vapefiendadaptor.
i found it very easy to do with a dremelmultitool.
A little file would get the job done too.
So the lips starts low and ends high, at the same time you work from the otherside and do the opposite.
I would love to post you a picture of that but i do have my own private reasons,i really just can't ,sorry.
after this mod. its works and fits perfect.
The reason i went to this trouble is that i have a extreme allergy to epoxy, soooo, no muzzmod. for me.
Even just touching it can send me in to rashes for weeks....(this is a build up allergy after years of yacht building)
I like them sooo much(the 14 and 18mm i use both in different glass pieces)that when i broke one glass,(dropped it on a concrete floor...which resulted in all shattered glass bits), i ordered a few more of each of them.
.P.s. i am a very heavy vaporist,and i haven't broken my mighty yet after 8.5 months of abuse.(do have cracks running though, but that has nothing with the adaptor to do but more with the plastic of the mighty not able to handle the heat of multiple sessions in a row......
)
So my thoughts after receiving them were a bit like :well they(vapefiend)can put this
useless thing were it FITS......
Now if you look at the original CU connection you see 2 lips which closes the connection,
The shape of those lips is what you should try to coppy on your vapefiendadaptor.
i found it very easy to do with a dremelmultitool.
A little file would get the job done too.
So the lips starts low and ends high, at the same time you work from the otherside and do the opposite.
I would love to post you a picture of that but i do have my own private reasons,i really just can't ,sorry.
after this mod. its works and fits perfect.
The reason i went to this trouble is that i have a extreme allergy to epoxy, soooo, no muzzmod. for me.
Even just touching it can send me in to rashes for weeks....(this is a build up allergy after years of yacht building)
I like them sooo much(the 14 and 18mm i use both in different glass pieces)that when i broke one glass,(dropped it on a concrete floor...which resulted in all shattered glass bits), i ordered a few more of each of them.
.P.s. i am a very heavy vaporist,and i haven't broken my mighty yet after 8.5 months of abuse.(do have cracks running though, but that has nothing with the adaptor to do but more with the plastic of the mighty not able to handle the heat of multiple sessions in a row......)
Taz
Tester
I put a cushion tab on my replacement because the vibration wears it off it seems. Actually it is the foam from the pull hangers so I can take it off if needed with no residue.
TheMadDabber
I ° The Magician
Where can I find mods for the mighty ready for a 14mm water tool, or if someone can post their mod, that would be great.
Has anyone used a vapor tamer with the Mighty? How effective is it at cooling down the vapour?and does it retain the same potency?
Has anyone used a vapor tamer with the Mighty? How effective is it at cooling down the vapour?and does it retain the same potency?